PSHF35W-SE-12

PSHF35W WALL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Wall Industries, Inc. Rev B PSHF35W SERIES Up to 36 Watts, AC/DC Switching Power Supplies 07/21/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 3

FEATURES

• RoHS Compliant
• Compact Size
• High Efficiency up to 85%
• Up to 36 Watts Output Power
• ±10% Voltage Adjustment Range
• Over Load & Short Circuit Protection
• Free Air Convection
• 170~264VAC (210~370VDC) Input Voltage Range
• Single Output Voltages Available from 5VDC to 48VDC
• Electrolytic Capacitors all 105°C
• Japanese Brand Components for Key Parts
• GB4943, UL60950, & EN60950 Safety Approvals
• Meets GB9254 & EN55022 Class A EMC Standards
• 100% Full Load Burn-in Tested

DESCRIPTION

Size: Weight: 3.88 x 3.23 x 1.38 inches 8.47oz (240g) 98.5 x 82.0 x 35.0 mm The PSHF35W series of AC/DC switching power supplies offers up to 36 Watts of output power in a 3.88” x 3.23” x 1.38” enclosed case. This series consists of single output models ranging from 5VDC to 48VDC with a 170~264VAC (210~370VDC) input voltage range. Some features include ±10% output adjustability, high efficiency up to 85%, and over load and short circuit protection. The PSHF35W series has GB4943, UL60950, and EN60950 safety approvals and meets GB9254 and EN55022 Class A EMC standards. These supplies are also RoHS compliant and have been 100% full load burn-in tested. TECHNICAL SPECIFICATIONS: PSHF35W SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS AC input voltage range 170 264 VAC Input Voltage DC input voltage range 210 370 VDC Input Frequency 47 63 Hz Input Current 0.6 A Inrush Current 230VAC, cold start 40 A OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Tolerance See Table Voltage Adjustability -10 +10 % Line Regulation LL to HL, full load -0.5 +0.5 % Load Regulation No load to full load -0.5 +0.5 % Output Power See Table Output Current See Table Ripple & Noise (20MHz BW) Measured with 0.1µF ceramic and 47µF electrolytic capacitor in parallel See Table Rise Time Full load 50 ms Hold-up Time Full load 20 ms PROTECTION Over Load Protection Hiccup mode; automatic recover y 105 150 % Short Circuit Protection Hiccup mode; automatic recovery GENERAL SPECIFICATIONS Efficiency See Table Input to Output 1500 Input to FG 1500 Withstand Voltage 1 minute Output to FG 500 VAC Input Leakage Current 230VAC 0.7 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature See derating curve -20 +70 °C Storage Temperature -20 +85 °C Operating Humidity Non-condensing 20 93 % Storage Humidity Non-condensing 20 95 % Cooling Free air convection Vibration At 10~150Hz, 10 min per cycle for 30 minutes each test along the X, Y, & Z axis 2 G MTBF 100,000 hours PHYSICAL SPECIFICATIONS Weight 8.47oz (240g) Connection 5P/8.25mm screw terminal block SAFETY & EMC (See Note 2) Safety Approvals GB4943; UL60950; EN60950 EMC Standards GB9254; EN55022 Class A

Wall Industries, Inc. Rev B PSHF35W SERIES Up to 36 Watts, AC/DC Switching Power Supplies 07/21/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 3 MODEL SELECTION TABLE Model Number (1) Input Voltage Range Output Voltage Output Current Voltage Tolerance Ripple & Noise (2) Output Power Efficiency PSHF35W-SE-5 5 VDC 7.0A ±2% 80mVp-p 35W 77% PSHF35W-SE-12 12 VDC 3.0A ±1% 120mVp-p 36W 81% PSHF35W-SE-15 15 VDC 2.4A ±1% 120mVp-p 36W 82% PSHF35W-SE-24 24 VDC 1.5A ±1% 150mVp-p 36W 83% PSHF35W-SE-48 170~264 VAC (210~370 VDC) 48 VDC 0.7A ±1% 150mVp-p 33.6W 85% NOTES 1. Single output voltages are available from 5~48VDC. If the desired output voltage is not listed in the table please call factory for more ordering options. 2. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel. 3. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. MECHANICAL DRAWING 0.26 [6.5] 0.71 [18.0] Ø0.14 [Ø3.5] 3.43 [87.0] 2.91 [74.0] Ø0.14 [Ø3.5] 0.27 [6.8] 0.69 [17.5] 1.10 [28.0] 1.38 [35.0] 3.48 [88.5] Ø0.14 [Ø3.5] 2.80 [71.0] 2 - M3 2.17 [55.0] Ø0.14 [Ø3.5] 3.23 [82.0] 0.325 [8.25] Unit: inches [mm] 0.81 [20.5] 0.20 [5.0] 1.59 [40.5] LED Vadj 0.20 [5.0] 3.88 [98.5] 0.28 [7.0] Frame NOTICE: Mounting screws into frame max. 3mm PIN CONNECTIONS Pin Assignment

1 AC/L

DC OUTPUT (-V)

5 DC OUTPUT (+V)

Wall Industries, Inc. Rev B PSHF35W SERIES Up to 36 Watts, AC/DC Switching Power Supplies 07/21/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 3 of 3 DERATING CURVE -20 Ambient Temperature (°C) -10 0 10 20 30 40 50 60 70 80 100Load (%) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778-2300 Toll Free: /telephonesolid(888)597-9255 Fax: /telephonesolid(603)778-9797 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833