PSPW150 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Wall Industries, Inc. Rev A PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies 07/29/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 1 of 4

FEATURES

  • RoHS Compliant
  • Single Outputs
  • PF > 0.9 at 115/230VAC
  • 100 Watts with Convection Cooling
  • 150 Watts with Forced Air Cooling
  • 90~264 VAC Input Voltage Range
  • MTBF > 100,000 Hours
  • High Efficiency up to 85%
  • Over Voltage, Over Load, and Short Circuit Protection
  • UL60950:1, Nemko EN60950:1, & CB IEC60950:1 Safety Approvals
  • 100% Burn:in and Hi:pot Tested
  • Open Frame and U:Chassis Mechanical Options Available

DESCRIPTION

Open Frame (Suffix “:O”) Size: 4.00 x 2.00 x 1.14 inches U:Chassis (Suffix “:U”) Size: 4.12 x 2.24 x 1.38 inches The PSPW150 series of AC/DC power supplies provides 100 Watts of output power with convection cooling and 150 Watts with 12CFM forced airflow. This series consists of 12V, 15V, 19V, 24V, 28V, and 48VDC single output models with a 90:264VAC full range input which enables them to be used anywhere in the world. These supplies also feature a high efficiency up to 85% and a power factor > 0.9 at 115/230VAC. These supplies are also protected against short circuit, over voltage, and over load conditions. The PSPW150 series has UL60950:1, CSA:C22.2 NO.950:1, Nemko EN60950:1, and CB IEC60950:1 safety approvals. This series is also CE marked and meets EN55022 Class B, CISPR22 Class B, and FCC Part 15 Class B EMC standards. Both open frame and U:chassis mechanical options are available for this series. MODEL SELECTION TABLE Output Current Output Power Model Number Input Voltage Output Voltage Convection 12 CFM Forced Air Convection 12 CFM Forced Air Ripple & Noise Output Regulation Package Type PSPW150B:1Y12:O 12 VDC 8.33A 12.5A 100W 150W 150mVp :p ±3% PSPW150B:1Y15:O 15 VDC 6.67A 10A 100W 150W 150mVp:p ±3% PSPW150B:1Y19:O 19 VDC 5.26A 7.89A 100W 150W 190mVp :p ±3% PSPW150B:1Y24:O 24 VDC 4.16A 6.25A 100W 150W 240mVp :p ±3% PSPW150B:1Y28:O 28 VDC 2.77A 4.16A 100W 150W 300mVp :p ±2% PSPW150B:1Y48:O 90 : 264 VAC 48 VDC 2.08A 3.12A 100W 150W 300mVp:p ±2% Open Frame PSPW150B:1Y12:U 12 VDC 8.33A 12.5A 100W 150W 150mVp:p ±3% PSPW150B:1Y15:U 15 VDC 6.67A 10A 100W 150W 150mVp:p ±3% PSPW150B:1Y19:U 19 VDC 5.26A 7.89A 100W 150W 190mVp:p ±3% PSPW150B:1Y24:U 24 VDC 4.16A 6.25A 100W 150W 240mVp:p ±3% PSPW150B:1Y28:U 28 VDC 2.77A 4.16A 100W 150W 300mVp:p ±2% PSPW150B:1Y48:U 90 : 264 VAC 48 VDC 2.08A 3.12A 100W 150W 300mVp:p ±2% U:Chassis DERATING CURVE Convection Cooling: 0 to +60°C derating linearly 2.5% per °C from +41°C to +60°C 12CFM Forced Air: 0 to +70°C derating linearly 2.5% per °C from +51°C to +70°C 100 125 150 0 10 20 30 40 50 60 70 80 Output Power (W) Ambient Temperature (°C) 175 Convection Cooling

12 CFM Forced Air

Wall Industries, Inc. Rev A PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies 07/29/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 2 of 4 SPECIFICATIONS: PSPW150 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Range 90 264 VAC Input Frequency 47 63 Hz 115VAC and full load 2.5 Input Current (rms) 230VAC and full load 1.25 A 115VAC, cold start, 25°C 40 Inrush Current 115VAC, cold start, 25°C 80 A Power Factor Correction 115/230VAC and full load 0.9 OUTPUT SPECIFICATIONS Output Voltage See Table Output Regulation See Table Convection cooling 100 Output Power With 12CFM forced air 150 W Output Current See Table Minimum Load 0 % 12V output model 150 15V output model 150 19V output model 190 24V output model 240 28V output model 300 Ripple & Noise Measured at 20MHz limited bandwidth and with 0.1μF ceramic and 10μF electrolytic capacitors in parallel across the output 48V output model 300 mVp:p Hold:up Time 115VAC and full load 16 ms PROTECTION Over Voltage Protection Automatic recovery Over Load Protection Automatic recovery 105 160 % Short Circuit Protection Automatic recovery GENERAL SPECIFICATIONS Efficiency 115VAC and full load 85 % ENVIRONMENTAL SPECIFICATIONS Convection cooling: 100W (with derating) 0 +60 Operating Temperature 12CFM forced air: 150W (with derating) 0 +70 °C Storage Temperature Range :10 +85 °C Humidity Non:condensing 5 95 % MTBF Full load, 25°C ambient temperature 100,000 hours PHYSICAL SPECIFICATIONS Open Frame Models (Suffix “:O”) 7.27oz (206g) Weight U:Chassis Models (Suffix “:U”) 9.70oz (275g) SAFETY & EMC Safety Approvals UL60950:1, CSA:C22.2 NO.950:1, Nemko EN60950:1, CB IEC60950:1 EMC Standards EN55022 Class B, CISPR22 Class B, FCC Part 15 Class B, CE

Wall Industries, Inc. Rev A PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies 07/29/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 3 of 4 MECHANICAL DRAWING U:CHASSIS MODELS (SUFFIX “:U”) Unit: inches (mm) CN1: INPUT CONNECTOR Pin No. Function

1 AC (N)

2 AC (L)

JST B3P:VH:B pitch: 7.92mm or equivalent, mates with JST VHR:3N or equivalent CN2: OUTPUT CONNECTOR Pin No. Function

1 GND

2 GND

3 GND

JST B6P:VH:B pitch: 3.96mm or equivalent, mates with JST VHR:6N or equivalent 4.12 (104.6) 1.03 (26.1) 2.96 (75.1) 2X M3 P0.5 for mounting CN2 CN1 L N

Wall Industries, Inc. Rev A PSPW150 SERIES Up to 150 Watts, AC/DC Switching Power Supplies 07/29/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 4 of 4 MECHANICAL DRAWING OPEN FRAME MODELS (SUFFIX “:O”) Unit: inches (mm) CN1: INPUT CONNECTOR Pin No. Function JST B3P:VH:B pitch: 7.92mm or equivalent, mates with JST VHR:3N or equivalent 4X Ø0.138 (Ø3.5) mounting holes 4.00 (101.6) 0.14 (3.5) CN1 6CN2 0.14 (3.5) 1.72 (43.8) 2.00 (50.8) 0.12 (3.0) 1.14 (29.0) L N CN2: OUTPUT CONNECTOR Pin No. Function JST B6P:VH:B pitch: 3.96mm or equivalent, mates with JST VHR:6N or equivalent COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in:house research and development engineers will provide a solution that exceeds your performance requirements on:time and on budget. Our ISO9001:2008 certification is just one example of our commitment to producing a high quality, well:documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778:2300 Toll Free: /telephonesolid(888)597:9255 Fax: /telephonesolid(603)778:9797 E:mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833