Microsoft Word - PSMBU152.doc
Document overview
- Manufacturer or author: dhoutz
- PDF pages: 3
Technical content
Wall Industries, Inc. Rev A PSMBU152 SERIES 150W Medical AC/DC Open Frame Power Supplies 11/18/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 3
FEATURES
Class I RoHS Compliant Active Power Factor Correction 5” x 3” x 1.44” Open Frame Package 12VDC & 24VDC Single Outputs 150 Watts Output Power Input to Output: 2MOPP Up to 89% High Efficiency Wide Input Voltage Range: 90~260VAC, 47~63Hz Over Voltage & Over Current Protection Meets FCC Part-18 Class B & CISPR-11 EN55011 Class B Emission Limits ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd Edition) & EN 60601-1: 2006 (TUV/T-mark 3rd Edition) 100% Burn-in Tested
DESCRIPTION
Size: 5.00 x 3.00 x 1.44 inches 127.0 x 76.2 x 36.6 mm The PSMBU152 series of class I medical AC/DC switching powe r supplies provides 150 Watts of continuous output power in a 5.00” x 3.00” x 1.44” open frame package. This series consists of 12VDC and 24VDC single output models with a wide input voltage range of 90~260VAC. Some features include high efficiency up to 89%, active power factor correction, 2MOPP insulation, and over current and over voltage protection. All models meet FCC Part-18 class B and CISPR-11 EN55011 class B emission limits. This series also has ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition) and EN 60601-1: 2006 (TUV/T-mark 3rd edition) medical approvals. All models are RoHS compliant and have been 100% burn-in tested. SPECIFICATIONS: PSMBU152 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range 100 240 Input Voltage Operating Input Voltage Range 90 260 VAC Input Frequency 47 63 Hz 100VAC, full load 1.74 1.76 Input Current 240VAC, full load 0.71 0.73 A 115VAC, full load, 25°C, cold start 50 Inrush Current 230VAC, full load, 25°C, cold start 100 A No Load Power Consumption 230VAC, no load 1.2 W Power Factor Correction 240VAC, full load 0.95 1 OUTPUT SPECIFICATIONS Output Voltage See Table Line Regulation LL to HL, full load 0.5 1 % Load Regulation 230VAC 3 5 % Output Power 150 W Output Current See Table Ripple & Noise (peak to peak) 90VAC, full load 1 % Hold-up Time 110VAC, full load 20 ms Start-up Time 100VAC, full load 2 s Transient Response Time 100VAC, Ful l load to half load 4 ms Temperature Coefficient 0~50°C -0.04 +0.04 %/°C PROTECTION Over Voltage Protection 112 132 % Over Current Protection 110 150 % GENERAL SPECIFICATIONS Efficiency 230VAC, full load 84 89 % Primary to Secondary (2MOPP Insulation) 6990 Dielectric Withstanding Voltage Primary to PE 2121 VDC Isolation Resistance Test Voltage = 500VDC 50 MΩ Leakage Current 240VAC/60Hz 0.25 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derating linearly from 100% Load at 50°C to 50% load at 70°C 0 +70 °C Storage Temperature -40 +85 °C Operating Humidity 0 95 % Storage Humidity 0 95 % Operating Altitude 3000 m Cooling Free air convection MTBF MIL-HDBK-217F, 25°C 100,000 hours PHYSICAL SPECIFICATIONS Weight 14.82oz (420g) Input Connector See mechanical drawing Output Connector See mechanical drawing SAFETY & EMC Safety Approvals ANSI/AAMI ES 60601- 1: 2005 (UL/cUL 3rd edition); EN 60601-1:2006 (TUV/T-mark 3rd edition); CE EMI Requirements for CISPR-11 220VAC B Class EMI Requirements for FCC PART-18 110VAC B Class
Wall Industries, Inc. Rev A PSMBU152 SERIES 150W Medical AC/DC Open Frame Power Supplies 11/18/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 3 MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Ripple & Noise Total Regulation Output Power PSMBU152-105 12 VDC 12.5A 120mVp-p 5% 150W PSMBU152-108 90 ~ 260 VAC 24 VDC 6.25A 240mVp-p 3% 150W DERATING Ambient Temperature (°C) Output Power (%) 0 10 20 30 40 50 60 70 80 120 100 NOTES: 1. Operating Temperature: 0°C to +70°C 2. Derating linearly from 100% load at 50°C to 50% load at 70°C MECHANICAL DRAWING 1.17 [29.6] M3*P0.5 MOUNTING HOLES x 2 1.44 [36.6] 0.06 [1.6] 0.12 [3.0] PITCH = 3.96mm DC OUTPUT 0.71 [18.13] 0.22 [5.7] PITCH = 7.92mm AC INPUT 3.00 [76.2] 2.57 [65.3] 0.76 [19.27] 0.21 [5.45] 5.00 [127.0] 4.55 [115.6] N L Ø0.16 (Ø4) MOUNTING HOLES x 4 LED NOTES: 1. Unit: inches [mm] 2. Tolerance: ±0.02 [±0.5] 3. Weight: Approximately 14.82oz (420g) 4. Input Connector: Mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal 5. Output Connector: Mates with Molex housing 09-50-3081 and Molex 2478 series crimp terminal or DINKLE#DT-2GN-B01W-04P and DINKLE#ESK750V-04P 6. All dimensions are for reference only G
Wall Industries, Inc. Rev A PSMBU152 SERIES 150W Medical AC/DC Open Frame Power Supplies 11/18/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 3 of 3 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833