PSM WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSM Series Open Frame 40~65 Watts Single Output AC/DC Medical Power Supply

FEATURES

  • Open Frame
  • Single Output
  • Universal AC Input: 90~264VAC
  • Output Voltages from 5 to 52VDC
  • Over Voltage/ Over Load/ Short Circuit Protected
  • 4(L) x 2(W) x 1.18(H) inches (101.6 x 50.8 x 30 mm) SPECIFICATIONS: PSM Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage 90 – 264VAC Input Frequency 47 to 63Hz Input Current 2A(rms) @ 115VAC Inrush Current < 40A @ 115VAC at 25°C cold start, < 80A @ 230VAC at 25°C cold start OUTPUT SPECIFICATIONS Output Voltage See Table Output Power Range 65 Watts max with convection cooling. Output Regulation See table Output Current See Table Ripple & Noise (20MHz BW) 1% Hold-Up Time 10ms at max watt load and 115VAC nominal line. Temperature Coefficient All outputs ±0.04%/°C max. PROTECTION Short Circuit Protection Auto recover Over Voltage Protection Output 110% to 130% above following nominal output. Latching Type. AC recycle. Over Load Protection Over load protected @ 120% to 180% above following maximum rating. Auto recover. GENERAL SPECIFICATIONS Efficiency 80% typical at full output ENVIRONMENTAL SPECIFICATIONS Operating Temperature 0°C to +50°C ambient, each output derates at 2.5% per degree from +50°C to 70°C. Humidity (non-condensing) 20% to 90% Cooling Free air convection MTBF 100,000 hrs at full load and 25°C ambient. PHYSICAL SPECIFICATIONS Weight 7oz Dimensions 4(L) x 2(W) x 1.18(H) inches SAFETY & EMC Safety Standards UL/cUL UL60601-1, TUV EN60601-1, CB IEC 60601-1 EMC Standards EN60601-1-2, FCC Part 18 Class B, EN55011 Class B, CE

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSM Series Open Frame 40~65 Watts Single Output AC/DC Medical Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Output Voltage Range Preset Voltage Max. Output Current (convection cooling) Output Power Output Regulation Ripple & Noise PSM040B-1Y050 5 - 7VDC 5VDC 8A 40W 5% 50mVp-p PSM060B-1Y120 11-13VDC 12VDC 5A 60W 3% 120mVp-p PSM060B-1Y150 14-17VDC 15VDC 4A 60W 3% 150mVp-p PSM065B-1Y190 18-21VDC 19VDC 3.43A 65W 3% 190mVp-p PSM065B-1Y240 22-26VDC 24VDC 2.71A 65W 3% 240mVp-p PSM065B-1Y360 33-39VDC 36VDC 1.81A 65W 2% 360mVp-p PSM065B-1Y480 44-52VDC 48VDC 1.36A 65W 2% 480mVp-p NOTES 1. At 25°C including initial tolerance, line voltage, load currents, and output voltages adjusted to factory settings. 2. Ripple and Noise: Peak-to-peak with 20mHz bandwidth with a tantalum 10uF capacitor in parallel with a 0.1uF ceramic capacitor. 3. Other DC outputs available for 40W (5 to 7V), 60W (11 to 13V and 14 to 17V), 65W (18 to 21V, 22 to 26V, 33 to 39V, and 44 to 52V), set at factory. To determine part numbers for output voltages not listed see the “Part Number Guide” table below. 4. All output ranges are covered in agency certification and the preset voltage will be set as standard models. If any request is not standard output, please contact us prior to ordering. Part Number Guide PSM040B-1YW (5-7V) PSM060B-1YX (11-13V) PSM060B-1YX (14-17V) PSM065B-1YZ (18-21V) PSM065B-1YZ (22-26V) PSM065B-1YZ (33-39V) PSM065B-1YZ (44-52V) MECHANICAL DRAWING W= 050-070 X = 110-170 Z = 180-520 Ex: For a 6V output the part number would be PSM040B-1Y060 For a 12.2V output the part number would be PSM060B-1Y122 For a 33.4V output the part number would be PSM065B-1Y334 MATCHING CONNECTORS CN1 = AC INPUT MOLEX P/N: 09-65-2029 (OR EQUIVALENT) FEMALE HOUSING MOLEX P/N: 09-76-1020 (OR EQUIVALENT) CN2 = DC OUTPUT MOLEX P/N: 09-65-2048 (OR EQUIVALENT) FEMALE HOUSING MOLEX P/N: 09-52-4044 (OR EQUIVALENT)