PSIM65 WALL | Alldatasheet

Document overview

  • Manufacturer or author: dhoutz
  • PDF pages: 3

Technical content

Wall Industries, Inc. Rev A PSIM65 SERIES 40~65 Watts, Medical AC/DC Power Supplies 06/26/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 1 of 3

FEATURES

  • RoHS Compliant
  • High Power Density
  • 2” x 3” Open Frame Footprint
  • 90~264 VAC Input Voltage Range
  • 87% High Efficiency
  • Up to 65 Watts Output Power
  • Single Outputs Ranging from 5VDC to 56VDC
  • :20°C to +70°C Operating Temperature Range
  • No load Power Consumption < 0.2W at 230VAC
  • Over Voltage, Over Load, and Short Circuit Protection
  • Ultra Low Leakage Current < 189µA at 264VAC
  • Both Medical 60601:1 3rd Ed. MOPP & ITE 60950:1 Approvals

DESCRIPTION

Size: Weight: 3.00 x 2.00 x 1.13 inches 4.23oz (120g) 76.2 x 50.8 x 28.7 mm The PSIM65 series of AC/DC medical power supplies provides up to 65 Watts of output power in a compact 2 x 3 inch open frame package. This series consists of single output models ranging from 5VDC to 56VDC with a 90~264VAC input voltage range. These supplies also feature a low leakage current of less than 189 μA at 264VAC, no load power consumption less than 0.2W, and 87% typical efficiency. These supplies are also protected against short circuit, over voltage, and over load conditions. The PSIM65 series is RoHS compliant and has both medical 60601:1 3rd edition and ITE 60950:1 safety approvals. MODEL SELECTION TABLE Output Current Output Regulation Model Number Input Voltage Range Output Voltage Min Max. Output Power Ripple & Noise (1) :20°C~0°C 0°C~40°C PSIM040B:1Y05 5 VDC 0A 8A 40W 150mVp:p ±10% ±3% PSIM065B:1Y12 12 VDC 0A 5.416A 65W 240mVp:p ±10% ±3% PSIM065B:1Y15 15 VDC 0A 4.333A 65W 300mVp:p ±10% ±3 % PSIM065B:1Y19 19 VDC 0A 3.421A 65W 300mVp:p ±10% ±3% PSIM065B:1Y20 20 VDC 0A 3.25A 65W 300mVp:p ±10% ±3% PSIM065B:1Y24 24 VDC 0A 2.708A 65W 300mVp:p ±10% ±3% PSIM065B:1Y28 28 VDC 0A 2.321A 65W 300mVp:p ±10% ±3 % PSIM065B:1Y48 48 VDC 0A 1.354A 65W 300mVp:p ±10% ±3% PSIM065B:1Y56 90 : 264 VAC 56 VDC 0A 1.161A 65W 300mVp:p ±10% ±3% NOTES 1. Ripple & noise is measured at 20MHz limited bandwidth and with a 100µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel across the output DERATING CURVES 100 120 -20 0 10 20 30 40 50 60 70 80 Output Power (%) Ambient Temperature (°C)

Wall Industries, Inc. Rev A PSIM65 SERIES 40~65 Watts, Medical AC/DC Power Supplies 06/26/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 2 of 3 SPECIFICATIONS: PSIM65 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Range 90 264 VAC Input Frequency 47 63 Hz 115VAC and full load 1 Input Current (rms) 230VAC and full load 0.6 A 115VAC, cold start, 25°C 65 Inrush Current 230VAC, cold start, 25°C 130 A OUTPUT SPECIFICATIONS Output Voltage See Table :20°C to 0°C operating temperature :10 +10 Output Regulation 0°C to +40°C operating temperature :3 +3 5VDC output model 40 Output Power Others 65 Output Current See Table Minimum Load 0 % Ripple & Noise (20MHz BW) Measured at 20MHz limited bandwidth and with a 100µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel across the output See Table Hold:up Time 115VAC and 75% load 10 ms PROTECTION Over Voltage Protection Shutdown and latch:off AC recycle Over Load Protection automatic recovery 110 170 % Short Circuit Protection automatic recovery GENERAL SPECIFICATIONS 5V output model 85 Efficiency 115VAC and full load Others 87 ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Derating linearly 2.5 % per °C from 41°C to +70°C :20 +70 °C Storage Temperature Range :20 +85 °C Humidity Non:condensing 0 90 % MTBF Full load and 25°C ambient temperature 100,000 hours PHYSICAL SPECIFICATIONS Weight 4.23oz (120g) Input Connector (CN1) Mates with JST VHR:3N or equi valent JST B3P:VH:B pitch: 7.92mm or equivalent Output Connector (CN2) Mates with JST VHR:4N or equivalent JST B4P:VH:B pitch: 3.96mm or equivalent SAFETY & EMC ITE UL60950:1, CSA:C22.2 NO.950:1, EN60950:1, CB IEC609 50:1 Safety Approvals ITE EN55022 Class B, CISPR22 Class B, FCC Part 15 Class B, CE EMC Standards Medical EN60601:1:2, FCC Part 18 Class B, EN55011 Class B, CE

Wall Industries, Inc. Rev A PSIM65 SERIES 40~65 Watts, Medical AC/DC Power Supplies 06/26/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603:778:2300 • Toll Free: 888:597:9255 • Fax 603:778:9797 website: www.wallindustries.com • e:mail: sales@wallindustries.com Page 3 of 3 MECHANICAL DRAWING 2.63 [66.7] NOTES: 1. Unit: inches [mm] 2. Weight: 4.23oz (120g) 3. Dimensions: 5.00” x 3.00” x 1.13” 4. All dimensions are for reference only CN1: INPUT CONNECTOR Pin No. Signal AC Neutral 2 AC Line JST B3P-VH-B pitch: 7.92mm or equivalent, mates with JST VHR-3N or equivalent CN2: OUTPUT CONNECTOR Pin No. Signal 4 +Vo +Vo JST B4P-VH-B pitch: 3.96mm or equivalent, mates with JST VHR-4N or equivalent -Vo -Vo 3.00 [76.2] CN2 CN1 1.72 [43.8] Ø3.5 Mounting Holes x 4 0.087 [2.2] COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in:house research and development engineers will provide a solution that exceeds your performance requirements on:time and on budget. Our ISO9001:2008 certification is just one example of our commitment to producing a high quality, well:documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778:2300 Toll Free: /telephonesolid(888)597:9255 Fax: /telephonesolid(603)778:9797 E:mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833