PSIUU100 WALL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Wall Industries, Inc. Rev A PSIUU100 SERIES Up to 100 Watts, AC/DC Switching Power Supplies 02/25/2014 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603T778T2300 • Toll Free: 888T597T9255 • Fax 603T778T9797 website: www.wallindustries.com • eTmail: sales@wallindustries.com Page 1 of 3
FEATURES
- Class I
- RoHS Compliant
- Internal EMI Filter
- Up to 100 Watts Output Power
- Active Power Factor Correction
- Over Voltage Protection (Crowbar Design)
- Over Current Protection
- Wide Input Voltage Range: 90~260VAC
- T20°C to +70°C Operating Temperature Range
- Single Outputs Ranging from 3VDC to 50VDC
- 3TPin Input Connector
- 2TPin Input Connector Available (See PSIUU101 Series)
- UL/cUL(UL 60950T1: 2nd Ed.) & TUV/GS (EN 60950T1: 2nd Ed.) Safety Approvals
- Meets FCC PartT15 Class B and CISPRT22 Class B Emission Limits
- 100% BurnTin Tested
DESCRIPTION
Size: Weight: 5.00 x 3.21 x 1.44 inches 1.05 lbs (475g) 127.0 x 81.6 x 36.6 mm The PSIUU100 series of Class I AC/DC switching mode power supplies provides up to 100 Watts of continuous output power in a 5.00” x 3.21” x 1.44” UTchassis package. This series has single output models ranging from 3VDC to 50VDC with a wide input voltage range of 90~260VAC. These power supplies have an internal EMI filter, active power factor correction, and over voltage and over current protection. This series also has UL/cUL (UL 60950T1: 2nd edition) and TUV/GS (EN 60950T1: 2nd edition) safety approvals and meets FCC PartT15 Class B and CISPRT22 Class B Emission limits. These units are well suited for use in industrial equipment as well as many other applications. All models are 100% burnTin tested. MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Total Regulation Output Power NoTLoad Power Consumption PSIUU100T101 3 ~ 5 VDC 18.00 ~ 10.80 A 5% 54W 6W PSIUU100T102 5 ~ 6 VDC 14.00 ~ 11.66 A 5% 70W 6W PSIUU100T103 6 ~ 9 VDC 13.33 ~ 8.88 A 5% 80W 6W PSIUU100T104 9 ~ 11 VDC 11.11 ~ 9.09 A 5% 100W 6W PSIUU100T105 11 ~ 13 VDC 9.09 ~ 7.69 A 3% 100W 6W PSIUU100T106 13 ~ 16 VDC 7.69 ~ 6.25 A 3% 100W 6W PSIUU100T107 16 ~ 21 VDC 6.25 ~ 4.76 A 3% 100W 6W PSIUU100T108 21 ~ 27 VDC 4.76 ~ 3.70 A 2% 100W 6W PSIUU100T109 27 ~ 33 VDC 3.70 ~ 3.03 A 2% 100W 6W PSIUU100T110 33 ~ 40 VDC 3.03 ~ 2.50 A 2% 100W 6W PSIUU100T111 90 ~ 260 VAC 40 ~ 50 VDC 2.50 ~ 2.00 A 2% 100W 6W DERATING Notes 1. Operating Temperature: T20°C to + 70°C 2. Derating linearly from 100% load at 50°C to 50% load at 70°C -20 0 20 40 60 70 80 120 100 Output Power (%) Ambient Temperature (°C)
Wall Industries, Inc. Rev A PSIUU100 SERIES Up to 100 Watts, AC/DC Switching Power Supplies 02/25/2014 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603T778T2300 • Toll Free: 888T597T9255 • Fax 603T778T9797 website: www.wallindustries.com • eTmail: sales@wallindustries.com Page 2 of 3 TECHNICAL SPECIFICATIONS: PSIUU100 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Operating Input Voltage Range 90 260 Input Voltage Safety Approvals Input Voltage Range 100 240 VAC Input Frequency 47 63 Hz Vin = 100VAC, Io = full load 2.0 Input Current Vin = 240VAC, Io = full load 2.0 A Vin = 115VAC, Io = full load, 25°C, cold start 50 Inrush Current Vin = 230VAC, Io = full load, 25°C, cold start 100 A No Load Power Consumption Vin = 230VAC, Io = no loa d 6 W Power Factor Correction Vin = 240VAC, Io = full load 0.95 1 OUTPUT SPECIFICATIONS Output Voltage See Table Line Regulation LL to HL, full load 0.5 1 % Load Regulation Vin = 230VAC or 325VDC 2 5 % Output Power See Table Output Current See Table Outputs under 3.3VDC 2 Ripple & Noise (peak to peak) Vin = 90VAC, Io = full load Others 1 % HoldTup Time Vin = 110VAC, Io = full load 16 ms StartTup Time Vin = 100VAC, Io = full load 3 s Transient Response Time Vin = 100VAC, Io = Full loa d to half load 4 ms Temperature Coefficient 0~50°C T0.04 +0.04 %/°C PROTECTION Over Voltage Protection 112 132 % Over Current Protection 110 150 % GENERAL SPECIFICATIONS Efficiency Vin = 230VAC, Io = full load 70 85 % Primary to Secondary 4242 Dielectric Withstanding Voltage Primary to PE 2594 VDC Isolation Resistance Test Voltage = 500VDC 50 MΩ Leakage Current Vin = 240VAC/60Hz 0.75 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derating linearly from 100% Load at 50°C to 50% load at 70°C T20 +70 °C Storage Temperature T40 +85 °C Operating Humidity 0 95 % Storage Humidity 0 95 % Cooling Free air convection MTBF MILTHDBKT217F, 25°C 100,000 hours PHYSICAL SPECIFICATIONS Weight 1.05 lbs (475g) Input Connector Mates with Molex housing 09T52T4054 and Molex 2478 crimp terminal Output Connector Mates with Molex housing 09T52T4134 and Molex 2478 crimp terminal SAFETY Safety Approvals UL/cUL (UL 60950T1: 2nd edition); TUV/GS (EN 60950T1: 2nd edition) EMI Requirements for CISPRT22 220VAC B Class EMI Requirements for FCC PARTT15 110VAC B Class
Wall Industries, Inc. Rev A PSIUU100 SERIES Up to 100 Watts, AC/DC Switching Power Supplies 02/25/2014 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603T778T2300 • Toll Free: 888T597T9255 • Fax 603T778T9797 website: www.wallindustries.com • eTmail: sales@wallindustries.com Page 3 of 3 MECHANICAL DRAWING 1.18±0.02 [30.0±0.5] 1.18±0.08 [30.0±2.0] #6-32 (MOUTING HOLES)X3 #6-32 (MOUTING HOLES)X6 AC INPUT PITCH=0.31 [7.92] 1.44±0.08 [36.6±2.0] PITCH=0.16 [3.96] 0.66±0.02 [16.8±0.5] #6-32 (MOUTING HOLES)X2 L N G LED DC OUTPUT 13 1 PIN CONNECTIONS PIN DESIGNATION
1 OUT
2 OUT
3 OUT
4 OUT
5 OUT
6 OUT
7 RTN
8 RTN
9 RTN
10 RTN
11 RTN
12 RTN
13 N/C
- Unit: Inches [mm] 2. Weight: 1.05 lbs (475g) 3. Input connector mates with Molex housing 09T52T4054 and Molex 2478 series crimp terminal 4. Output connector mates with Molex housing 09T52T4134 and Molex 2478 series crimp terminal 5. 2Tpin input connector also available (See PSIUU101 Series) 6. All dimensions are for reference only COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our inThouse research and development engineers will provide a solution that exceeds your performance requirements onTtime and on budget. Our ISO9001T2008 certification is just one example of our commitment to producing a high quality, wellTdocumented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778T2300 Toll Free: /telephonesolid(888)597T9255 Fax: /telephonesolid(603)778T9797 ETmail: sales@wallindustries.com Web: www.wallindustries.com Address: 5 Watson Brook Road Exeter, NH 03833