Microsoft Word - PSMHBU31.doc

Document overview

  • Manufacturer or author: dhoutz
  • PDF pages: 2

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSMHBU31 Series Open Frame

30 Watt, Single Output

AC/DC Medical Power Supply Rev A

FEATURES

  • Single Output
  • RoHS Compliant
  • Class II Insulation
  • Internal EMI Filter
  • Dimensions: 4 x 1.5 x 0.83 Inches
  • Output Voltages Available from 5VDC thru 40VDC
  • Wide Input Voltage Range: 90 to 264VAC, 47 to 63Hz
  • Input Surge Current, Over Voltage, and Over Load Protection

DESCRIPTION

The PSMHBU31 series of AC/DC medical power supplies provides 30 Watts of continuous output power in a compact, open frame constructed design. All models have a single output and a universal input. These power supplies meet FCC Part-18 class B and CI SPR-11 EN55011 class B emission limits. They are also designed to comp ly with UL/cUL (UL60601-1), TUV/T-mark (EN60601-1) and new CE requirements. This series is best suited for use in Home health care applications. All models are 100% burn in tested. SPECIFICATIONS: PSMHBU31 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT (Vin) Operating Voltage Range 90 264 VAC Input Frequency 47 63 Hz Input Current (Low Line) Io = Full Load, Vin = 115VAC 0.8 A Input Current (High Line) Io = Full Load, Vin = 230VAC 0.3 0.4 A Inrush Current (Low Line) Io = Full Load, 25°C, Cool Start, Vin = 115VAC 15 18 A Inrush Current (High Line) Io = Full Load, 25°C, Cool Start, Vin = 230VAC 25 40 A Safety Ground Leakage Current Io = Full Load, Vin = 240VAC 0.1 0.3 mA Start-Up Time Io = Full Load, Vin = 100VAC 0.25 0.5 s OUTPUT (Vo) Output Voltage See Table Load Regulation Vin = 230VAC 3 5 % Line Regulation Io = Full Load 0.5 1 % Output Power Vin = 90 to 264VAC 0 30 W Output Current See Table Ripple & Noise (peak to peak) Full Load, Vin = 90VAC 0.5 1 % Transient Response Time Io = Full Load to Half Load, Vin = 100VAC 4 ms Hold-Up Time Io = Full Load, Vin = 110VAC 12 18 ms PROTECTION Over Current Protection 110 150 % GENERAL Efficiency Io = Full Load, Vin = 230VAC 75 85 89 % Dielectric Withstanding Voltage For Primary to Secondary Primary to Secondary 5600 VDC ENVIRONMENTAL Operating Temperature Derate linearly from 100% Load at 40°C to 50% load at 70°C 0 40 +70 °C Storage Temperature -40 +85 °C Relative Humidity 5 95 % Temperature Coefficient -0.04 +0.04 %/°C MTBF Operating temperature at 25°C, Calculated per MIL-HDBK-217F 100,000 hours PHYSICAL Weight Approximately 7oz (200g) Dimensions (L x W x H) 4.02 x 1.50 x 0.83 inches 102.0 x 38.1 x 21.0 mm SAFETY EMI Requirements for CISPR-11 Vin = 220VAC B Class EMI Requirements for FCC PART-18 Vin = 110VAC B Class

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSMHBU31 Series Open Frame AC/DC Medical Power Supply Rev A MODEL SELECTION TABLE Model Number Input Voltage Range Preset Voltage Output Voltage Range Output Current Range Total Regulation Maximum Output Power PSMHBU31-102 90~264 VAC 5 VDC 5 ~ 6VDC 4.00 ~ 3.33A 5% 20W PSMHBU31-103 90~264 VAC 6 VDC 6 ~ 8VDC 3.83 ~ 2.87A 5% 23W PSMHBU31-104 90~264 VAC 8 VDC 8 ~ 11VDC 3.37 ~ 2.45A 5% 27W PSMHBU31-105 90~264 VAC 11 VDC 11 ~ 13VDC 2.72 ~ 2.31A 5% 30W PSMHBU31-106 90~264 VAC 13 VDC 13 ~ 16VDC 2.31 ~ 1.88A 5% 30W PSMHBU31-107 90~264 VAC 16 VDC 16 ~ 21VDC 1.88 ~ 1.43A 5% 30W PSMHBU31-108 90~264 VAC 21 VDC 21 ~ 27VDC 1.43 ~ 1.12A 5% 30W PSMHBU31-109 90~264 VAC 27 VDC 27 ~ 33VDC 1.12 ~ 0.91A 5% 30W PSMHBU31-110 90~264 VAC 33 VDC 33 ~ 40VDC 0.91 ~ 0.76A 5% 30W NOTES 1. The output voltage is specified as a r ange (Ex: 33 ~ 40VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. Input connector mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal. 3. Output connector mates with Molex housing 09-50-3041 and Molex 2478 series crimp terminal. MECHANICAL DRAWING Unit: mm [inches] NOTES: 1. Weight: Approximately 7oz (200g) 2. Input connector mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal. 3. Output connector mates with Molex housing 09-50-3041 and Molex 2478 series crimp terminal. Pitch=3.96 [0.16] LED L N DC OUTPUT AC INPUT