PSS150 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS150 Series

150 Watt

FEATURES

  • 2 Year Warranty
  • Low Cost, High Reliability
  • Fixed Switching Frequency
  • Compact Size, Light Weight
  • AC Input Selectable by Switch
  • 100% Full Load Burn-In Tested
  • Cooling by Free Air Convection
  • EN55022, IEC801-2,3,4 and IEC555-2
  • UL1950 and TUV EN60950 Approved
  • Built-In EMI Filter, Low Ripple and Noise
  • High Efficiency, Low Working Temperature
  • Soft Start Circuit, Limiting AC Surge Current
  • Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: PSS150 Series All specifications are based on 25 o C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 88 ~ 132VAC / 176 ~ 264VAC selected by switch (248 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 3.2A @ 115VAC 1.6A @ 230VAC Inrush Current (typical) Cold Start 35A Leakage Current < 3.5mA @ 240VAC OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) PSS-150-5: ±2.0%; Other Models: ±1.0% Voltage Adjustment Range See Table Line Regulation 5 & 7.5V outputs: ±0.5% 9 - 15V outputs: ±0.3% 24 - 48V outputs: ±0.2% Load Regulation 5 & 7.5V outputs: ±0.5% 9 - 15V outputs: ±0.3% 24 - 48V outputs: ±0.2% Output Current See Table Ripple & Noise (max) (See Note 2) See Table Setup, Rise Time 100ms, 50ms @ full load Hold Up Time (typical) 28ms @ full load Temperature Coefficient ±0.03%/°C (0 ~ 50°C) PROTECTION Overload Protection 105 ~ 150% rated output power Protection Type: Shutdown output voltage, re-power on to recover. Over Voltage Protection See Table Protection Type: Shutdown output voltage, re-power on to recover. GENERAL SPECIFICATIONS Switching Frequency 25KHz Efficiency See Table Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10°C to +60°C (refer to output load derating curve) Storage Temperature -20°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Cooling Free air convection Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 286,700 hours min. @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 800 grams Dimensions 199(L) x 110(W) x 50(H) mm Warranty 2 years SAFETY & EMC Safety Standards UL1012, UL60950-1, TUV EN60950-1 Approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light Industry level, criteria A

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS150 Series OUTPUT VOLTAGE / CURRENT RATING CHART Model Number Input Voltage Output Voltage Voltage Adjust. Range Over Voltage Protection Output Current Ripple & Noise Output Power Efficiency PSS-150-5 5 VDC 4.5 ~ 5.5V 5.75 ~ 6. 75V 30A 150mVp-p 150W 78% PSS-150-15 15 VDC 13.5 ~ 16.5V 17.25 ~ 20.3V 10A 180mVp-p 150W 84% PSS-150-24 24 VDC 21 ~ 28V 30 ~ 34.8V 6.5A 240mVp-p 156W 85% PSS-150-27 27 VDC 24 ~ 30V 31.1 ~ 36.45V 5.6A 240mVp-p 151.2W 86% PSS-150-48 88 ~ 132 VAC or 176 ~ 264 VAC 48 VDC 43 ~ 53V 55.2 ~ 64.8V 3.2A 240mVp-p 153.6W 87% NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF& 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. This power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. DERATING CURVE STATIC CHARACTERISTICS (24V)

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS150 Series Unit: mm Terminal Pin No. Assignment Pin No. Assignment

1 AC/L

2 AC/N

4,5 DC OUTPUT (-V) 6,7 DC OUTPUT (+V)