PSGKF-200 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Wall Industries, Inc. Rev A PSGKF-200 SERIES

200 Watt AC/DC Switching Power Supplies

12/11/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 1 of 4

FEATURES

  • RoHS Compliant
  • 200 Watts Output Power
  • 3000VAC I/O Isolation
  • High Efficiency up to 87.5%
  • Operating Altitude up to 5000M
  • 100% Full Load BurnFin Test
  • BuiltFin Cooling Fan Speed Control
  • BuiltFin Active PFC, PF > 0.95
  • Adjustable Output Voltage
  • Conformal Coating on Both Sides of PCB
  • F25°C to +70°C Wide Operating Temperature Range
  • All Using 105°C Long Life Electrolytic Capacitors
  • Withstand 300VAC Surge Input for 5 Sec.
  • Universal Input Voltage Range: 85F264VAC (120F370VDC)
  • Over Load, Over Power, and Short Circuit Protection
  • 5V, 12V, 24V, and 48VDC Single Output Models
  • UL60950F1 (2nd edition), IEC60950F1:2005 (2nd edition), EN60950F1:2006 Safety Approvals

DESCRIPTION

Size: Weight: 7.83 x 3.90 x 1.97 inches 2.1 lbs (950g) 199.0 x 99.0 x 50.0 mm The PSGKFF200 series of AC/DC switching power supp lies provides 200 Watts of output power in a 7.83” x 3.90” x 1.97” enclosed case with builtFin cooling fan speed control. This series consists of 5V, 12V, 24V, and 48VDC single output models with an input voltage range of 85~264VAC (120~370VDC). Some features include high efficiency up to 87.5%, builtFin active PFC, and F25°C to +70°C operating temperature range. This series also has short circuit, over load, and over power protection. All models are RoHS compliant and have UL60950F1 (2nd edition), IEC60950F1:2005 (2nd edition), and EN60950F1:2006 safety approvals. MODEL SELECTION TABLE Output Current Model Number Input Voltage Range Output Voltage Min Max Ripple & Noise (1) Output Power Efficiency PSGKFF200F5 5 VDC 0A 40A 150mVpFp 200W 79% PSGKFF200F12 12 VDC 0A 16.7A 150mVpFp 200W 84% PSGKFF200F24 24 VDC 0A 8.4A 200mVpFp 201.6W 86% PSGKFF200F48 85 ~ 264 VAC (120 ~ 370 VDC) 48 VDC 0A 4.2A 200mVpFp 201.6W 87.5% NOTES 1. Ripple & noise is measured at 20MHz limited band width and using a 12" twisted pairFwire terminated with a 0.1µF & 47µF capacitors in parallel. 2. The power supply is considered a component which will be installed into final equipment. The final equipment must be reF confirmed that it still meets EMC directives. DERATING CURVE -25 0 10 20 30 40 50 60 70 80 90 100 100 Output Power (%) Ambient Temperature (°C)

Wall Industries, Inc. Rev A PSGKF-200 SERIES 12/11/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 2 of 4 SPECIFICATIONS: PSGKFF200 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS AC input voltage range 85 264 VAC Input Voltage DC input voltage range 120 370 VDC Input Frequency 47 63 Hz AC Current 3.5 A At 115VAC and cold start 30 Inrush Current At 230VAC and cold start 50 A At 115VAC 0.98 Power Factor At 230VAC 0.95 OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Accuracy F1.0 +1.0 % Voltage Adjustability F5 +10 %Vo Line Regulation Low Line to High Line F0.5 +0.5 % Load Regulation 0% to 100% full load F1.0 +1.0 % Output Power See Table Output Current See Table Ripple & Noise Measured at 20MHz BW and with 0.1µF and 47µF capacitors in parallel See Table HoldFup Time At 230VAC and full load 10 ms Setup Time At 230VAC and full load 2 s Temperature Coefficient F0.03 +0.03 %/°C Overshoot and Undershoot 5.0 % PROTECTION Short Circuit Protection Long term mode, autoFrecovery Over Power Protection Hiccup mode, automaticFrecovery 105 150 %Po Over Load Protection Hiccup mode, automaticFrecover y 105 150 %Io GENERAL SPECIFICATIONS Efficiency See Table Primary to Secondary ≤ 10mA 3000 Primary to PG ≤ 10mA 1500 Withstand Voltage Secondary to PG ≤ 10mA 500 VDC Isolation Resistance 100 MΩ Input to Output 0.25 Leakage Current Input to PG 1.0 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature See derating curve F25 +70 °C Storage Temperature F40 +85 °C Operating Humidity NonFcondensing 20 90 % RH Storage Humidity NonFcondensing 10 95 % RH Cooling BuiltFin DC fan Cooling by forced air MTBF MILFHDBKF217F; 25°C and full load 200,000 hours Vibration 10~150Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Weight 2.1 lbs (950g) SAFETY & EMI (See Note 2) Safety Approvals UL60950F1 (2nd edition), IEC60950F1:2005 (2nd edition), EN60950F1:2006 Conduction & Radiation EN55022, EN55024 Class B Harmonic Current EN61000F3F2,F3 EMS Immunity EN61000F4F2,3,4,5,6,8,11; EN55024, EN61000F6F2 heavy industry level

Wall Industries, Inc. Rev A PSGKF-200 SERIES 12/11/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 3 of 4 BLOCK DIAGRAM FAN EMI FILTER ACTIVE INRUSH CURRENT LIMITING RECTIFIERS POWER SWITCHING O.L.P . O.L.P . PFC & PWM CONTROL O.V.P . DETECTION CIRCUIT FAN SPEED CONTROL RECTIFIERS & FILTER I/P FG MECHANICAL DRAWING 7.83 [199.0] 4.96 [126.0] 0.47 [12.0] RV1 1.30 [33.0] 4 - M3 2 - M4 FAN FG CON1 4 - Ø0.17 [Ø4.4] 1.95 [49.5] 0.31 [8.0] 0.37 [9.5] 5.91 [150.0] Fixture A (option) 0.28 [7] 3.35 [85.0] 3.90 [99.0] 4.69 [199.0] Fixture B (option) 1.48 [37.5] 7.84 [199.0] 0.33 [8.5] 1.30 [33.0] 0.98 [25.0] 0.49 [12.5] Fixture A (131400003101) Unit: inches [mm] SMPS Cover Assembly Screw Customer Plate L ≤ 4mm L Fixture B (131400003201)

Wall Industries, Inc. Rev A PSGKF-200 SERIES 12/11/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 4 of 4 COMPANY INFORMATION Wall Industries, Inc. has created custom and modifi ed units for over 50 years. Our inFhouse research and development engineers will provide a solution that exceeds your performance re quirements onFtime and on budget. Our ISO9001F2008 certification is just one example of our commitment to producing a high quali ty, wellFdocumented product for our customers. Our past projects demonstrate our commitment to you , our customer. Wall Industries, Inc. has a reputat ion for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will contin ue to provide ongoing support for your project above and beyond the desig n and production phases. Give us a call today to d iscuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778F2300 Toll Free: /telephonesolid(888)597F9255 Fax: /telephonesolid(603)778F9797 EFmail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833