PSB-2400L2 GWINSTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
FEATURES
Good Will Instrument Co., Ltd.Simply ReliableSimply ReliableGood Will Instrument Co., Ltd. * Output Voltage Rating : 80V/800V, Output Power Rating : 400W ~ 800W * Constant Power Output for Multi-Range (V & I) Operation * Series and Parallel Operation (2 Units in Series or 4 Units in Parallel Maximum) * 90 Degree Angle Rotatable Control Panel * Sequence Function Edited by PC will be Controlled Through Power Supply Optional Interfaces * Standard Interface : RS-232C/USB/Analog Control Interface * Optional Interface : GPIB * Preset Function (3 Points) * LabVIEW Driver Programmable Switching D.C. Power Supply (Multi-range D.C. Power Supply) PSB-2400L/PSB-2400H/ PSB-2800L/PSB-2800H PSB-2400L2 PSB-2800LS PSB-2400L2PSB-2800LPSB-2400L 210(W) x 124(H) x 290(D)mm Approx.5kg Approx.7kg Approx.7kg Power Source Power Consumption/Factor Inrush Current Cooling Method Interface (Optional) Interface (Standard) Analog Control 560VA/0.99 1120VA/0.99 1120VA/0.99 35A Max 70A Max 70A Mmax 0 ~ 80V 0 ~ 80V 0 ~ 80V x 2CH 0 ~ 40A 0 ~ 80A 0 ~ 40A x 2CH 400W 800W 800W 0.01% ± 3mV of rated voltage 0.01% ± 2mV of rated voltage 0.02% ± 3mA of rated current 0.01% ± 2mA of rated current 90mV 150mV 90mV 4mV 6mV 4mV 30mA 60mA 30mA 0.1% setting±2digits 0.2%setting±2digits ± 10W 0.2% reading±2digits 0.3% reading±2digits 0.5% reading±5digits 50ms 100ms 500ms 1ms 10mV 10mA 10W 10mV 10mA 10W Output off when 110% of rated voltage Output off when operating; Setting range:1V~84V with front panel Output off when 110% of rated current Output off when operating;Setting range:1A~42A(84A for model number) Output off above heat sink setting temperature 0 ~ 40℃℃ ﹣20 ~ 70℃℃ 30% ~ 80% RH no dew condensation)( 30% ~ 80% RH no dew condensation)( Voltage Current Power Load Line Load Line CV p-p CV rms CC rms Voltage Current Power Voltage Current Power Raise Time(Full load/No load) Fall Time(Full load) Fall Time(No load) Load Transient Recover Time (Load change from 50~100%) Voltage Current Power Voltage Current Power OVP (Fixed) OVP (Variable) OCP (Fixed) OCP (Variable) OHP Operation Temp Storage Temp Operating Humidity Storage Humidity OUTPUT RATING REGULATION (CV) REGULATION (CC) RIPPLE & NOISE (Noise Bandwidth 20MHz ; Ripple Bandwidth=1MHz) PROGRAMMING ACCURACY READ BACK ACCURACY RESPONSE TIME PROGRAMMING RESOLUTION MEASUREMENT RESOLUTION SERIES AND PARALLEL CAPABILITY PPROTECTION FUNCTION ENVIRONMENT CONDITION PSB-2800HPSB-2400H PSB-2800LS Approx. 6kgApprox. 5kg Approx. 7kg 1120VA/0.99560VA/0.99 1120VA/0.99 35A Max 70A Max 70A Max 80V 80A 800W 0 ~ 6A0 ~ 3A 800W400W 0.01% ± 30mV of rated voltage 0.01% ± 20mV of rated voltage 0.05% ± 15mA of rated current 0.05% ± 10mA of rated current 300mV(only output voltage measures more than 1% of the rated voltage) 250mV(only output voltage measures more than 1% of the rated voltage) 25mV(when current measures<2A)20mV(when current measures<2A) 40mV(when current measures>2A)35mV(when current measures>2A) 20mA15mA 0.1% setting±2digits 0.2% setting±2digits ±10W (only output voltage measures more than 1% of rated voltage) 0.2% reading±2digits 0.3% reading±2digits 0.5% reading±Vout x 40mA 200ms 500ms 1000ms 7ms 100mV 10mA 10W 100mV 10mA 10W 0 ~ 800V0 ~ 800V Output off when output voltage exceeds 110% of rated voltage Presettable in range from 10V ~ 840V om front panel Output off when output voltage exceed 110% of rated current Presettable in range from 0.1A ~ 6.30A om front panel Output off at the intemal heat sink temperature over setting value N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Forced air-cooling with fan motor 100VAC ~ 240VAC, 50/60Hz, Single phase GPIB RS-232C/USB Yes DIMENSIONS & WEIGHT OTHER Channel Number 11 2 11 For PSB-2800L Only N/A N/A Up to 2 Units Up to 2 Units N/A N/A N/A N/A N/A Up to 2 Units Up to 4 Units Up to 3 Units Up to 2 Units Up to 4 Units N/A Series Operation Parallel Operation Parallel with booster PSB-2800LS SPECIFICATIONSThe PSB-2000 Series is a high power density, programmable and multi-range output DC power supply. There are six models in the series including one power booster unit. The PSB-2000 Series has the output voltage of 0~80V and 0~800V, and the output power ranges of 0~400W and 0~800W. The multi-range output functionality facilitates flexible collocations of higher voltage and larger current under the rated power range. Both series and parallel connections can be applied to the PSB-2000 Series to fulfill the requirements of higher The PSB-2000 Series provides analog control interfaces on the rear panel to control PSB-
2000 Series output via the external voltage or to externally monitor voltage and current
output status of power supply. The PSB-2000 Series panel can be rotated 90 degree angle suitable for vertical or horizontal position to accommodate the ideal space utilization. The PSB-2000 Series protects over voltage and over current. The power supply output function will be shut down to protect DUTs while the protection mechanism is triggered to function. When conducting battery charging operation, the Hi- mode of the PSB-2000/c87 Series will prevent reverse current from damaging power supply. The PSB-2000 Series provides three sets of preset function keys to memorize regularly used settings of voltage, current and power that users can recall rapidly. The sequence function, via RS232C, USB interface or optional GPIB interface, can connect with the computer to produce output power defined by sequence of a series of set voltage and current steps that are defined by the computer. This function is often used to establish a standard test procedure for the verification of the influence on DUTs done by the swiftly changing operating SERIES OPERATION PARALLEL OPERATION MODEL NUMBER SINGLE UNIT TWO UNITS PSB-2400L 80V/40A 160V/40A PSB-2800L 80V/80A 160V/80A PSB-2800LS (Booster Unit for PSB-2800L Only) N/A N/A PSB-2400L2 N/A N/A PSB-2400H N/A N/A PSB-2800H N/A N/A MODEL NUMBER SINGLE UNIT TWO UNITS THREE UNITS FOUR UNITS PSB-2400L 80V/40A 80V/80A 80V/120A 80V/160A PSB-2800L 80V/80A 80V/160A 80V/240A 80V/320A PSB-2800LS N/A 80V/160A (PSB-2800L x 1+ PSB-2800LS x 1) 80V/240A (PSB-2800L x 1+ PSB-2800LS x 2) N/A PSB-2400L2 N/A N/A N/A N/A PSB-2400H 800V/3A 800V/6A N/A N/A PSB-2800H 800V/6A 800V/12A N/A N/A Note : PSB-2400H/PSB-2800H are not CE approved Analog Control Local Bus Front/Rear Output
Programmable Switching D.C. Power Supply (Multi-range D.C. Power Supply) PSB-2400L/PSB-2400H/ PSB-2800L/PSB-2800H PSB-2400L2 PSB-2800LS PSB-007 Joint Kit PSB-001 GPIB Control Board PSB-005 Parallel Connection Signal Cable PSB-006 Series Connection Signal Cable GRJ-1101 Local Bus PSB-008 RS-232C Cable ACCESSORIES : OPTIONAL ACCESSORIES
ORDERING INFORMATION
User Manual (CD) x 1, AC Power Cord x 1, External Control Connector (26pin), Screws for output terminals on rear panel, Protection covers for output terminals on rear panel, Protection caps for output terminals on the front panel, GND Cable, USB Cable (For Model Number : PSB-2400L; PSB-2800L; PSB-2400L2; PSB-2400H; PSB-2800H) Local Bus (For Model Number : PSB-2400L; PSB-2800L; PSB-2400L2; PSB-2400H; PSB-2800H) 0~80V/0~40A/400W Multi-Range DC Power Supply 0~80V/0~80A/800W Multi-Range DC Power Supply 0~80V x 2/0~40A x 2/800W Multi-Range DC Power Supply 0~800V/0~3A/400W Multi-Range DC Power Supply 0~800V/0~6A/800W Multi-Range DC Power Supply 800W Slave (Booster) Unit For Current Extension Only PSB-2400L PSB-2800L PSB-2400L2 PSB-2400H PSB-2800H PSB-2800LS GPIB Card Parallel Connection Kit for Horizontal Installation. Kit Includes : (PSB-007 Joint Kit, Horizontal bus bar x 2 , PSB-005 x1) Parallel Connection Kit for Vertical Installation. Kit Includes : (PSB-007 Joint Kit, Verical bus bar x 2, PSB-005 x 1) Parallel Connection Signal Cable Series Connection Signal Cable Joint Kit : Includes 4 Joining Plates, (M3x6)screws x 4 ; (M3x8)screw x 2 PSB-001 PSB-003 PSB-004 PSB-005 PSB-006 PSB-007 PSB-008 GRJ-1101 GRA-424 RS232C Cable (PSB-2000 Only) Local Bus Rack Adapter Kit, 19", 2U Size Rear Panel POWER SUPPLIES POWER SUPPLIES GTL-232 GTL-248 GTL-246 GTL-251 RS-232C Cable GPIB Cable USB Cable GPIB USB Cable (high speed) PSB-003 Parallel Connection Kit for Horizontal Installation PSB-004 Parallel Connection Kit for Vertical Installation MULTI-RANGE OUTPUT OPERATION PRODUCTS IN THE SERIES Compared with the maximum power output of the conventional power supply that is calculated by the maximum output voltage multiplies by the maximum output current, the PSB-2000 series, defying the formula, has a unique characteristic of multi-range output (voltage and current). This distinguishing feature, under the same maximum power output range, can output a higher voltage with a smaller current and vice versa. For instance, for a conventional power supply with a maximum power output of 360W, the maximum voltage and current outputs are likely to be 10V and 36A respectively. Comparatively, PSB-2400L, with the maximum power output of 400W, provides voltage and current output ranges of 0~80V and 0~40A. The maximum current of 5A will be provided when the voltage reaches 80V and the maximum voltage of 10V for the maximum current of 40A. PSB-2400L, breaking the limitation of Pmax=Vmax x Imax,, broadens voltage and current application ranges. The following diagrams illustrate the voltage and current comparison between the multi-range output power supply and the conventional power supply. The operation area of a Conventional Power Supply The operation area of a Multi-Range Power Supply for PSB-2000 Series There are six models in the PSB-2000 Series. Model type, output voltage, output current and output power are as follows : * PSB-2800LS, a booster unit acting as slave to extend current, can not operate alone. It must operate with PSB-2800L master. The maximum current under the highest output voltage is power/voltage. For instance, when PSB-2400L outputs 80V the maximum current is 400W/80V = 5A . * Same as above. When PSB2400L outputs 40A the highest voltage is 400W/40A = 10V . MODEL Channel Number Voltage Rating Current Rating* Output Power (Max.) PSB-2400L2PSB-2800LPSB-2400L 0 ~ 80V 0 ~ 80V 0 ~ 80V x 2CH 0 ~ 40A 0 ~ 80A 0 ~ 40A x 2CH 400W 800W 800W PSB-2800HPSB-2400H PSB-2800LS* 80V NA 80A 800W 0~6 A0~3 A 800W400W 0 ~ 800V 0 ~ 800V 10V 36A PSH-1036A Output Current (A) P = 360WMAX (Only One Point) Output Voltage (V) 3 Good Will Instrument Co., Ltd.Simply ReliableSimply ReliableGood Will Instrument Co., Ltd. (PSB-2000 Only) F.C. SERIES AND PARALLEL CONNECTIONS Hence, the PSB-2000 Series, with its multi-range output function and the power extension capability of series and parallel connections, is the high power density and high performance to cost ratio DC power supply, which provides Series Connection Parallel Connection a wider range of power applications for any limited equipment space. The PSB-2000 Series is an ideal selection for testing DC power supply module, automobile lithium and lithium iron battery and electronic parts. FREE DOWNLOAD Driver Labview Driver
Programmable Switching D.C. Power Supply (Multi-range D.C. Power Supply) POWER SUPPLIES POWER SUPPLIES Good Will Instrument Co., Ltd.Simply ReliableSimply ReliableGood Will Instrument Co., Ltd. The PSB-2000 Series provides three sets of parameter preset function keys on the front panel and each parameter preset memory includes output voltage, output current and output power. D. PRESET FUNCTION Users can speedily recall frequently used settings through operating the front panel preset keys to store everyday settings. F.F. Example for the sequence operation SEQUENCE FUNCTION When applying sequence function, the computer must first edit a series of steps defined by different voltage, current and duration, which, in CSV format, will be sent to PSB-2000 memory via RS-232C, USB interface or GPIB interface (optional) to periodically produce a series of steps defined by different voltage, current and duration. The minimum time for each sequence is set to one second and the maximum number of step is 100. This function is to test the impact of DUTs done by the rapidly changing power supply. The reliability test of electronics products toward changing power supply is one of the very important verification items. E. OVP AND OCP FUNCTIONS When the voltage and current outputs exceed the preset conditions, the PSB-2000 Series will shut down the output function to prevent DUTs from damaging. The OVP and OCP protection level can be MODEL NUMBER MODEL NUMBER PSB-2400L PSB-2400L PSB-2800L PSB-2800L PSB-2400L2 PSB-2400L2 PSB-2800LS PSB-2400H PSB-2400H PSB-2800H PSB-2800H 1.0V to 84.0V 1.0A to 42.0A 1.0A to 84.0A 0.1A to 3.15A 0.1A to 6.30A10.0V to 840.0V OVP SETTING RANGE OVP SETTING RANGE set to 10 110 of the rated voltage or current and the％〜 ％ preset condition is 110% of the rated voltage and current. F.I. DELAY FUNCTION The delay function is available on the dual channel model (PSB-2400L2) only. It adds a rise and fall delay time to the output of channel 2 for a specified amount of time (in seconds) from a reference point (output of channel 1). The rise delay time refers to the delay time for turning the output on. The fall delay time refers to the delay time for turning the output off. F.J. EXTERNAL CONTROL AND ANALOG MONITORING FUNCTION The rear panel of the PSB-2000 Series provides 26-Pin analog control connector and users can control output voltage and current value via external voltage or resistance. Furthermore, power supply's output on and off or AC input shut down can also be executed through the external control connector. The designated pin of the port can be measured to monitor output voltage and current. The following diagrams illustrate several typical external control application connections. Please refer to product user manual for more or detailed connection methods. External Voltage Monitor of the Output External Voltage Control of the output Taking working space utilization into consideration, PSB-2000 can be placed vertically or horizontally by its unique design of 90 degree angle rotatable control panel for users' ease-of-use. H. 90 DEGREE ANGLE ROTATABLE CONTROL PANEL The tracking function is available on the dual output model (PSB-2400L2) only. It allows the setting of both channels to be changed at the same time. When the value of the one channel is changed, and the other channel will automatically change its value accordingly if the tracking function is active (ON). TRACKING FUNCTIONG.