PSME05 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 02/05/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 DATASHEET Rev. B PSME 05 SERIES 85~264VAC (125~373VDC) Input Voltage Range

5 Watts, Encapsulated PCB Mount

Single Outputs, Isolation Class II Medical AC/DC Switching Power Supplies

FEATURES

  • Isolation Class II
  • Fully Isolated Plastic Case
  • Single Outputs
  • 100% Full Load Burn-in Tested
  • Cooling by Free Air Convection
  • RoHS Compliant
  • Energy Star Compliant
  • 5 Watts Output Power
  • Withstand 2G Vibration Test
  • Universal Input Voltage: 85~264VAC or 125~373VDC
  • All Using 105°C Long Life Electrolytic Capacitors
  • -20°C ~ +70°C Wide Operating Temperature Range
  • Short Circuit, Over Load, Over Voltage, and Brown-out (Low AC Input Voltage) Protection
  • Green Design, No-Load Power Consumption < 0.3W
  • UL60601-1, TUV EN60601-1, and IEC60601-1 Medical Approvals

DESCRIPTION

The PSME05 series of Medical AC/DC switching power supplies provides 5 Watts of continuous output power in a 2.475” x 1.97” x 0.776” encapsulated PCB mountable package. This series consists of 5V, 12V, 15V, and 24VDC output mod els with a universal input voltage range of 85~264VAC or 125~373VDC. These power supplies are protected against short circuit, over load, over voltage, and brown-out (low AC input voltage) conditions and have an MTBF of 217,4 00 hours using MIL-HDBK-217F. This series also has UL60601-1, TUV EN60601-1, and IEC60601-1 medical approvals. All models have been 100% full load burn-in tested and are RoHS and Energy Star compliant. MEDICAL

Rev. B PSME05 Series Single Outputs, Isolation Class II Medical AC/DC Switching Power Supplies Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 02/05/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 SPECIFICATIONS: PSME05 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS AC Input Voltage Range 85 264 VAC Input Voltage Range DC Input Voltage Range 125 373 VDC Input Frequency 47 63 Hz Low Line Full Load, Vin = 115VAC 0.13 Input Current High Line Full Load, Vin = 230VAC 0.08 A Low Line Cold Start, Vin = 115VAC 25 Inrush Current High Line Cold Start, Vin = 230VAC 45 A No Load Power Consumption 0.3 W OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Tolerance -3 +5 % 5VDC output model -1 +1 Load Regulation 12V, 15V, & 24VDC output models 10% to 100% rated load -0.5 +0.5 % Line Regulation Low Line to High Line at rated load -0.5 +0.5 % Output Power 0 5 W Output Current See Table Ripple & Noise (See Note 1) See Table Low Line Full Load, Vin = 115VAC 25 Hold-Up Time High Line Full Load, Vin = 230VAC 100 ms Setup Time (See Note 3) Full Load, Vin = 115/230VAC 100 ms Rise Time Full Load, Vin = 115/230VAC 25 ms Temperature Coefficient 0~50°C -0.03 +0.03 %/°C PROTECTION Over Voltage Protection Latch-off mode 115 145 % Over Load Protection Hiccup mode, recovers automatically after fault condition is removed 110 % Short Circuit yes Brown-out (Low AC Input Voltage) yes GENERAL SPECIFICATIONS Efficiency Vin = 230VAC See Table Withstand Voltage (Input to Output) 4000 VAC Isolation Resistance (Input to Output) 500VDC 100 M Ω ENVIRONMENTAL SPECIFICATIONS Operating Temperature With derating (see derating curve) -20 +70 °C Storage Temperature -40 +85 °C Operating Humidity Non-condensing 20 90 % RH Storage Humidity 10 95 % RH Vibration 10~500Hz, 2G 10min/1cycle, period for 60 min each along X, Y, and Z axes Cooling Free air convection MTBF MIL-HDBK-217F 217,400 hours PHYSICAL SPECIFICATIONS Weight Approximately 1.16oz (33g) Dimensions (L x W x H) 2.475 x 1.97 x 0.776 inches (62.85 x 50 x 19.7 mm) SAFETY & EMC Safety Approvals UL60601-1, TUV EN60601-1, and IEC60601-1 EMI Conduction & Radiation EN55011: 2007+A2: 2007 Class B Harmonic Current EN61000-3-2: 2006 Class A, EN61000-3-3: 1995+A1: 2001+A2: 2005 EMS Immunity EN60601-1-2: 2001+A1: 2006, IEC61000-4-2,3,4,5,6,8,11 light industry level, criteria A

Rev. B PSME05 Series Single Outputs, Isolation Class II Medical AC/DC Switching Power Supplies Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 02/05/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Ripple & Noise (1) Efficiency Output Power PSME-05-05 5 VDC 1A 100mVp-p 71% 5W PSME-05-12 12 VDC 0.42A 150mVp-p 75% 5W PSME-05-15 15 VDC 0.33A 150mVp-p 75% 5W PSME-05-24 85 ~ 264 VAC or 125 ~ 373 VDC 24 VDC 0.21A 240mVp-p 77% 5W NOTES 1. Ripple & noise is measured at 20MHz bandwidth by using 12" twisted pair-wire terminated with 0.1µF and 47µF capacitors in parallel. 2. Tolerance includes set up tolerance, line regulation, and load regulation. 3. The length of the setup time is measured a first cold start. Turning the power supply ON and OFF very quickly may lead to an increase in the setup time. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. BLOCK DIAGRAM I/P EMI FILTER RECTIFIERS FILTER POWER SWITCHING PWM CONTROL RECTIFIERS FILTER DETECTION CIRCUIT DERATING CURVE Ta=25°C 100 110 120 264 Load (%) Load vs Input Voltage Input Voltage (VAC) 100 -20 Ambient Temperature (°C) 0 10 20 30 40 50 60 70 100Load (%) Load vs Temperature

Rev. B PSME05 Series Single Outputs, Isolation Class II Medical AC/DC Switching Power Supplies Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 02/05/2013 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4 MECHANICAL DRAWING BOTTOM VIEW AC/N AC/L Unit: inches (mm) 2.475 (62.85) 1.85 (47) 0.306 (7.8) 0.689 (17.5) 0.295 (7.5) 1.97 (50) 0.776 (19.7) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone : (603)778-2300 Toll Free : (888)597-9255 Fax : (603)778-9797 E-mail : sales@wallindustries.com Web : www.wallindustries.com Address : 5 Watson Brook Rd. Exeter, NH 03833