PSPSP1500 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSPSP1500 Series

1500 Watt Single Output

Built-In Active PFC Function AC/DC Switching Power Supply

FEATURES

  • 3 Year Warranty
  • Low Cost, High Reliability
  • 100% Full Load Burn-In Tested
  • Built-In Remote Sense Function
  • Built-In Remote ON/OFF Control
  • Built-In Active PFC Function, ≥ 0.95
  • AC Input Active Surge Current Limiting
  • Built-In Constant Current Limiting Circuit
  • Built-In Active Current Sharing and Parallel Function
  • Short Circuit, Overload, Over Voltage, and Over Temperature Protected SPECIFICATIONS: PSPSP1500 Series All specifications are based on 25 o C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 176 ~ 264VAC (248 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 8.4A @ 230VAC Inrush Current (typical) 80A @ 230VAC Leakage Current < 3.5mA @ 240VAC Power Factor (typical) 0.96 @ 230VAC and full load Remote ON/OFF Control RC+/RC-: 0 ~ 0.8V = power on; 4 ~ 10V = power off sink current < 30mA OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) 5V output: 6%, 12V output: 3%, 13.5V & 15V outputs: 2%, 24V - 48V outputs: 1% Voltage Adjustment Range See Table Line Regulation 5V output: 0.5%, 12V - 15V outputs: 0.3%, 24V - 48V outputs: 0.2% Load Regulation 5V output: 2.0%, 12V - 48V outputs: 0.5%, Output Current See Table Ripple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p Setup, Rise Time 1500ms, 50ms @ 230VAC and full load Hold Up Time (typical) 24ms @ 230VAC and full load Temperature Coefficient ±0.03%/°C (0 ~ 50°C) PROTECTION Overload Protection 115 ~ 140% rated output power Protection Type: Constant current limiting; recovers automatically after fault condition is removed Over Voltage Protection See Table Protection Type: Shutdown output voltage; re-power on to recover Over Temperature Protection 95°C (TSW1) detect on the heatsink of PFC MOSFET 90°C (TSW2) detect the winding of output choke Protection Type: Shutdown output voltage; recovers automatically after temperature goes down GENERAL SPECIFICATIONS Efficiency (typical) See Table Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10°C to +60°C (refer to output load derating curve) Storage Temperature -20°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 43,400 hours min. @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 6900 grams Dimensions 278(L) x 129(W) x 190.5(H) mm Warranty 3 years SAFETY & EMC Safety Standards UL60950-1, TUV EN60950-1 approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSPSP1500 Series Built-In Active PFC Function AC/DC Switching Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Output Power Model Number Input Voltage Output Voltage Voltage Adjust. Range Over Voltage Protection Output Current Rated Power Peak Load (4) Efficiency PSPSP1500-12 12 VDC 10 ~ 13.2V 13.8 ~ 16.2V 112.5A 1350W 1500W 84% PSPSP1500-15 15 VDC 13.5 ~ 18V 18 ~ 21V 90A 1350W 1500W 84% PSPSP1500-27 27VDC 24 ~ 30V 31 ~ 36.5V 50.4A 1360.8W 1500W 85% PSPSP1500-48 176 ~ 264 VAC (248 ~ 370 VDC) 48 VDC 41 ~ 56V 57.6 ~ 67.2V 28.5A 1368W 1500W 86% NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. 10% Duty cycle maximum within every 30 seconds (max.). Average output power should not exceed the rated power. 5. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. BLOCK DIAGRAM DERATING CURVE OUTPUT DERATING VS INPUT VOLTAGE

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSPSP1500 Series Built-In Active PFC Function AC/DC Switching Power Supply MECHANICAL DRAWING AC INPUT TERMINAL PIN NO. ASSIGNMENT DC OUTPUT TERMINAL PIN NO. ASSIGNMENT Pin No. Assignment Pin No. Assignment

1 AC/L 1, 3, 5 DC OUTPUT +V

2 AC/N 2, 4, 6 DC OUTPUT -V

CONTROL PIN NO. ASSIGNMENT: MOLEX 5559-NP USES 5558 MALE CRIMP TERMINAL Pin No. Assignment Mating Connector Terminal

1 P (Current Share)

4 RC-

8 RC+

Unit: mm