DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 04/27/2010 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 7 DATASHEET Rev. A PSM360 SERIES 90~264VAC Input Voltage Range

360 Watts with 30CFM Forced Airflow

Active PFC, Single Output Medical AC/DC Switching Power Supplies

FEATURES

  • Active PFC
  • Single Output
  • Remote Inhibit Function
  • 5V / 1A Standby Output
  • 12V / 1A Output for Fan
  • 90~264Vac Input Voltage Range
  • 360W with 30CFM Forced Airflow
  • Current Sharing Option (Single Wire)
  • Short Circuit, Over Load, and Over Voltage Protection
  • UL60601-1, CB IEC60601-1, TUV EN60601-1 Safety Approvals
  • 3 Mechanical Options Available: U-Chassis, Enclosed with Rear Side Fan, Enclosed with Top Fan

DESCRIPTION

The PSM360 series of medical AC/DC switching power suppli es offers 360 watts of output power with 30CFM forced airflow. All models have a single output, 90~264VAC fu ll range input, and active PFC. These supplies also have UL60601-1, TUV EN60601-1, CB IEC60601-1, and CE safety approvals . All models are protected against short circuit, over load, and over voltage conditions. Mode ls are available in U-Chassis (Type U), enclosed with rear side built-in fan (Type E), and enclosed with top built-in fan (Type F) designs. This series also has a current sharing option (suffix “D”). Type U Type E Type F

Rev. A PSM360 Series Up to 360 Watts Active PFC, Single Output Medical AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 04/27/2010 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 7 SPECIFICATIONS: PSM360 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 90 ~ 264Vac (Full Range) Input Frequency 47 ~ 63Hz Input Current 4.5A max. at 115Vac Inrush Current < 30A peak at 115Vac cold start and 25°C < 80A peak at 230Vac cold start and 25°C Power Factor > 0.9 at 115Vac/230Vac OUTPUT SPECIFICATIONS Output Current See Table Output Voltage See Table Output Regulation (See Note 3) 5% Output Power 360W max. with 30CFM forced air cooling Ripple & Noise (20MHz BW) (See Note 4) ±1% Hold Up Time 20ms typical at 115Vac input Temperature coefficient ±0.04%/°C PROTECTION Short Circuit Protection Auto-recovery Over Voltage Protection 110% to 130% above nominal output. Latching type, AC recycle Over Load Protection 110% to 150% maximum rating. Auto-recovery GENERAL SPECIFICATIONS Efficiency 83% typical at 115Vac and full load 86% typical at 230Vac and full load Isolation Voltage Input to Output: 5656Vdc Input to Ground: 2121Vdc Output to Ground: 707Vdc Leakage Current < 300µA at 264Vac Current Share Option (See Note 1) Single wire (add the suffix “D” to the part number) ENVIRONMENTAL SPECIFICATIONS Operating Temperature 0°C to +50°C ambient; each output derates at 2.5% per degree from +50°C to +70°C Humidity (non-condensing) 5% to 95% MTBF >100,000 hours at full load and 25°C ambient temperature PHYSICAL SPECIFICATIONS Dimensions (L x W x H) Weight U Type: 40oz (1134g) E Type: 52.8oz (1497g) F Type: 52.8oz (1497g) SAFETY & EMI Safety Standards UL 60601-1, CSA-C22.2 NO.601.1-M90, TUV EN60601-1, CB IEC60601-1 EMI Standards EN60601-1-2, FCC Part 18 Class B, EN55011 Class B, CE

Rev. A PSM360 Series Up to 360 Watts Active PFC, Single Output Medical AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 04/27/2010 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 7 MODEL SELECTION TABLE Model (1) Input Voltage Output Voltage Output Current (30CFM forced air) Maximum Output Power (2) (30CFM forced air) PSM360B-1Y12-X (D) 90 ~ 264 VAC 12 VDC 30A 360W PSM360B-1Y24-X (D) 90 ~ 264 VAC 24 VDC 15A 360W PSM360B-1Y30-X (D) 90 ~ 264 VAC 30 VDC 12A 360W PSM360B-1Y36-X (D) 90 ~ 264 VAC 36 VDC 10A 360W PSM360B-1Y48-X (D) 90 ~ 264 VAC 48 VDC 7.5A 360W PSM360B-1Y54-X (D) 90 ~ 264 VAC 54 VDC 6.67A 360W PSM360B-1Y57-X (D) 90 ~ 264 VAC 57 VDC 6.32A 360W NOTES 1. Mechanical Options: The “x” in the part number can be “U” for U-chassis type, “E” for enclosed type with rear side built-in fan, or “ F” for enclosed type with top side built-in fan. The “D” is for current sharing option. 2. U Type: 360W max. with 30CFM forced air at +50°C ambient temperature. E Type: 360W max. at +50°C ambient temperature. F Type: 360W max. at +50°C ambient temperature. 3. At 25°C including initial tolerance, line voltage, load currents, and output voltages adjusted to factory settings. 4. Ripple & Noise is measured at 20MHz bandwidth with a tantalum 10µF in parallel with a 0.1µF ceramic capacitor.

Rev. A PSM360 Series Up to 360 Watts Active PFC, Single Output Medical AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 04/27/2010 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 7 MECHANICAL DRAWINGS Type “U” Models (U-Chassis Type): 8.00 x 4.66 x 1.51 inches Unit: inches (mm) AC(N) AC(L) FG N.C. RTN RTN RTN FAN1 CN5 CN4 FAN2 CN2 CN3 CN1 CN1 CN4 POWER GOOD GND GND FAN FAULT FAN FULL SPEED CN7 P2.54-2*3P Molex P/N:90122-0123 or Equivalent Recommended direction for forced airflow 8A/250V AC(N) AC(L) FG 0.47 (12.0) REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE WARNING!! 0.75 (19.0) 7.30 (185.4)0.35 (8.9) 0.35 (8.9) 2-M3P0.5 0.75 (19.0) 0.75 (19.0) 0.35 (8.9) 0.35 (8.9) 4-M3P0.5 0.50 (12.7) 0.50 (12.7) 0.50 (12.7) 0.50 (12.7)3.66 (93.1) 0.35 (8.9) 0.35 (8.9) 7.30 (185.4) 1.05 (26.75) 0.32 (8.25) 0.32 (8.25) 2.35 (59.75)

Rev. A PSM360 Series Up to 360 Watts Active PFC, Single Output Medical AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 04/27/2010 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 7 Type “E” Models (Enclosed with Rear Side Built-in Fan Type): 9.03 x 4.66 x 1.63 inches Unit: inches (mm) AC(N) AC(L) FG N.C. RTN RTN RTN CN1 CN4 POWER GOOD GND GND FAN FAULT FAN FULL SPEED CN4 CN1 CN7 P2.54-2*3P Molex P/N:90122-0123 or Equivalent FAN1 CN5 CN3CN2 NLGF RTN RTN RTN +V +V +V NC 8A/250V 7.30 (185.4) 0.35 (8.9) 0.35 (8.9) 4-M3P0.5 0.5 (12.7) 0.5 (12.7)3.66 (93.1) 0.32 (8.25) 2.35 (59.75) 0.32 (8.25) 1.05 (26.75) 2-M3P0.5 7.30 (185.4)0.35 (8.9) 0.35 (8.9) 0.77 (19.5) 0.77 (19.5) 1.63 (41.5) 4.66 (118.5) 0.47 (12.0) 9.03 (229.4) 0.75 (19.0)

Rev. A PSM360 Series Up to 360 Watts Active PFC, Single Output Medical AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 04/27/2010 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 6 of 7 Type “F” Models (Enclosed with Top Side Built-in Fan Type): 8.00 x 4.66 x 2.85 inches Unit: inches (mm) AC(N) AC(L) FG N.C. RTN RTN RTN FAN1 CN5 CN4 CN1 CN4 POWER GOOD GND GND FAN FAULT FAN FULL SPEED CN7 P2.54-2*3P Molex P/N:90122-0123 or Equivalent CN3 CN2 1 CN1 NLGF 8A/250V 0.47 (12.0) 4.67 (118.5) RTN RTN RTN +V +V +V NC 0.75 (19.0) 8.00 (203.2) 2-M3P0.5 0.35 (8.9) 0.75 (19.0) 0.35 (8.9) 0.75 (19.0) 7.30 (185.4) 0.35 (8.9) 0.35 (8.9) 0.35 (8.9) 0.35 (8.9) 4-M3P0.5 7.30 (185.4) 0.5 (12.7) 0.5 (12.7)3.67 (93.1) 0.5 (12.7) 0.5 (12.7) 0.32 (8.25) 1.05 (26.75) 0.32 (8.25) 2.35 (59.75)

Rev. A PSM360 Series Up to 360 Watts Active PFC, Single Output Medical AC/DC Switching Power Supply Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 04/27/2010 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 7 of 7 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)587-9255 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 5 Watson Brook Rd. Exeter, NH 03833