PSHI50D12 POWERSEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • NPT IGBT technology
  • low saturation voltage
  • low switching losses
  • square RBSOA, no latch up
  • high short circuit capability
  • positive temperature coefficient for easy parallelling
  • MOS input, voltage controlled
  • ultra fast free wheeling diodes
  • solderable pins for PCB mounting
  • package with copper base plate
  • Isolation voltage 3000 V ∼
  • UL registered, E 148688 Advantages
  • space and weight savings
  • reduced protection circuits
  • package designed for wave soldering
  • High power density
  • Easy to mount with two screws Typical Applications
  • motor control - DC motor armature winding - DC motor excitation winding - synchronous motor excitation winding
  • supply of transformer primary winding - power supplies - welding - X-ray - UPS - battery charger Short Circuit SOA Capability Square RBSOA PSHI 50D/12*

POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20  2002 POWERSEM reserves the right to change limits, test conditions and dimensions Package style and outline Dimensions in mm (1mm = 0.0394“) Reverse diodes (FRED) Symbol Conditions Maximum Ratings IF25 TC = 25°C 49 A IF80 TC = 80°C 31 A Symbol Conditions Characteristic Values min. typ. max. VF IF = 30 A; TVJ = 25°C 2.4 2.7 V TVJ = 125°C 1.77 V IRM IF = 30 A; diF/dt = 500 A/µs; TVJ = 125°C 27 A trr VR = 600 V; VGE = 0 V 150 ns RthJC 1.3 K/W RthJH with heatsink compound (0.42 K/m.K; 50 µm) 2.6 K/W Module Symbol Conditions Maximum Ratings TVJ -40...+150 °C Tstg -40...+150 °C VISOL IISOL ≤ 1 mA; 50/60 Hz 3000 V~ Md Mounting torque (M4) 1.5 - 2.0 Nm 14 - 18 lb.in. a Max. allowable acceleration 50 m/s 2 Symbol Conditions Characteristic Values min. typ. max. dS Creepage distance on surface (Pin to heatsink) 11.2 mm dA Strike distance in air (Pin to heatsink) 11.2 mm Weight 24 g Temperature Sensor NTC Symbol Conditions Characteristic Values min. typ. max. R25 T = 25°C 455 470 485 k Ω B25/50 3474 K

POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20  2002 POWERSEM reserves the right to change limits, test conditions and dimensions Fig. 1 Typ. output characteristics Fig. 2 Typ. output characteristics Fig. 3 Typ. transfer characteristics Fig. 4 Typ. forward characteristics of free wheeling diode Fig. 5 Typ. turn on gate charge Fig. 6 Typ. turn off characteristics of free wheeling diode 0 200 400 600 800 1000 120 160 200 01234567 04 0 8 0 1 2 0 1 6 0 01234567 VCE V IC VCE A IC V nC QG -di/dt V VGE IRM trr A/µs IRM trr 11V VGE = 17V 15V 13V A 11V A 4 6 8 1 01 21 41 6 V VGE A IC TVJ = 25°CTVJ = 125°C 01234 V VF IF TVJ = 25°CTVJ = 125°C A ns 42T120 42T120 42T120 42T120 42T120 42T120 VGE = 17 V 15 V 13 V TVJ = 25°C VCE = 20V VCE = 600V IC = 25A TVJ = 125°C VR = 600 V IF = 15 A TVJ = 125°C

POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20  2002 POWERSEM reserves the right to change limits, test conditions and dimensions Fig. 7 Typ. turn on energy and switching Fig. 8 Typ. turn off energy and switching times versus collector current times versus collector current Fig. 9 Typ. turn on energy and switching Fig. 10 Typ. turn off energy and switching times versus gate resistor times versus gate resistor Fig. 11 Reverse biased safe operating area Fig. 12 Typ. transient thermal impedance RBSOA 0 2 04 06 0 100 150 02 0 4 0 6 0 200 400 600 0,00001 0,0001 0,001 0,01 0,1 1 10 0,0001 0,001 0,01 0,1 0 2 04 06 08 0 1 0 0 200 400 600 800 0 2 04 06 08 0 1 0 0 120 160 single pulse VCE = 600 V VGE = ±15 V RG = 47 Ω TVJ = 125°C 0 200 400 600 800 1000 1200 1400 VCE = 600V VGE = ±15V RG = 47Ω TVJ = 125°C Eon td(on) tr Eoff td(off) tf Eon td(on) tr Eoff td(off) tf IC A IC A EoffEon t t RG Ω RG Ω VCE t s mJ Eon mJ Eoff ns t ns t ICM K/W ZthJC IGBT diode V A mJ ns nsmJ 42T120 42T120 42T120 42T120 42T120 VCE = 600 V VGE = ±15 V IC = 25 A TVJ = 125°C RG = 47 Ω TVJ = 125°C VCE = 600 V VGE = ±15 V IC = 25 A TVJ = 125°C MDI...50-12P1