PSA-4005 PHIHONG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

40W Universal Input Series40W Universal Input Series40W Universal Input Series40W Universal Input Series40W Universal Input Series PSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power Supply Output SpecificationsOutput SpecificationsOutput SpecificationsOutput SpecificationsOutput Specifications PSA-4005 PSA-4012 PSA-4015 PSA-4024 PSA-4031 PSA-4032 PSA-4033 PSA-4034 PSA-4035 Mechanical CharacteristicsMechanical CharacteristicsMechanical CharacteristicsMechanical CharacteristicsMechanical Characteristics Dimensions: • Length: 127mm (5.0in) • Height: 30mm (1.2in)

  • Width: 76.2mm (3.0in) • W eight: 0.27kgs (0.6Ibs) Safety ComplianceSafety ComplianceSafety ComplianceSafety ComplianceSafety Compliance
  • UL 1950 • VDE 0806
  • CSA 22.2 1402C Level 3 • EN 60950 ApplicationsApplicationsApplicationsApplicationsApplications
  • Disk drive systems • Test equipment
  • Peripheral equipment • Microprocessor based systems FeaturesFeaturesFeaturesFeaturesFeatures
  • High efficiency • Over voltage protection
  • Built-in EMI filter • Short circuit protection
  • 100% Burn-in for 24hrs. • UL/CSA/VDE approval Model DC Output Load Ripple Total Voltage Min. Max. @20CFM Peak P-P (2) Tolerance +5V +12V +15V +24V +5.1V +12V -12V +5.1V +12V -12V +5.1V +12V -5V +5.1V +15V -15V +5.1V +24V 0.0A 0.0A 0.0A 0.0A 0.5A 0.2A 0.0A 0.5A 0.0A 0.0A 0.5A 0.2A 0.0A 0.5A 0.2A 0.0A 0.5A 0.3A 8.0A 4.0A 3.3A 2.0A 7.0A 3.0A 0.5A 7.0A 0.5A 0.5A 7.0A 3.0A 0.5A 7.0A 3.0A 0.5A 7.0A 2.0A 100mV 120mV 150mV 240mV 50mV 120mV 120mV 50mV 120mV 120mV 50mV 120mV 50mV 50mV 150mV 150mV 50mV 240mV 6.0A 3.0A 2.5A 1.5A 3.0A 2.0A 0.5A 4.0A 0.5A 0.5A 3.0A 2.0A 0.5A 3.0A 2.0A 0.5A 3.0A 1.0A 8.0A 4.0A 3.3A 2.0A 5.0A 2.0A 0.5A 6.0A 0.5A 0.5A 5.0A 2.0A 0.5A 5.0A 2.0A 0.5A 5.0A 1.0A +2 % +2 % +5 % +2 % +2 % +5 % +5 % +2 % +5 % +5 % +2 % +5 % +5 % +2 % +5 % +5 % +2 % +5 % (1) Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, peak total power must not exceed 60W. (2) Ripple & noise is measured at 20MHz bandwidth limit by using a 10 inch twisted wire terminated with a 10 µf capacitor in parallel 0.1 µf ceramic capacitor, it is also necessary to connect the primary and secondary ground holes together by jumper wire or by mounting screws to metal case under evaluation. (3) Total output power must not exceed 40W at convection cooling and 60W at 20CFM air flow condition. VDE LVD

ISO 9001 • BABT Facility Approvals ENTERPRISE CO., LTD. 16, Lane 530, Chung Cheng N. Rd. Sanchung City, Taipei Taiwan 24103, R.O.C. Phone: 886-2-988-2126 886-2-980-5255 Fax: 886-2-981-7086 886-2-983-3222 PHIHONGPHIHONGPHIHONGPHIHONGPHIHONG USA W ester n Of fice: 374 S. Milpitas Blvd. Milpitas, CA 95035 Phone: 408-946-7888 Fax: 408-946-8098 Email: usasales@phihongusa.com Internet: http://www.phihongusa.com Eastern Office:

3005 Brodhead Road

Bethlehem, PA 18017 Phone: (610) 866-9911 Fax: (610) 866-9920 Southwestern Office: 3325 Cochran St., Suite 200 Simi Valley, CA 93063 Phone: (805) 520-8177 Fax: (805) 520-3907 40W Universal Input Series40W Universal Input Series40W Universal Input Series40W Universal Input Series40W Universal Input Series PSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power SupplyPSA-4031 Series Switching Power Supply AC Input Voltage 90VAC-264VAC AC Frequency 47 to 63Hz AC Input Current 1.0A(rms) for 115VAC 0.5A(rms) for 230VAC DC Output See Chart Efficiency 70% typical at full load Hold-up Time 16msec. at full load, 115VAC input Overcurrent Protection All outputs equipped with auto- matic recovery current limiting circuit Overvoltage Protection 5.6V to 6.5V on main output CharacteristicsCharacteristicsCharacteristicsCharacteristicsCharacteristics Operation Temperature 0 to +40˚C full rated load Storage Temperature -25˚C to +85˚C Temperature Coefficient 0.04% per ˚C Insulation Resistance 50M ohm minimum MTBF Calculated Greater than 100,000 hours, full load, 25˚C (MIL-HDBK-217) EMI Meets conduction limits of FCC class B rules VDE 0871 class B Dimension DiagramDimension DiagramDimension DiagramDimension DiagramDimension Diagram Unit: mm (inch) Output Connections: V1 V2 V3 RETURN Single Pins 1,2,3 Pins 4,5,6 Triple Pins 2,3 Pin 1 Pin 6 Pins 4,5 CN1: Input: Molex 09-50-3031 or equivalent CN2: Molex 09-50-3061 or equivalent