Microsoft Word - PSAPF150.doc
Document overview
- Manufacturer or author: dhoutz
- PDF pages: 4
Technical content
Wall Industries, Inc. Rev A PSAPF150 SERIES
150 Watt, AC/DC LED Switching Power Supplies
05/08/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 4
FEATURES
Isolation Class II RoHS Compliant Built-in Active PFC Function 150 Watts Maximum Output Power Free Air Convection MTBF > 75,000 Hours Up to 93.5% High Efficiency LED Power Applications Fully Isolated Plastic Case with IP67 Level 3-in-1 Dimming Function (1~10VDC & PWM Signal or Resistance) Universal Input Voltage: 90~305VAC (120~430VDC) Short Circuit, Over Voltage, Over Power, and Over Temperature Protection Output Voltage and Constant Current Level can be Adjusted through Internal Potentiometer
DESCRIPTION
Size: 5.66 x 2.79 x 1.48 inches 143.8 x 70.8 x 37.5 mm Applications: Street Lighting Landscape Lighting Tunnel Lighting Household Lighting Indoor/Outdoor LED Lighting The PSAPF150 series of AC/DC LED switching powe r supplies provides a maximum power rating of 150W in a 5.66” x 2.79” x 1.48” fully isolated plastic case. These supplies meet IP67 waterproof standards, which makes them suitable for harsh environments in industrial or commercial outdoor lighting applications. The PSAPF150 series boasts the industry’s widest input voltage range of 90-305VAC (120~430VDC) and has built-in active PFC, built-in dimming function, and high efficiency up to 93.5%. This series is RoHS compliant and has short circuit, over voltage, over power, and over temperature protection. MODEL SELECTION TABLE Model Number Input Voltage Output Voltage Constant Current Range Output Current (Convection) Current Adj. Range Ripple & Noise (1) Maximum Capacitive Load Maximum Output Power Efficiency PSAPF150-12S 12 VDC 6~12 VDC 12.5A 1. 25~12.5A 100mVp-p 100,000μF 150W 90.5% PSAPF150-24S 24 VDC 12~24 VDC 6.25A 0.625~6.25A 100mVp-p 50,000μF 150W 92.5% PSAPF150-36S 36 VDC 18~36 VDC 4.166A 0.416 ~4.166A 100mVp-p 33,000μF 150W 93.5% PSAPF150-48S 48 VDC 24~48 VDC 3.125A 0.312~3.125A 200mVp-p 6,000μF 150W 92.5% PSAPF150-54S 90~305VAC (120~430VDC) 54 VDC 27~54 VDC 2.777A 0.377~2.777A 200mVp-p 6,000μF 150W 92.5% NOTES 1. Ripple & Noise is measured at 20MHz bandwidth and with 0.1μF and 47μF capacitors in parallel. DERATING CURVES Load vs Ambient Temperature Load vs Input Voltage 100 120 -30 -20 -10 0 10 20 30 40 50 60 70 80 Load (%) Ambient Temperature (°C) 50% 25% 100 120 115 135 155 230 264 305 Load (%) Input Voltage (VAC) Ta=25°C
Wall Industries, Inc. Rev A PSAPF150 SERIES 05/08/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 4 SPECIFICATIONS: PSAPF150 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS AC input voltage range 90 305 VAC Input Voltage Range DC input voltage range 120 430 VDC Input Frequency 47 63 Hz 115VAC and full load 2 230VAC and full load 1 Input Current 277VAC and full load 0.9 A 115VAC 40 Inrush Current (< 2ms) 230VAC 60 A 115VAC and full load 0.97 230VAC and full load 0.95 Power Factor 277VAC and full load 0.9 OUTPUT SPECIFICATIONS Output Voltage See Table Constant Current Range See Table Voltage Accuracy -2 +2 % Current (Convection) See Table Current Adjustment Range See Table Line Regulation -1 +1 % Load Regulation -1 +1 % Minimum Load 1 % Hold-Up Time 25 ms Maximum Capacitive Load See Table Output Power 150 W Ripple & Noise Measured at 20MHz bandwidth and with 0.1μF and 47μF capacitors in parallel See Table Temperature Coefficient 0~50°C -0.02 +0.02 %/°C PROTECTION Over Voltage Protection Automatic Recovery Over Power Protection Automatic Recovery Over Temperature Protection Automatic Recovery Short Circuit Protection Automatic Recovery GENERAL SPECIFICATIONS Efficiency See Table Switching Frequency 100 133 KHz Input to Output 3750 Input to FG 1880 Withstand Voltage Output to FG 500 VAC Leakage Current 0.75 mA Dimming Function See page 3 ENVIRONMENTAL SPECIFICATIONS Operating Temperature See derating curve -30 +70 °C Storage Temperature -40 +85 °C Humidity 95 % RH Vibration 10~500Hz, 5G 10 min./1 cycle, 60 min. each along X,Y,Z axes Cooling Free air convection MTBF MIL-HDBK-217F (@ 25°C) 75,000 hours PHYSICAL SPECIFICATIONS Weight 1.41 lbs (640g) SAFETY & EMC Agency Approvals UL60950, EN61347-1:2008, EN61347-2-13:2006 EMI (Conduction & Radiation) EN55015 EMS (Noise Immunity) EN61547 Surge 2KV L-L, 4KV L-E
Wall Industries, Inc. Rev A PSAPF150 SERIES 05/08/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 3 of 4 DIMMING OPERATION Built-in 3-in-1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a 100KΩ VR or 1~10V or 10V PWM signal between +DIM and -DIM I. 1~10V Dimming Function for Output Current Adjustment (typ.) 0.0% 10.0% 20.0% 30.0% 40.0% 50.0% 60.0% 70.0% 80.0% 90.0% 100.0% 110.0% 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V DIM (V) Io % II. 10V PWM Signal for Output Current Adjustment (typ): frequency Range: 100Hz~3KHz 0.0% 10.0% 20.0% 30.0% 40.0% 50.0% 60.0% 70.0% 80.0% 90.0% 100.0% 110.0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% DIM (PWM) Io % III. It can control 10~100% Output Current but must add 100KΩ VR in parallel BLOCK DIAGRAM EMI FILTERL N BRIDGE RECTIFIER PFC CIRCUIT POWER SWITCHING RECTIFIER & FILTER DETECTION CIRCUIT PFC & PWM CONTROL O . P. P. O.T.P . O.V.P . O.C.P . (GND) +DIM -DIM O.L.P .
Wall Industries, Inc. Rev A PSAPF150 SERIES 05/08/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 4 of 4 MECHANICAL DRAWING 0.39 (10.0) 6.45 (163.8) 6.06 (153.8) 5.66 (143.8) Unit: inches (mm) AC/L (Brown) AC/N (Blue) +DIM -DIM (Red) (Black) (White) (Black) 0.13 (3.2) 2.79 (70.8) 1.48 (37.5) TOP VIEW Tolerance: 0.08” (±2mm) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 5 Watson Brook Rd. Exeter, NH 03833