PD10NG-053R3Z21 PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
PD10NG-XXXXZ2:1 1KV ISOLATED 2W REGULATED DUAL OUTPUT SIP8 Electrical Specifications (Typical at + 25℃ , nominal input voltage, rated output current unless otherwise specified) Input Specifions Voltage range 4.5-9, 9-18, 18-36 and 36-72 VDC Wide lnput Filter Capacitor type lsolation Specifications Rated voltage
1000 VDC
＞1 GΩ Capacitance 72PF Output Specifications Voltage accuracy +/−2 %, typ. Ripple and noise (at 20 MHz BW) 100 mV p-p, max. Short circuit protection Continuous, auto restart Line voltage regulation +/−0.2 % typ. Load voltage regulation Temperature coefficient +/−0.02 % / ℃ General Specifications Efficiency Continuous, auto restart Switching frequency 75 KHz, typ. Environmental Specifications Operating temperature (ambient) − 40 ℃ to + 80 ℃ Storage temperature − 55 ℃ to + 125 ℃ Humidity Up to 90 %, non condensing Cooling Free air convection Physical Characteristics Dimensions SIP 21.80 x 9.20 x 11.10 mm Case material Non conductive black plastic Samples of Partnumbers INPUT VOLTAGE (VDC) INPUT CURRENT NO LOAD (mA) INPUT CURRENT FULL LOAD (mA) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (max.mA) PD10NG-053R3Z2:1 4.5 - 9 487 +/− 3.3 ± 303 PD10NG-0505Z2:1 4.5 - 9 473 +/− 5 ± 200 PD10NG-0509Z2:1 4.5 - 9 467 +/− 9 ± 111 PD10NG-0512Z2:1 4.5 - 9 442 +/− 12 ± 83 PD10NG-0515Z2:1 4.5 - 9 442 +/− 15 ± 67 PD10NG-0524Z2:1 4.5 - 9 442 +/− 24 ± 42 PD10NG-123R3Z2:1 9 - 18 237 +/− 3.3 ± 303 PD10NG-1205Z2:1 9 - 18 227 +/− 5 ± 200 PD10NG-1209Z2:1 9 - 18 213 +/− 9 ± 111 PD10NG-1212Z2:1 9 - 18 213 +/− 12 ± 83 PD10NG-1215Z2:1 9 - 18 213 +/− 15 ± 67 PD10NG-1224Z2:1 9 - 18 213 +/− 24 ± 42 PD10NG-243R3Z2:1 18 - 36 117 +/− 3.3 ±303 PD10NG-2405Z2:1 18 - 36 109 +/− 5 ± 200 PD10NG-2409Z2:1 18 - 36 108 +/− 9 ±111 PD10NG-2412Z2:1 18 - 36 109 +/− 12 ± 83 PD10NG-2415Z2:1 18 - 36 107 +/− 15 ± 67 PD10NG-2424Z2:1 18 - 36 106 +/− 24 ± 42 PD10NG-483R3Z2:1 36 - 72 +/− 3.3 ± 303 PD10NG-4805Z2:1 36 - 72 +/− 5 ± 200 PD10NG-4809Z2:1 36 - 72 +/− 9 ± 111 PD10NG-4812Z2:1 36 - 72 +/− 12 ± 83 PD10NG-4815Z2:1 36 - 72 +/− 15 ± 67 PD10NG-4824Z2:1 36 - 72 +/− 24 ±42 PART NO. EFFICIENCY FULL LOAD (% TYP.) Telefon: +49 (0)6135 931069 Telefax: +49 (0)6135 931070 www.peak-electronics.de info@peak-electronics.de
PD10NG-XXXXZ2:1 1KV ISOLATED 2W REGULATED DUAL OUTPUT SIP8 Dimensions 3.20 typ. 0.50± 0.05 3.10 typ. 2.0± 0.50 2.54 typ. Recommended footprint details 2,54 XX.X± 0.5m/m XX.XX± 0.25m/m Unit : mm Derating Graph and Pinning Output Pin Connection Dual − V Input + V Input Ctrl Omitted NE + V Output − V Output Com Control input can be left open (3) No external connection allowed (5) 0.50± 0.05 1.0φ＋0.15 /－0 2,54 Safe Operating Area 21,8 9,2 11,10 0.25± 0.05 PEAK Modelcode Temperature Derating Graph Ambient Temperature C 2.00W －40 0 40 80 100 1 2 3 5 6 7 8
PD10NG-XXXXZ2:1 1KV ISOLATED 2W REGULATED DUAL OUTPUT SIP8 External capacitance: Pin 3 (CTRL) These converters will work with without external Control pin (ON/OFF) capacitors but they are necessary in order to Output starts at low or open and stops when high. guarantee the full line load range. All parts have Voltage applied via a limiting resistor and switching been tested using the following recommended diode. The converter is in a low power mode during values. the high level phase. Connection example Pin 5 (NE) This pin is used internally and must have have no external connection. Application Notes Pin 3: The outside control connection. This pin provides the converter output ON/OFF, and the control common is referred to negative input. Pin 5: This pin belongs to the secondary side. It just avoids someone to reverses the primary and secondary. Specification can be changed without notice. Copyright PEAK electronics GmbH REV: 1 / 03.2003 Cin 10uF/100V, low ESR. Cout 1/ Cout 2 100uF/25V, low ESR. MCU Vcc-5V CONVERTER 1N4148 PIN 3 Converter Cout 1 Cin + Vout - Vout + Vin - Vin Cout 2 Com