PSM500-210 PHIHONG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • SELV Output with 1500VAC Isolation • Diagnostics
  • 500 Watts X 3 in 1U 19” Rack • Full Protection OTP, OCP, OVP
  • Hot Plug N+1 • 85-265VAC with Active PFC

Applications

  • Power Over Ethernet • Network Redundant Power Source
  • Telecommunications • Servers Safety Approvals
  • cUL/UL • TUV
  • CE Mechanical Characteristics
  • Length: 300mm (11.81in) • Height: 41mm (1.61in)
  • Width: 107mm (4.21in) • Weight: 1.81kg (4lb.) Output Specifications Note: (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. Model DC Output Load Ripple (1) Regulation Voltage Min. Max. P-P (max) Line Load 50V (main) 0A 10A 1% ±0.5V PSM500-210 12V (stand by) 0A 1.5A 56V (main) 0A 9A 1% ±0.5V PSM500-216 12V (stand by) 0A 1.5A

PSM500-210, -216 Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Range 85 to 264VAC AC Input Current 6A(RMS) max. for 115VAC 3A(RMS) max. for 230VAC AC Input Line Fuse 10A / 250V Leakage Current 3.5mA max. @ 254VAC 60Hz AC Input Frequency 47-63Hz AC Inrush Current 30A(RMS) max. for 115VAC 60A(RMS) max. for 230VAC OUTPUT: Efficiency 83% typical at max. load (115VAC) 85% typical. at max. load (230VAC) Hold-up Time 10mS min. 120VAC and max. load Over Voltage Protection OV set at 57~60V – latching. Over Current Protection Protection against short circuit. Isc max 110%-140% full load current. The 50V, 56V can operate in current mode till shot circuit and can be shorted permanently without damage. ENVIRONMENTAL: Temperature Operation 0 to +50°C Non-operation -30 to +70°C Humidity Operation 8 to 90% EMC FCC Class B EN55022 conducted Class B *with external filter (*measured with Y capacitors 0.01uf/400Vat main output connector terminal from ± V to unit chassis) EN55022 conducted Class B; radiated Class A (using 3 x PSM500-210,or -216 in rack “PSA1554-605”) Isolation Test Primary to Secondary: 4242VDC Primary to Ground: 2121VDC Secondary to Ground: 2121VDC Immunity EN50082-1 ESD: EN61000-4-2. Level 3 EFT: EN61000-4-4. Level 2 Surge: EN61000-4-5. Level 3 CS: EN61000-4-6. Level 3 Voltage Dips EN61000-4-11 RS: EN61000-4-3. Level 3 Harmonic: EN61000-3-2 FEATURE: Front Panel LED DC Good, Fault condition 50V Enable/Disable Non latching – remote on/off pin Thermal Shutdown Latching Fan Fail Latching Load Sharing 10% at full load Isolated Diode Internal Oring Diode located on main (-) output section. Output Connector Molex p/n 15060141 or equivalent Molex p/n 15249144 or equivalent (mating)

Dimension Diagram Unit: mm (inch)