PSMTC WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Wall Industries, Inc. Rev E PSMTC SERIES

15 Watt Medical AC/DC Switching Power Supplies

10/24/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 1 of 4

FEATURES

  • RoHS Compliant
  • Isolation Class II
  • 15 Watts Output Power
  • Low Ripple and Noise
  • Single, Dual, and Triple Outputs
  • Fully Encapsulated Plastic Case
  • 4000VAC I/O Isolation
  • PCB Mountable Switching Power Supply
  • :25°C to +70°C Operating Temperature Range
  • Optional :40°C to +70°C Operating Temperature Range
  • Free Air Convection Cooling
  • Protection: SCP / OCP / OVP / OTP
  • Universal Input Voltage Range: 90~264VAC (120~375VDC)
  • UL/cUL60601:1, IEC60601:1, EC60601:1 Medical Approv als

DESCRIPTION

Size: Weight: 2.52 x 1.79 x 0.92 inches 4.23oz (120g) 64.0 x 45.6 x 23.5 mm The PSMTC series of medical AC/DC switching power supplies provides 15 watts of output power in a 2.52” x 1.79” x 0.92” encapsulated PCB mountable package. This series consists of single, dual, and triple output models with a universal input range of 90~264VAC (120~375VDC). Some features include low ripple and noise, :25°C to +70°C operating temperature range, and short circuit, over current, over voltage, and over temperature protection. The PSMTC series also offers an extended operating temperature range of :40°C to +70°C (“:E1” suffix). All models are RoHS compliant and have UL/cUL60601:1, IEC60601:1, and EC60601:1 medic al approvals. MODEL SELECTION TABLE SINGLE OUTPUT MODELS Output Current Model Number Input Voltage Output Voltage Min Load Max Load Voltage Accuracy Line Regulation Load Regulation (0% : 100%) Output Power Efficiency Maximum Capacitive Load PSMTC:3.3S 3.3 VDC 0% 3000mA ±2% 0.5% 1% 9.9W 75% 4 0,000μF PSMTC:5S 5 VDC 0% 3000mA ±2% 0.5% 1% 15W 79% 10,000μF PSMTC:7.35S 7.35 VDC 0% 2040mA ±2% 0.5% 1% 15W 79% 4700µF PSMTC:9S 9 VDC 0% 1666mA ±2% 0.5% 1% 15W 80% 3000µF PSMTC:12S 12 VDC 0% 1250mA ±2% 0.5% 1% 15W 81% 1100 μF PSMTC:15S 15 VDC 0% 1000mA ±2% 0.5% 1% 15W 82% 1000μF PSMTC:24S 90~264 VAC (120~375 VDC) 24 VDC 0% 625mA ±2% 0.5% 1% 15W 83% 820μF DUAL OUTPUT MODELS Output Current Model Number Output Voltage Min Load (1) Max Load Voltage Accuracy Line Regulation Load Regulation (10% : 100%) Cross Regulation Output Power Efficiency Maximum Capacitive Load Vo 1 +5 VDC 1500mA ±2% 0.5% 1% (sym. load) 5% 4700µF PSMTC:5D Vo 2 :5 VDC 10% 1500mA ±2% 0.5% 1% (sym. load) 5% 15W 79% 4700µF Vo 1 +12 VDC 625mA ±2% 0.5% 1% (sym. load) 3% 560µF PSMTC:12D Vo 2 :12 VDC 10% 625mA ±2% 0.5% 1% (sym. load) 3% 15W 82% 560µF Vo 1 +15 VDC 500mA ±2% 0.5% 1% (sym. load) 3% 500µF PSMTC:15D Vo 2 :15 VDC 10% 500mA ±2% 0.5% 1% (sym. load) 3% 15W 82% 500µF TRIPLE OUTPUT MODELS Output Current Model Number Output Voltage Min Load (1) Max Load Voltage Accuracy Line Regulation Load Regulation (10% : 100%) Cross Regulation Output Power Efficiency Maximum Capacitive Load Vo 1 5 VDC 2000mA ±2% 0.5% 1% 1% 1000μF Vo 2 +12 VDC 200mA ±3% 2% 5% (sym. load) 5% 470μF PSMTC:5S12D Vo 3 :12 VDC 25% 200mA ±3% 2% 5% (sym. load) 5% 15W 78% 470μF Vo 1 5 VDC 2000mA ±2% 0.5% 1% 1% 1000μF Vo 2 +15 VDC 150mA ±3% 2% 5% (sym. load) 5% 600μF PSMTC:5S15D Vo 3 :15 VDC 25% 150mA ±3% 2% 5% (sym. load) 5% 15W 78% 600μF NOTES 1. Some models require a minimum loading on the output to maintain specified regulations. Operation under no:load conditions will not damage these devices; however, they may not meet all listed spe cifications. 2. For :40°C to +71°C extended operating temperature range please add the suffix –E1 to the model number (Ex: PSMTC:12S:E1).

Wall Industries, Inc. Rev E PSMTC SERIES 10/24/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 2 of 4 TECHNICAL SPECIFICATIONS: PSMTC SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS AC input voltage range 90 264 VAC Input Voltage DC input voltage range 120 375 VDC Input Frequency 47 440 Hz At 115VAC and full load 220 Input Current At 230VAC and full load 118 mA At 115VAC 10 Standard Models At 230VAC 20 A At 115VAC 23 Inrush Current (<2ms) :E1 Suffix Models At 230VAC 46 A External Fuse (recommended) 2.0A slow blow type OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Accuracy See Table Line Regulation Low Line to High Line See Table Load Regulation See Table Cross Regulation See Table Output Power 15 W Output Current See Table Minimum Load See Table Ripple & Noise Measured at 20MHz BW with 0.1µF and 4 7µF capacitors in parallel 1 %Vo Max Capacitive Load See Table Hold:Up Time 20 ms Temperature Coefficient ±0.01 %/°C PROTECTION Short Circuit Protection Hiccup mode, indefinite (auto:recovery) Over Voltage Protection Zener diode clamp Over Current Protection Above 105% rated output power Over Temperature Protection 100 °C GENERAL SPECIFICATIONS Efficiency See Table Switching Frequency 132 KHz Isolation Voltage (Input to Output) 4000 VAC At 115VAC and full load 0.1 Earth Ground Leakage Current At 230VAC and full load 0.2 mA At 240VAC, 63Hz, and full load 0.055 Enclosure Leakage Current At 264VAC, 63Hz, and full load 0.06 mA ENVIRONMENTAL SPECIFICATIONS Standard Models :25 +70 Operating Temperature :E1 Suffix Models :40 +70 °C Case Temperature +95 °C Storage Temperature :40 +85 °C Humidity 95 % RH Cooling Free air convection MTBF At 25°C 200,000 400,000 hours PHYSICAL SPECIFICATIONS Weight 4.23oz (120g) Case Material Flammability to UL 94V:0 Plastic resin + fiberglass SAFETY & EMC Class II To IEC / EN 60536 EMI EN55011 Class B EMC Standards EN60601:1:2 ESD Susceptibility EN60601:1:2 Radiated Susceptibility EN60601:1:2 EFT / Burst EN60601:1:2 Surge EN60601:1:2 Conducted Susceptibility EN60601:1:2 Safety Approvals UL/cUL60601:1, IEC60601:1, EC60601:1, CB Approvals ANSI/AAMI ES 60601:1: 2005, 1st Edition and CAN/CSA:C22.2 No. 60601:1:08, 2nd Edition, MOPP

Wall Industries, Inc. Rev E PSMTC SERIES 10/24/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 3 of 4 BLOCK DIAGRAMS Single Output Dual Output RECTIFIER SWITCHING RECTIFIER LINE FILTER INPUT CONTROL OSCILLATION O.C.P . DETECT OUTPUT O.V.P . L N SWITCHING RECTIFIER LINE FILTER CONTROL OSCILLATION O.C.P . DETECT OUTPUT COM L N INPUT RECTIFIER RECTIFIER Triple Output CONTROL OSCILLATION O.C.P . DETECT OUTPUT SWITCHING RECTIFIER LINE FILTER L N INPUT RECTIFIER RECTIFIER RECTIFIER O.V.P . +5V G COM DERATING CURVES Standard Models “:E1” Suffix Models 100 120 -25 -20 0 20 40 60 70 80 100 Output Power (%) Ambient Temperature (°C) 100 120 -40 -20 0 20 40 60 70 80 100 Output Power (%) Ambient Temperature (°C) 25% -25 Triple Output Models 90 Others

Wall Industries, Inc. Rev E PSMTC SERIES 10/24/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 4 of 4 MECHANICAL DRAWING 2.52 (64.0) 2.13 (54.0) 1.79 (45.6) 0.92 (23.5) 0.16 (4.0) 0.69 (17.5) 0.39 (10.0) 0.24 (6.0) 0.04 (1.0) Unit: inches (mm) Tolerance: ±0.02” (±0.5mm) 0.24 (6.0) TOP VIEW 0.39 (10.0) 0.69 (17.5) 0.29 (7.5) 0.49 (12.5) 0.69 (17.5) PIN CONNECTIONS PIN SINGLE DUAL TRIPLE

1 NO PIN NO PIN NO PIN

2 AC IN (L) AC IN (L) AC IN (L)

3 AC IN (N) AC IN (N) AC IN (N)

5 NO PIN COMMON +5V OUT

6 NO PIN NO PIN -DC OUT

8 NO PIN NO PIN COMMON

9 NO PIN NO PIN +DC OUT

Wall Industries, Inc. has created custom and modified units for over 50 years. Our in:house research and development engineers will provide a solution that exceeds your performance requirements on:time and on budget. Our ISO9001:2008 certification is just one example of our commitment to producing a high quality, well:documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778:2300 Toll Free: /telephonesolid(888)597:9255 Fax: /telephonesolid(603)778:9797 E:mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833