PSPSF-125 WALL | Alldatasheet

Document overview

  • Manufacturer or author: dhoutz
  • PDF pages: 5

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 11/11/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 DATASHEET Rev. F PSPSF-125 SERIES 90 ~ 264VAC Input Voltage Range Up to 126W, Open Frame Single Output, PFC Function AC/DC Switching power Supplies

FEATURES

  • Open Frame
  • PFC > 0.98 @ 115VAC
  • Single Outputs
  • RoHS Compliant
  • UL94V0 Compliant
  • Universal AC Input (Full Range)
  • High Efficiency and High Reliability
  • Built-in Remote Sense Function
  • All Using 105°C Long Life Electrolytic Capacitors
  • 100% Full Load Burn-in Tested
  • Up to 126W Output Power
  • Wide Operating Ambient Temperature (-20°C ~ +70°C)
  • Over Voltage, Over Load, and Short Circuit Protected

DESCRIPTION

The PSPSF-125 series of AC/DC switching power supplies offers up to 126W of output power in a 5” x 3” x 1.2” open frame constructed package. All models have a single output and a universal AC input. Some features include wide operating temperature range (-20°C to +70°C), PFC function > 0.98, and efficiency up to 86%. These supplies are RoHS and UL94V0 compliant and have UL/cUL, CB, and CE safety approvals. All models are protected against over load, over voltage, and short circuit conditions. All models are 100% full load burn-in tested.

Rev. F PSPSF-125 Series Up to 126 Watts Single Output, PFC Function AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 11/11/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 5 SPECIFICATIONS: PSPSF-125 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 90 ~ 264VAC Input Frequency 47 to 63Hz AC Current 1.5A max Inrush Current (typical) 30A @ 115VAC; 60A @ 230VAC Cold Start Leakage Current < 3.5mA Power Factor > 0.98 @ 115VAC; > 0.93 @ 230VAC OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Accuracy ±2.0% Voltage Adjustment Range ±10% of rated output voltage Line Regulation ±0.5% Load Regulation ±2.0% Output Current See Table Ripple & Noise (See Note 1) See Table Setup Time ≤ 2500ms (115VAC, full load); ≤ 1200ms (230VAC, full load) Hold Up Time ≤ 17ms (115/230VAC, full load) Temperature Coefficient ±0.03%/°C Overshoot and Undershoot < 5.0% PROTECTION Over Current Protection 105% ~ 150% of rated output current, hiccup mode, auto-recovery Over Voltage Protection 120% ~ 150% of rated output voltage, hiccup mode Short Circuit Protection Auto-recovery GENERAL SPECIFICATIONS Efficiency (typical) See Table Primary to Secondary 3000VAC; ≤ 10mA Primary to PG 1500VAC; ≤ 10mA Withstand Voltage Secondary to PG 500VDC; ≤ 10mA Isolation Resistance 100M Ω ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature -20°C to +70°C (with derating) Storage Temperature -40°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH non-condensing Cooling Method Free air convection MTBF (MIL-HDBK-217F) > 100,000 hours @ 25°C and full load PHYSICAL SPECIFICATIONS Dimensions (L x W x H) 5.0 x 3.0 x 1.2 inches (127 x 76 x 30.5 mm) Weight 14.2oz (402.85g) Flammability UL94V0 SAFETY & EMC (See Note 2) Safety Standards GB4943-2001, EN60950-1: 2006 EMI Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A

Rev. F PSPSF-125 Series Up to 126 Watts Single Output, PFC Function AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 11/11/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 MODEL SELECTION TABLE Efficiency Model Number Input Voltage Output Voltage Output Current Ripple & Noise (1) Output Power 115VAC 230VAC PSPSF-125-5 5 VDC 20A 100mV 100W 82% 84% PSPSF-125-12 12 VDC 10.5A 100mV 126W 85% 87% PSPSF-125-15 15 VDC 8.4A 100mV 126W 85% 87% PSPSF-125-24 24 VDC 5.2A 100mV 124.8W 85% 87% PSPSF-125-48 90 ~ 264 VAC 48 VDC 2.6A 150mV 124.8W 86% 88% NOTES 1. Ripple & noise was measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with 0.1µF and 47 µF capacitors in parallel. 2. The SPS is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. DERATING CURVES BLOCK DIAGRAM EMI FILTER RECTIFIERS PWM & PFC CONTROL FEEDBACK DETECTION CIRCUIT PFC CIRCUIT POWER SWITCHING RECTIFIERS FILTER O.L.P. O.V.P. I/P FG AMBIENT TEMPERATURE (° C) (HORIZONTAL) LOAD (%) INPUT VOLTAGE (V) 50/60Hz LOAD (%) OUTPUT DERATING OUTPUT DERATING VS INPUT VOLTAGE

Rev. F PSPSF-125 Series Up to 126 Watts Single Output, PFC Function AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 11/11/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 MECHANICAL DRAWING Unit: inches (mm) 5.0 (127) 4.55 (115.6) 3.0 (76) 2.55 (64.8) 0.16 (3.96) 0.22 (5.6) 0.16 (3.96) 4 * Ø 0.14 (3.6) CON1 T3.15A 2 50VAC N L LED CON2 CON3 V ADJ ITEM CONNECTORS MATING HOUSING CONTACTS AC IN (CON1) LANDWIN3961P0300T (Central Pin Removed) DC OUT (CON2) LANDWIN 3961P0800T LANDWIN 3960S or JST VHR or Molex 51144 LANDWIN 3963T011R or JST SVH-21T-P1.1 or Molex 50539 SENSE (CON3) LANDWIN 2541P0200T LANDWIN 2510S or MO LEX 5051 LANDWIN 2563T011X or MOLEX 4809

Rev. F PSPSF-125 Series Up to 126 Watts Single Output, PFC Function AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 11/11/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone : /telephonesolid(603)778-2300 Toll Free : /telephonesolid(888)597-9255 Fax : /telephonesolid(603)778-9797 E-mail : sales@wallindustries.com Web : www.wallindustries.com Address : 5 Watson Brook Rd. Exeter, NH 03833