DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 6 Standard Pins 90 Degree Bent Pins (-F Suffix)

FEATURES

  • Wide Input Voltage Range: 85~264VAC/100~400VDC
  • Ultra-Slim SIP Package with Optional 90º Bend
  • Industrial Grade
  • Isolation of 3000VAC
  • Compact Size
  • Over Voltage, Over Current and Short Circuit Protection
  • RoHS Compliant
  • IEC60950, UL60950, and EN60950 Safety Approvals

DESCRIPTION

The PSLS05 series of AC/DC converters offers up to 5 watts of output power in an ultra slim SIP package. This series consists of single output models with a wide input voltage range of 85~264VAC/100~400VDC. Each model in this series is industrial grade, has isolation of 3000VAC, and is RoHS compliant. This series also has IEC60950, UL60905, and EN60950 safety approvals and is MODEL SELECTION TABLE Model Number(1) Input Voltage Range Output Voltage Output Current Maximum Capacitive Load Efficiency Output Power PSLS05-15B03SS 85-264VAC (100-400VDC) 3.3V 1A 2200µF 67% 3.3W PSLS05-15B05SS 5V 1A 1500µF 74% PSLS05-15B09SS 9V 0.56A 680µF 75% PSLS05-15B12SS 12V 0.42A 470µF 76% PSLS05-15B15SS 15V 0.34A 330µF 77% PSLS05-15B24SS 24V 0.21A 100µF 79% SPECIFICATIONS All specifications are based on 25°C, Humidity <75%, Nominal Input Voltage, and Rated Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Range Conventional 100 240 VAC AC Input 85 264 DC Input 100 400 VDC Input Frequency 47 63 Hz Input Current 115VAC 0.2 A 230VAC 0.1 Inrush Current 115VAC 5 A 230VAC 10 Leakage Current CY0 is 1nF/400VAC 0.25 mA OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Accuracy 3.3V Model ±2 ±3 % All Other Models ±1 ±2 Line Regulation Full Load ±0.1 ±0.5 % Load Regulation 10%-100% Load ±1 ±1.5 % Output Power See Table Output Current See Table Maximum Capacitive Load See Table Ripple & Noise 20MHz bandwidth (peak-peak value) 50 150 mV Temperature Drift Coefficient ±0.02 %/ºC Stand-By Power Consumption 0.5 W Min Load 0 % Hold Up Time 115VAC Input 20 mS 230VAC Input 80 PROTECTION Short Circuit Protection Continuous, Self-Recovery Over Current Protection ≥110%Io, Self-Recovery Over Voltage Protection Zener Clamp Diode

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 6 SPECIFICATIONS All specifications are based on 25°C, Humidity <75%, Nominal Input Voltage, and Rated Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit ENVIRONMENTAL SPECIFICATIONS Operating Temperature -25 +85 ºC Storage Temperature -40 +105 ºC Storage Humidity 85 %RH Welding Temperature Wave-Soldering 260±5ºC; time: 5~10s Manual-Welding 360±10ºC; time:3~5s Power Derating -25ºC~0ºC 0.8 %/ºC +55ºC~+85ºC 1.33 MTBF MIL-HDBK-217F @25ºC 300,000 Hours GENERAL SPECIFICATIONS Efficiency 230VAC, % typ. See Table Switching Frequency 100 kHz Isolation Voltage Input to Output (Test Time: 1min (leakage current setting value: 5mA) 3000 VAC PHYSICAL SPECIFICATIONS Weight 0.25oz (7g) Dimensions (L x W x H) Standard Pins 1.65in x 0.73in x 0.54in (42mm x 18.50mm x 13.65mm) -F Suffix 1.65in x 0.79in x 0.55in (42mm x 20mm x 14mm) Cooling Free Air Convection SAFETY CHARACTERISTICS Safety Approvals & Regulated Certification IEC60950 EN60950 UL60950 Certifications Standard Pin Models Only UL, CE, CB Safety Class Class II EMI CE CISPR22/EN55022(2) CISPR22/EN55022(3) Class A Class B RE CISPR22/EN55022(2) (3) Class B ESD IEC/EN61000-4-2 Contact ±4kV Perf. Criteria B RS IEC/EN61000-4-3 10V/m Perf. Criteria A EFT IEC/EN61000-4-4 ±2kV(2) Perf. Criteria B IEC/EN61000-4-4 ±4kV(3) Perf. Criteria B Surge IEC/EN61000-4-5 Line to Line ±1kV(2) Perf. Criteria B IEC/EN61000-4-5 Line to Line ±1kV/line to ground ±2KV (3) Perf. Criteria B CS IEC/EN61000-4-6 3Vr.m.s.(3) Perf. Criteria A PFM IEC/EN61000-4-8 10A/m Perf. Criteria A Voltage Dips, Short Interruptions, Voltage Variations Immunity IEC/EN61000-4-11 0%-70% Perf. Criteria B NOTES 1. Add -F to model name to indicate 90º bent pin model. 2. See Fig. 1 for recommended circuit. 3. See Fig. 2 for recommended circuit 4. Module required dispensing fixed after assembled. 5. This part is open frame, at least 6.4mm safety distance between the primary and secondary external components of the module is needed to meet the safety requirements. 6. Customization is available. *Due to advances in technology, specifications subject to change without notice.

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 3 of 6 CHARACTERISTIC CURVES Temperature Derating Graph Input Voltage Derating Graph Note: 1. Input voltage should be derated based on temperature derating when it is 85~110VAC/240~264VAC/100-130VDC/340-400VDC 2. This product is suitable for use in natural cooling environments. If in closed environment, please contact factory. PSLS05-15BXXSS AC Input Efficiency Vs Input Voltage (Full Load) PSLS05-15B12SS AC Input Efficiency Vs Output Load PSLS05-15BXXSS DC Input Efficiency Vs Input Voltage (Full Load) PSLS05-15B12SS DC Input Efficiency Vs Output Load

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 4 of 6 MECHANICAL DRAWINGS Pin Out Pin Function

1 AC(N)

3 AC(L)

5 +V(cap) 7 -V(cap) 12 -Vo 14 +Vo 1. It is necessary to add C1 between pin 5 and pin 7. 2. It is necessary to add circuit to the output, such as the typical application of Fig. 1. 3. It is necessary to have distance ≥6.4mm for safety between external components in primary circuit and secondary circuit. 90º Bent Pin Models (-F Suffix) Note: Grid 2.54*2.54mm Pin Out Pin Function 5 +V(cap) 7 -V(cap) 12 -Vo 14 +Vo

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 5 of 6 DESIGN REFERENCE Typical Application Circuit Model C1 (Required) (Required) R1 C3 CX1 CY0 NTC MOV FUSE (Required) TVS PSLS05-15B03SS 10µF/400V 220µF/35V 12Ω/ 100nF/ 50V 0.1µF/ 275VAC 1nF/ 400VAC 13D-5 S14K350 1A/250V SMBJ7.0A PSLS05-15B05SS PSLS05-15B09SS SMBJ12A PSLS05-15B12SS 150µF SMBJ20A PSLS05-15B15SS PSLS05-15B24SS SMBJ30 Note: 1. C1: When AC input, C1 is used as filter capacitor, the value of C1 is recommended to be 10µF/400V. When DC input, C1 is used as EMC filter capacitor, the value of C1 is recommended to be 10µF/400C (when the input is above 370VDC, the recommended value of C1 is 10µF/450V) 2. Output filtering capacitor C2 is electrolytic capacitor, C2 is recommended to apply electrolytic capacitor with high frequency and low resistance. For capacitance and current of capacitor please refer to datasheet. Capacitance withstands voltage derating 80% or above. C3 is ceramic capacitor, which is used to filter high-frequency noise. EMC Solution-Recommended Circuit Components Recommend Parameters MOV2 S14K320 CY1, CY2 1nF/400VAC CX 0.1µF/275VAC LCM 3.5mH LDM 330µH NTC 13D-5 FUSE 1A/250V, slow fusing, required Note: Recommended value of other components refers to typical application circuit

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 6 of 6 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on- time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833