PSD2-A-053R3E PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
PSD2-Series – PSD2-A-xxxxE – Single Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 PSD2-A-xxxxE All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026 -0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PSD2-A series is a family of cost effective 2 W single output DC/DC converters. These converters are in an ultra miniature SMD 5-pin case. Devices are encapsulated. High performance features: 1500VDC and 3000VDC (for the most types) input/output isolation, industrial standard pinout, high power density. No heatsink required. PSD-SERIES 2 Watt Unregulated Single Output SMD Case 1.5 kV - 3 kV DC I/O Isolation 1 Sec. Short Circuit Prot. 2 Years Warranty (Date Code) Rev.07-2015 Input Specifications Voltage Range ±10% Current max. 105 – 506mA (See table) Current No -Load 15 – 30mA (See table) Filter Capacitors Reflected Ripple Current (@12uH) 15mA pk -pk Output Specifications Voltage accuracy See App Note Line regulation (per 1% Vin chang e) ±1.2% (1. 5% for 3.3Vout) Load regulation ( 10% to 100% ) See Table Ripple & noise (20 MHz bandwidth) 100 mV pk-pk Temperature coefficient ±0.03%/°C Capacitor load (Test: min. Vin + const. load) 220uF Short Circuit Protection (Supply voltage must b e discontinued at the 1 s end of short circuit ) General Specifications Efficiency Up to 84% (See table) Isolation I/O (60 sec) 1500VDC (standar d) 3000VDC (add “H30” ) Isolation I/O Capacitance 20 pF Isolation I/O Resistance 1000 M Ω, min. Switching Frequency 100 kHz Humidity (rel.) 95% MTBF (Calculated MIL -HDBK -217F) >3500 Khrs Pin Welding Temperature 300°C, max. Reflow Soldering 245°C, peak (217°C ≤60s ) Environment / Physical Specifications Operation Temp. -40°C to 105 °C Case Temp. Rise (nominal Input and full load ) 25°C Storage -55°C to 125 °C Cooling Nature / Free Air Case Material Plastic (UL94V -0 rated) Potting Epoxy (UL94V -0 rated) Weight ~1.6 g EMC Specifications Radiated Emissions * CISPR22/ EN55022 Class B Conducted Em issions * CISPR22/ EN55022 Class B ESD (contact ±8KV ) IEC-61000-4-2 Pref. Criteria B *Input filter components are required to meet (see App Note)
PSD2-Series – PSD2-A-xxxxE – Single Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # Input Voltage (VDC)Output Voltage (VDC)Output Current max. (mA)Output Current min. (mA)Input Current Full Load typ. (mA)Input Current no Load typ. (mA)Load Regulation (%)Efficiency (%) SINGLE OUTPUT PSD2-A-053R3E 5 3.3 400 40 506 30 18 78 PSD2-A-0505E 5 5 400 40 506 30 12 79 PSD2-A-0509E 5 9 222 22 506 30 9 82 PSD2-A-0512E 5 12 167 17 506 30 8 82 PSD2-A-0515E 5 15 133 13 506 30 7 83 PSD2-A-1205E 12 5 400 40 212 25 12 79 PSD2-A-1209E 12 9 222 22 212 25 9 82 PSD2-A-1212E 12 12 167 17 212 25 8 82 PSD2-A-1215E 12 15 133 13 212 25 7 83 PSD2-A-1224E 12 24 83 8 212 25 6 84 PSD2-A-1515E 15 15 133 13 169 18 7 83 PSD2-A-2405E 24 5 400 40 105 15 12 79 PSD2-A-2409E 24 9 222 22 105 15 9 82 PSD2-A-2412E 24 12 167 17 105 15 8 82 PSD2-A-2415E 24 15 133 13 105 15 7 83 PSD2-A-2424E 24 24 83 8 105 15 6 84 If you need other specifications, please enquire. For optional 3000KV isolation, please add “H30” For example: PSD2-A-1205EH30 Notes:
PSD2-Series – PSD2-A-xxxxE – Single Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 8.30 (0.327) 2.54 (0.10) 12.70 (0.50) SMD Series Datecode 7.25 (0.285) PEAK 0.60 (0.24) 1 2 4 8 5 All dimensions are typical in millimeters (inches). - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.7 (+/-0.028) Specification may change without notice. PSD2-Series Single output 7.00 (0.276) 7.62 (0.30) 1.45 (0.057) 11.20 (0.441) 105 100% 75% 50% 25% -40 -20 0 20 40 60 80 100 OUTPUT POWER AMBIENT TEMPERATURE (°C) TEMPERATURE DERATING GRAPH For 5V Output # SINGLE 1 - Vin 2 +Vin 4 - Vout 5 +Vout 8 N.C. PIN CONNECTIONS
PSD2-Series – PSD2-A-xxxxE – Single Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4 App Notes EMC Typical Recommended Circuit (CLASS B) L o a d +Vin -Vin Vout+ Vout- LDM C1 C3 PEAK PSD2-Series Only 24Vin or 24Vout Tolerance Envelope Curve 5, 9, 12, 15, 24 Vout: 3.3 Vout: 10% -10% -5% 10% 20% 40% 60% Typical Minimum Output Voltage Accurancy Output Current Maximum -15% 100% 10% -10% -5% 10% 20% 40% 80%Typical Minimum Output Voltage Accurancy Maximum -15% 100% Output Current Requirement on output load This module can operate efficiently and reliably if the minimum output load is not less than 10% of the full load. If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load. It is recommended to connect ceramic capacitor or electrolytic capacitor at the input and output of the DCDC converter. Do not use Tantalum capacitors. It is not recommended to increase the output power capability by connecting two or more converters in parallel. The product is not hot-swappable. No parallel connection or plug and play. Vout C1 + C2 C3 C4 24Vin or 24Vout LDM 3.3 4.7uF/50V 10 uF 1nF/2kV 6.8uH 5 4.7uF/50V 10 uF 1nF/2kV 6.8uH 9 4.7uF/50V 4.7 uF 1nF/2kV 6.8uH 12 4.7uF/50V 2.2 uF 1nF/2kV 6.8uH 15 4.7uF/50V 1 uF 1nF/2kV 6.8uH 24 4.7uF/50V 0.47 uF 1nF/2kV 6.8uH