PSD1-B-2424Z

PSD1-B-3R305Z PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PSD1-Series – PSD1-B-xxxxZ – Dual Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 PSD1-B-xxxxZ All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026 -0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PSD1-B series is a family of cost effective 1 W dual output DC/DC converters. These converters are in an ultra miniature SMD 6-pin case. Devices are encapsulated. High performance features: 1500VDC and 3000VDC input/output isolation, industrial standard pinout, high power density. No heatsink required. PSD-SERIES  1 Watt  Unregulated  Dual Output  SMD Case  1.5 kV - 3 kV DC I/O Isolation  Continuous Short Circuit Prot.  2 Years Warranty (Date Code) Rev.07-2015 Input Specifications Voltage Range ±10% Current max. 52 – 389mA (See table) Current No -Load 10 – 25mA (See table) Filter Capacitors Reflected Rip ple Current (@12uH) 15mA pk -pk Output Specifications Voltage accuracy See App Note Line regulation (per 1% Vin change) ±1.2% , max . Load regulation ( 10% to 100% ) See Table Ripple & noise (20 MHz bandwidth) 60 mV pk-pk Temperature coefficient ±0.03%/°C Capacitor load (Test: min. Vin + const. load) 100uF Short Circuit Protection Continuous (exceptions see Table) General Specifications Efficiency Up to 82% (See table) Isolation I/O (60 sec) 1500VDC (standar d) 3000VDC (add “H30” ) Isolation I/O Capacitance 20 pF Isolation I/O Resistance 1000 M Ω, min. Switching Frequency 100 kHz Humidity (rel.) 95% MTBF (Calculated MIL -HDBK -217F) >3500 Khrs Pin Welding Temperature 300°C, max. Reflow Soldering 245°C, peak (217°C ≤60s ) Environment / Physical Specifications Operation Temp. -40°C to 105 °C Case Temp. Rise (nominal Input and full load ) 25°C Storage -55°C to 125 °C Cooling Nature / Free Air Case Material Plastic (UL94V -0 rated) Potting Epoxy (UL94V -0 rated) Weight ~2.0 g EMC Specifications Radiated Emissions * CISPR22/ EN55022 Class B Conducted Emissions * CISPR22/ EN55022 Class B ESD (contact ±6KV) IEC-61000-4-2 Pref. Criteria B *Input filter components are required to meet (see App Note)

PSD1-Series – PSD1-B-xxxxZ – Dual Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Dual Output Order # Input Voltage (VDC)Output Voltage (VDC)Output Current max. (mA)Output Current min. (mA)Input Current Full Load typ. (mA)Input Current no Load typ. (mA)Load Regulation (%)Efficiency (%) DUAL OUTPUT PSD1-B-3R305Z 3.3 ±5 ±100 ±10 389 25 12 76 PSD1-B-3R312Z 3.3 ±12 ±42 ±5 389 25 8 77 PSD1-B-3R315Z 3.3 ±15 ±33 ±3 389 25 7 78 PSD1-B-0505Z 5 ±5 ±100 ±10 250 20 12 80 PSD1-B-0509Z 5 ±9 ±56 ±6 250 20 9 80 PSD1-B-0512Z 5 ±12 ±42 ±5 250 20 8 79 PSD1-B-0515Z 5 ±15 ±33 ±3 250 20 7 81 PSD1-B-0524Z* 5 ±24 ±21 ±2 250 20 6 81 PSD1-B-1205Z 12 ±5 ±100 ±10 104 15 12 80 PSD1-B-1209Z 12 ±9 ±56 ±6 104 15 9 80 PSD1-B-1212Z 12 ±12 ±42 ±5 104 15 8 81 PSD1-B-1215Z 12 ±15 ±33 ±3 104 15 7 81 PSD1-B-1224Z 12 ±24 ±21 ±2 104 15 6 81 PSD1-B-1515Z 15 ±15 ±33 ±3 83 12 7 81 PSD1-B-2405Z* 24 ±5 ±100 ±10 52 10 12 80 PSD1-B-2409Z* 24 ±9 ±56 ±6 52 10 9 80 PSD1-B-2412Z* 24 ±12 ±42 ±5 52 10 8 81 PSD1-B-2415Z* 24 ±15 ±33 ±3 52 10 7 82 PSD1-B-2424Z* 24 ±24 ±21 ±2 52 10 6 80 * Converters marked with a star: Short circuit Protection ist only 1s, max * Supply voltage must be discontinued at the end of short circuit. If you need other specifications, please enquire. For optional 3000KV isolation, please add “H30” For example: PSD1-B-1205ZH30 Notes:

PSD1-Series – PSD1-B-xxxxZ – Dual Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating Modelcode Datecode PEAK 1 2 4 5 10 7 All dimensions are typical in millimeters (inches). - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.7 (+/-0.028) Specification may change without notice. PSD1-Series Dual output 8.30 (0.327) 11.20 (0.441) 2.54 (0.10) 0.60 (0.24) 15.24 (0.60) 7.25 (0.285) 7.00 (0.276) 1.45 (0.057) 105 100% 75% 50% 25% -40 -20 0 20 40 60 80 100 OUTPUT POWER AMBIENT TEMPERATURE (°C) TEMPERATURE DERATING GRAPH # SINGLE 1 - Vin 2 +Vin

4 Common

10 N.C. PIN CONNECTIONS App Notes

PSD1-Series – PSD1-B-xxxxZ – Dual Output – SMD - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4 EMC Typical Recommended Circuit (CLASS B) L o a d +Vin -Vin Vout+ Vout- LDM C1 C2 PEAK PSD1-Series dual Only 15/24Vin Tolerance Envelope Curve 10% -10% -5% 10% 20% 40% 60% Typical Minimum Output Voltage Accurancy Output Current Maximum -15% 100% Requirement on output load This module can operate efficiently and reliably if the minimum output load is not less than 10% of the full load. If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load. It is recommended to connect ceramic capacitor or electrolytic capacitor at the input and output of the DCDC converter. Do not use Tantalum capacitors. It is not recommended to increase the output power capability by connecting two or more converters in parallel. The product is not hot-swappable. No parallel connection or plug and play. Vout C1 C2 C3 Only 15/24Vin or 24Vout LDM ±5 4.7uF/50V 4.7 uF 1nF/2kV 6.8uH ±9 4.7uF/50V 2.2 uF 1nF/2kV 6.8uH ±12 4.7uF/50V 1 uF 1nF/2kV 6.8uH ±15 4.7uF/50V 1 uF 1nF/2kV 6.8uH ±24 4.7uF/50V 0.47 uF 1nF/2kV 6.8uH