DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

 SELV Output with 1500VAC Isolation  Diagnostic LEDs  1100W x 3 in 1U 19” Rack  Full Protection OTP, OCP, OVP  Hot Plug N+1

Applications

 Power over Ethernet  Network Redundant Power Source  Telecommunications  Servers Safety Approvals  cUL/UL  CE Mechanical Characteristics  Length: 300mm (11.81in)  Height: 41mm (1.61in)  Width: 107mm (4.21in)  Weight: 2Kg (4lb) Output Specifications *Please refer to second page for more specific output power information Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Model DC Output Voltage Min. Load Max. Load Max Power ≤100VAC IN ≥115VAC IN PSM1000-216 56V (Main) 0A 17.8A 19.65A 1100W*12V (Stand-by) 0A 0.5A

PSM1000-216 Characteristics WWW.PHIHONG.COM Input: AC Input Voltage Range 90 to 264V AC AC Input Frequency 47 to 63Hz Input Current 15A (RMS) max low line 7.5A (RMS) max high line AC Input Line Fuse 20A/250V Leakage Current 3.5mA maximum at 264V AC, 50Hz Inrush Current 35A maximum at 115VAC 70A maximum at 230VAC Hold-up Time 10mS minimum at max load with output dropping to 50V Output: Output Power 1100W for AC Input 115VAC to 264VAC 1000W for AC Input 100VAC or less Efficiency ≥85% (typical) at 115VAC or greater Output Ripple and Noise 56V=1% pk-pk at ambient 25°C 12V=2% pk-pk at ambient 25°C Over-Voltage Protection Latching, OV set at 60V±5% Thermal Shutdown Non latching Over-Current/Short-Circuit Protection Latching with timer; the 56V output can operate in current mode till short circuit. Output latches within 2-4 seconds if overload or short circuit. The condition will not be removed. 56V Enable/Disable Non-latching –remote on/off pin, short to output return to enable Fan Fail Latching Environmental: Temperature Operation (Standalone) 0 to 50°C Operation (In Rack) 0 to 40°C Non-operation -30 to +70°C Emissions FCC Class A EN55022 Class A Immunity ESD: EN61000-4-2 Level 4 RS: EN61000-4-3 Level 3 EFT: EN61000-4-4 Level 3 Surge: EN61000-4-5 Level 4 CS: EN61000-4-6 Level 3 Voltage Dips: EN61000-4-11 Harmonic: EN61000-3-2 Insulation Resistance Input to Output: 7M ohm 500VDC Dielectric Withstand (Hi-pot) Test Primary to Secondary: 4242VDC for 1 minute Primary to Chassis: 2121VDC for 1 minute Secondary to Chassis: 2121VDC for 1 minute Indicators (Front Panel) DC Good LED – Green Fault LED – Red (Fan Fail, Thermal Shutdown, Over Load, Short Circuit) AC Input Connector IEC320 3-Pin located on the front of the module DC Output Connector FCI p/n 51761-10001604AA or Equivalent Mate FCI p/n 51731-29 or Equivalent Pin Out +56V main +P1, P2; -56V main = P3, P4; Enable – A4; CS_BUS = D4; +12Vsb =C1, D1; -12Vsb +A1, B1

Dimension Diagram Unit: mm (inch) WWW.PHIHONG.COM