PSAYC WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Wall Industries, Inc. Advanced Publication PSAYC SERIES

2 Watt AC/DC Switching Power Supplies

06/27/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603877882300 • Toll Free: 888859789255 • Fax 603877889797 website: www.wallindustries.com • e8mail: sales@wallindustries.com Page 1 of 3

FEATURES

  • RoHS Compliant
  • Isolation Class II
  • 2 Watts Output Power
  • Low Ripple and Noise
  • Single Outputs
  • UL/cUL, CE, CB Safety Approvals
  • PCB Mountable Switching Power Supply
  • Fully Encapsulated Plastic Case
  • 840°C to +80°C Operating Temperature Range
  • < 0.3W No Load Power Consumption
  • Universal Input Range: 908305VAC (1208430VDC)
  • Short Circuit, Over Power, and Over Voltage Protection

DESCRIPTION

Size: 1.33 x 0.87 x 0.67 inches 33.7 x 22.2 x 17.0 mm The PSAYC series of AC/DC switching power supplies provides 2 watts of output power in a 1.33” x 0.87” x 0.67” encapsulated PCB mountable package. This series consists of single output models with a universal input range of 908305VAC (1208430VDC). Some features include low ripple and noise, 840°C to +80°C operating temperature range, and over power, over voltage, and short circuit protection. All models are RoHS compliant and have UL/cUL, CE, and CB safety approvals. MODEL SELECTION TABLE Output Current Model Number Input Voltage Output Voltage Min Load Max Load Line Regulation Load Regulation Output Power Efficiency Maximum Capacitive Load PSAYC83.3S 3.3 VDC 0% 600mA ±1.0% ±1.5% 2W 68% 14, 000μF PSAYC85S 5 VDC 0% 400mA ±1.0% ±1.5% 2W 71% 8,000μF PSAYC89S 9 VDC 0% 222mA ±1.0% ±1.5% 2W 75% 2400µF PSAYC812S 12 VDC 0% 167mA ±1.0% ±1.5% 2W 76% 1000μF PSAYC815S 15 VDC 0% 133mA ±1.0% ±1.5% 2W 76% 700μF PSAYC824S 90~305 VAC (120~430 VDC) 24 VDC 0% 83mA ±1.0% ±1.5% 2W 77% 220μF BLOCK DIAGRAM DERATING CURVE Single Output RECTIFIER SWITCHING RECTIFIER LINE FILTER INPUT CONTROL OSCILLATION DETECT OUTPUT L N 120 100 -40 -20 0 20 40 60 80 100 Load (%) Ambient Temperature (°C) 25%

Wall Industries, Inc. Advanced Publication PSAYC SERIES 06/27/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603877882300 • Toll Free: 888859789255 • Fax 603877889797 website: www.wallindustries.com • e8mail: sales@wallindustries.com Page 2 of 3 SPECIFICATIONS: PSAYC SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS AC input voltage range 90 305 VAC Input Voltage DC input voltage range 120 430 VDC Input Frequency 47 63 Hz At 115VAC and full load 75 Input Current At 230VAC and full load 55 mA At 115VAC 15 Inrush Current (<500µs) At 230VAC 25 A No Load Power Consumption 0.3 W External Fuse (recommended) 3.15A slow blow type OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Accuracy 85 +5 % Line Regulation Low line to high line 81 +1 % Load Regulation 0% to 100% load 81.5 +1.5 % Output Power 2 W Output Current See Table Minimum Load 0 % 120Hz 1 Ripple & Noise 100kHz Measured at 20MHz BW with 0.1µF and 47µF capacitors in parallel 0.25 Vp8p Max Capacitive Load See Table Hold8Up Time At 230VAC 15 ms Temperature Coefficient 80.02 +0.02 %/°C PROTECTION Short Circuit Protection Hiccup mode, indefinite (auto8recovery) Over Voltage Protection Zener diode clamp Over Power Protection Hiccup technique, auto8recovery GENERAL SPECIFICATIONS Efficiency See Table Isolation Voltage Input to output 3000 VAC Leakage Current 0.25 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature With derating (see derating curve) 840 +80 °C Storage Temperature 840 +85 °C Humidity 95 % RH Cooling Free air convection MTBF 25°C (MIL8HDBK8217F) 350,000 hours PHYSICAL SPECIFICATIONS Weight TBD Case Material Plastic resin with fiberglass (Flammability to UL 94V80) SAFETY & EMC Safety Approvals (pending) UL/cUL, CE, CB EMI (Conducted and Radiated Emissions) EN 55022 Class B EMC (pending) EMS (Noise Immunity) EN 55024

Wall Industries, Inc. Advanced Publication PSAYC SERIES 06/27/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603877882300 • Toll Free: 888859789255 • Fax 603877889797 website: www.wallindustries.com • e8mail: sales@wallindustries.com Page 3 of 3 MECHANICAL DRAWING NOTES 1. Unit: inches (mm) 2. Tolerance: ±0.02 (±0.5) 3. Weight: TBD 4. Case Material: Plastic resin with /f_iberglass 5. All dimensions are for reference only 0.87 (22.2) TOP VIEW 0.02 (0.6) 0.30 (7.62) 1.33 (33.7) 1.10 (28.0) PIN CONNECTIONS Pin No Assignment

1 AC IN (N)

2 AC IN (L)

Wall Industries, Inc. has created custom and modified units for over 50 years. Our in8house research and development engineers will provide a solution that exceeds your performance requirements on8time and on budget. Our ISO900182008 certification is just one example of our commitment to producing a high quality, well8documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)77882300 Toll Free: /telephonesolid(888)59789255 Fax: /telephonesolid(603)77889797 E8mail: sales@wallindustries.com Web: www.wallindustries.com Address: 5 Watson Brook Rd. Exeter, NH 03833