PSC60M-120 PHIHONG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Applications

Mechanical Characteristics Output Specifications Load Model DC Output Voltage Min. Max. Ripple (1) P-P (max.) Regulation L-L PSC60M-120* +12V 0A 5A 120mV ±5% PSC60M-240* +24V 0A 2.5A 240mV ±5% (1) Measured with using 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. *PSC60M-120 is CEC Level III115VAC Compliant and PSC60M-240 is CEC Level IV115VAC Compliant Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications.

  • Low Cost • Non-vented/Spill-proof Case
  • CEC compliant* • No Load Power Consumption < 0.60W
  • Class B EMI • Low Profile Design
  • Portable Equipment • Networking
  • Peripherals • Gaming Machines
  • cUL/UL60950-1 • TUV EN60950-1
  • CE • Meeting Cal. Prop. 65
  • Length: 130mm (5.12in) • Height: 32mm (1.30in)
  • Width: 60mm (2.36in) • Weight: 300g (10.58oz.)

PSC60M Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Rating 100 to 240VAC AC Input Voltage Range 90 to 264VAC AC Input Frequency 47/63Hz Input Current 1.6A (rms) Max. @ 115VAC 0.7A (rms) Max. @ 230VAC Leakage Current 250uA Max. @ 254VAC 60hz. Inrush Current (cold) 90A for 110VAC at Max. load 150A for 240VAC at Max. load (Cold start @ ambient 25°C) Input Power Saving < 0.60W for 240VAC at no load OUTPUT: Efficiency 84% minimum average efficiency Hold-up Time 10mS Min. @ 120VAC and Max. load Over-voltage Protection Output shuts down and recovers after reset AC power Over-current Protection Output equipped with short circuit protection – auto restart Short Circuit Protection Output can be shorted without damage ENVIRONMENTAL: Temperature Operation 0 to +40°C Non-operation -5 to +80°C Humidity Operation 10 to 90% Emissions FCC Class B EN55022 Class B Dielectric Withstand (Hi-pot) Test Primary to Secondary: 1500VAC for 1 minute, 10mA DC Output Connector 2.1x5.5mm Center Positive Standard Dimension Diagram Unit: mm