PSQP100 WALL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSQP100 Series
100 Watt Quad Output
Built-In Active PFC Function AC/DC Switching Power Supply
FEATURES
- 3 Year Warranty
- Low Cost, High Reliability
- CH.4: Polarity is Selectable
- Cooling by Free Air Convection
- Universal AC Input / Full Range
- Fixed Switching Frequency at 100KHz
- Built-In Active PFC Function, PF > 0.95
- Soft-Start Circuit, Limiting AC Surge Current
- Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: PSQP100 Series All specifications are based on 25 o C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range (See Note 6) 90 ~ 264VAC (127 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 1.5A @ 115VAC 0.75A @ 230VAC Inrush Current (typical) Cold Start ≤ 40A @ 230VAC Leakage Current < 3.5mA @ 240VAC Power Factor (typical) PF > 0.95 @ 230VAC PF > 0.98 @ 115VAC and full load OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) Voltage Adjustment Range PSQP100B & PSQP100C: CH.1: 4.75 ~ 5.5V Output Current See Table Ripple & Noise (max) (See Note 2) See Table Setup, Rise Time PSQP100B & PSQP100C: 1000ms, 50ms at full load Other Models: 800ms, 50ms @ 230VAC 800ms, 50ms @ 115VAC and full load Hold Up Time (typical) 24ms @ 230VAC 24ms @ 115VAC and full load Temperature Coefficient ±0.03%/°C (0 ~ 50°C) PROTECTION Overload Protection PSQP100B & PSQP100C: 105 ~ 135% rated output power Other Models: 105 ~ 150% rated output power Protection Type: Hiccup mode, recovers automatically after fault condition is removed. Over Voltage Protection PSQP100B & PSQP100C: CH.1 5.75 ~ 6.75V Protection Type: Shutdown output voltage, re-power on to recover. Over Temperature (Option) 95°C ±5°C (TSW1) Protection Type: Shutdown output voltage, recovers automatically after temperature goes down. GENERAL SPECIFICATIONS Efficiency (typical) See Table Switching Frequency 100KHz Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSQP100 Series Built-In Active PFC Function AC/DC Switching Power Supply SPECIFICATIONS (CONTINUED): ENVIRONMENTAL SPECIFICATIONS Working Temperature -10°C to +60°C (refer to output load derating curve) Storage Temperature -20°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Cooling Free air convection Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 139,900 hours min. @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 730 grams Dimensions 199(L) x 99(W) x 50(H) mm Warranty 3 years SAFETY & EMC (See Note 5) Safety Standards UL60950-1, TUV EN60950-1 Approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A OUTPUT VOLTAGE / CURRENT RATING CHART Model Number Input Voltage Output Voltage Rated Output Current Output Current Range Ripple & Noise Rated Output Power Efficiency CH: 1 5 VDC 8A 2 ~ 10A 100mVp-p CH: 2 3.3 VDC 8A 0 ~ 10A 100mVp-p CH: 3 12 VDC 2.5A 0.3 ~ 3A 150mVp-p PSQP1003A CH. 4 90 ~ 264VAC (127 ~ 370VDC) -5 VDC 0.6A 0 ~ 1A 150mVp-p 99.4W 74% CH: 1 5 VDC 8A 2 ~ 10A 100mVp-p CH: 2 3.3 VDC 8A 0 ~ 10A 100mVp-p CH: 3 12 VDC 2.2A 0.3 ~ 3A 150mVp-p PSQP1003B CH. 4 90 ~ 264VAC (127 ~ 370VDC) -12 VDC 0.6A 0 ~ 1A 150mVp-p 100W 74% CH: 1 5 VDC 8A 2 ~ 10A 100mVp-p CH: 2 3.3 VDC 8A 0 ~ 10A 100mVp-p CH: 3 15 VDC 1.7A 0.3 ~ 2A 150mVp-p PSQP1003C CH. 4 90 ~ 264VAC (127 ~ 370VDC) -15 VDC 0.6A 0 ~ 1A 150mVp-p 100.9W 75% CH: 1 5 VDC 8A 2 ~ 10A 100mVp-p CH: 2 3.3 VDC 8A 0 ~ 10A 100mVp-p CH: 3 24 VDC 1.3A 0.3 ~ 2A 150mVp-p PSQP1003D CH. 4 90 ~ 264VAC (127 ~ 370VDC) -12 VDC 0.6A 0 ~ 1A 150mVp-p 104.8W 75% CH: 1 5 VDC 10A 2 ~ 10A 100mVp-p CH: 2 12 VDC 3A 0.3 ~ 4A 150mVp-p CH: 3 -12 VDC 1A 0.15 ~ 1A 150mVp-p PSQP100B CH. 4 90 ~ 264VAC (127 ~ 370VDC) -5 VDC 0.6A 0 ~ 1A 100mVp-p 101W 76% CH: 1 5 VDC 10A 2 ~ 10A 100mVp-p CH: 2 15 VDC 2.2A 0.3 ~ 3A 150mVp-p CH: 3 -15 VDC 1A 0.15 ~ 1A 150mVp-p PSQP100C CH. 4 90 ~ 264VAC (127 ~ 370VDC) -5 VDC 0.6A 0 ~ 1A 100mVp-p 101W 77% CH: 1 5 VDC 8A 2 ~ 10A 120mVp-p CH: 2 12 VDC 2.4A 0 ~ 3A 150mVp-p CH: 3 24 VDC 1A 0.3 ~ 2A 200mVp-p PSQP100D CH. 4 90 ~ 264VAC (127 ~ 370VDC) -12 VDC 0.6A 0 ~ 1A 150mVp-p 100W 78% CH: 1 5 VDC 8A 2 ~ 10A 120mVp-p CH: 2 15 VDC 2A 0 ~ 3A 180mVp-p CH: 3 24 VDC 1A 0.3 ~ 2A 200mVp-p PSQP100F CH. 4 90 ~ 264VAC (127 ~ 370VDC) -15 VDC 0.6A 0 ~ 1A 150mVp-p 103W 78%
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSQP100 Series Built-In Active PFC Function AC/DC Switching Power Supply NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. Line Regulation is measured from low line to high line at rated load. 5. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives 6. Derating may be needed under low input voltages. Please check the derating curve for more details. BLOCK DIAGRAM DERATING CURVE OUTPUT DERATING VS INPUT VOLTAGE fosc: 100KHz
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSQP100 Series Built-In Active PFC Function AC/DC Switching Power Supply MECHANICAL DRAWING Unit: mm Terminal Pin No. Assignment Pin No. Assignment
1 AC/L
2 AC/N
4 DC OUTPUT V4
5 DC OUTPUT V3
6,7 DC OUTPUT V1 8,9 DC OUTPUT COM