PSM04A-050 PHIHONG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- No Load Power Consumption < 0.5 Watt • Low Leakage Current
- Flip Plug Design • Low Cost
- EISA Compliant*
Applications
- Wireless Communications • Portable Equipment
- Peripherals • PDA Safety Approvals
- cUL/UL Mechanical Characteristics
- Length: 69.4mm (2.73in) • Height: 25mm (0.98in)
- Width: 48mm (1.89in) • Weight: 145g (5.12oz) Output Specifications DC Output Load Ripple (1) Regulation Efficiency Model Voltage Min. Max. P-P (max) Line Load Level PSM04A-050(STD) 5V 0A 0.75A 55mV ±5% Note: (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20Mhz. *EISA Compliant Level IV115VAC Phihong is not responsible for any errors or changes. Content is subject to change without notice. Please consult the factory and visit www.phihong.com for the most up-to-date specifications.
PSM04A Characteristics WWW.PHIHONG.COM INPUT: Short Circuit Protection AC Input Voltage Rating 100 to 240VAC Protection against short circuit for output: the load current delivered into a short circuit shall not exceed 2A. AC Input Voltage Range 90 to 264VAC ENVIRONMENTAL: Temperature AC Input Current Operation 0 to +45°C Non-operation -40 to +85°C 0.2A(RMS) Max. Leakage Current Humidity 250uA Max. Operation 10 to 90% AC Input Frequency Emissions 47-63Hz FCC Part 15 Class B CISPR 22 Class B Input Power Saving 0.5W Max. Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000VAC OUTPUT: Efficiency DC Output Connector 50% Min. 2.1x5.5mm Center Positive Standard Mating Connector Hold-up Time Kycon KLD-0202-A or equivalent 10mS Min. @ 120VAC and Max. load Over Voltage Protection 7.5V Max. Dimension Diagram Unit: mm (inch)