PS4066 PERICOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • Low On-Resistance
  • On-Resistance Matching Between Channels, 0.2 W typ
  • On-Resistance Flatness, <2 W typ
  • Low Off-Channel Leakage, <100pA @ +25 oC
  • TTL/CMOS Logic Compatible
  • GND-to-V+ Analog Signal Dynamic Range
  • Low Power Consumption (<12 mW)
  • Low Crosstalk: -86dB @ 1MHz
  • Low Off-Isolation: -58dB @ 1 MHz
  • Wide Bandwidth: > 100 MHz
  • Small QSOP-16 Package Saves Board Area

Applications

  • Instrumentation, ATE
  • Sample-and-Holds
  • Audio Switching and Routing
  • Telecommunication Systems
  • PBX, PABX
  • Battery-Powered Systems N.C. = No Internal Connection Switches shown for logic “0” input

Description

The PS4066/PS4066A are improved SPST CMOS analog switches ideal for low-distortion audio switching. These high pre- cision, medium voltage switches were designed to operate with single-supplies from +3V to 16V . They are fully specified with +12V , +5V , and +3V supplies. The PS4066/PS4066A has four normally open (NO) switches. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rails. With +12V power supply, the PS4066/PS4066A guarantee <45W on-resistance. On-resistance matching between channels is within 2W (PS4066). On-resistance flatness is less than 4W (PS4066A) over the specified range. The PS4066A guarantees low leakage currents (<100pA @ 25oC, <6nA @ +85oC) and fast switching speeds (tON < 175ns). ESD sensitivity rating is >2,000V per MIL-STD 883, Method 3015.7 Both devices are available in PDIP-14, narrow-body SOIC-14, and QSOP-16 packages. Available temperature ranges are: com- mercial (0oC to 70oC), and industrial (-40oC to +85oC). For operation below 5V, the PI5A101/PI5A391/PI5A392 are also recommended. Top View Functional Diagrams, Pin Configurations, and Truth Table cigoLh ctiwS FFO NO Top View QSOPPDIP/SO PS4066/PS4066A Low-Cost, Quad, SPST, CMOS Analog Switches 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012

2 PS8184A 10/15/98

Low-Cost, Quad, SPST, CMOS Analog Switches Absolute Maximum Ratings Caution: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Electrical Specifications - Single +12V Supply (V+ = 12V ±10%, GND = 0V, VINH = 4V, VINL = 0.8V) retemaraPl obmyS snoitidnoC )C°(.pmeTn iM (1) pyT (2) xaM (1) stinU hctiwSgolanA langiSgolanA egnaR )3( V GOLANA lluF0 + V V ecnatsiseRnO R NO I,V21=+V MOC ,Am2= V ON V01= 522 15 4 W lluF5 5 hctaMecnatsiseR-nO slennahCneewteB )4( DR NO I,V21=+V MOC Am2= V ON V01= 6604SP A6604SP 52 5.0 5.0 lluF6 ecnatsiseR-nO ssentalF )5( R )NO(TALF I,V21=+V MOC ,Am2= V ON V1,V5,V01= 522 4 lluF6 ffOCNroON tnerruCegakaeL )6( I )FFO(ON OR I )FFO(CN V,V21=+V MOC ,V0= V ON V01= 6604SP A6604SP 52 1- 1.0- 1.0 An lluF6 -6 egakaeLffOMOC tnerruC )6( I )FFO(MOC V,V21=+V MOC ,V0= V ON V01= 6604SP A6604SP 52 1- 1.0- 1.0 lluF6 -6 egakaeLnOMOC tnerruC )6( I )NO(MOC V,V21=+V MOC ,V01= V ON V01= 6604SP A6604SP 52 2- 2.0- 2.0 lluF2 1-2 1 Thermal Information Continuous Power Dissipation (TA = +70ºC) Note Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to 30mA. Voltages Referenced to GND V or 30mA, whichever occurs first Peak Current, COM, NO, NC

3 PS8184A 10/15/98

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PS4066/PS4066A Low-Cost, Quad, SPST, CMOS Analog Switches retemaraPl obmySs noitidnoC) C°(pmeTn iM )1( pyT )2( xaM )1( stinU tupnIcigoL htiwtnerruCtupnI hgiHegatloVtupnI I HNI V8.0=srehtolla,V5=NI lluF 5.0-5 00.05 .0 mA htiwtnerruCtupnI woLegatloVtupnI I LNI V5=srehtolla,V8.0=NI5 .0-5 00.05 .0 cimanyD emiTnO-nruTt NO V MOC 2erugiF,V01= 525 40 01 sn lluF0 51 emiTffO-nruTt FFO 527 15 7 lluF0 01 lennahC-nO htdiwdnaB WB mbd0=langiS 05,4erugiF W tuodnani 001z HM noitcejnIegrahC )3( Q CL ,Fn1=V NEG R,V0= NEG 0= W , 3erugiF 20 1C p noitalosIffOR RIOR L 05= W C, L 4erugiF,zHM1=f,Fp5=8 5- Bd klatssorC )8( X KLAT RL 05= W C, L 5erugiF,zHM1=f,Fp5=6 8- ecnaticapaCONC )FFO( 6erugiF,zHM1=f9 FpffOMOC ecnaticapaC 6erugiF,zHM1=f9 nOMOC ecnaticapaC C )NO(MOC 7erugiF,zHM1=f2 2 ylppuS ylppuSevitisoP tnerruC +I V NI ,+VroV0= fforonoslennahclla lluF 1-1 00.01 mA cinomraHlatoT noitrotsiD DHT 30.0% Electrical Specifications - Single +12V Supply (continued) (V+ = 12V ±10%, GND = 0V, VINH = 4V, VINL = 0.8V) Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design 4. DR ON = DR ON max - DR ON min 5. Flatness is defined as the difference between the maximum and minimum value of on-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC. 7. Off Isolation = 20log 10 [ VCOM / (VNO or VNO ) ], VCOM = 0utput, VNC /VNO = input to off switch 8. Between any two switches.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012

4 PS8184A 10/15/98

Low-Cost, Quad, SPST, CMOS Analog Switches Electrical Specifications - Single +5V Supply (V+ = +5V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) retemaraPl obmySs noitidnoC) C°(pmeTn iM )1( pyT )2( xaM )1( stinU hctiwSgolanA egnaRlangiSgolanA )3( V GOLANA lluF0 + VV ecnatsiseR-nOR NO I,V5.4=+V MOC ,Am1-= V ON V5.3= 522 25 7 W lluF0 01 ecnatsiseR-nO slennahCneewteBhctaM )4( DR NO I,V5=+V MOC ,Am1-= V ON V3= 523 .04 lluF2 1 ssentalFecnatsiseR-nO )5,3( R )NO(TALF I,V5=+V MOC ,Am1-= V ON V3,V1= 524 6 lluF8 egakaeLffOON tnerruC )9( I )FFO(ON V,V5.5=+V MOC ,V0= V ON V5.4= 6604SP A6604SP 52 1- 1.0- 1.0 An lluF6 -6 egakaeLffOMOC nerruC )9( I )FFO(MOC V,V5.5=+V MOC ,V0= V ON V5.4= 6604SP A6604SP 52 1- 1.0- 1.0 lluF6 -6 egakaeLnOMOC tnerruC )6( I )NO(MOC V,V5.5=+V MOC V5= V ON V5.4= 6604SP A6604SP 52 2- 2.0- 2.0 lluF2 1-2 1 cimanyD emiTnO-nruTt NO V ON V3= 525 65 21 sn lluF5 71 emiTffO-nruTt FFO 520 35 7 lluF5 21 htdiwdnaBlennahC-nOW B 05,mBd0=langiS W tuodnani 4erugiF 520 01M H z noitcejnIegrahC )3( Q CL V,Fn1= NEG ,V0= R NEG = 3erugiF,V0 521 0 1C p ylppuS tnerruCylppuSevitisoP+ I V,V5.5=+V NI ,+VroV0= fforonoslennahclla lluF1 -1 mA

5 PS8184A 10/15/98

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PS4066/PS4066A Low-Cost, Quad, SPST, CMOS Analog Switches Electrical Specifications - Single +3V Supply (V+ = +2.7V to 3.3V, GND = 0V, VINH = 2.4V, VINL = 0.8V) retemaraPl obmySs noitidnoCC °pmeT. niM )1( pyT )2( .xaM )1( stinU hctiwSgolanA egnaRlangiSgolanA )3( V GOLANA 0+ VV ecnatsiseR-nOlennahCR NO I,V3=+V MOC ,Am1-= V ON V5.1= 520 71 W lluF5 22 cimanyD emiT-nO-nruT )3( t NO V,V3=+V ON V5.1= 520 85 81 sn lluF0 32 emiT-ffO-nruT )3( t )FFO( V,V3=+V ON V5.1= 520 40 51 lluF0 02 noitcejnIegrahC )3( Q CL V,Fn1= NEG ,V0= R NEG V0= 522 0 1C p ylppuS tnerruCylppuSevitisoP+ I V,V3.3=+V NI ,+VroV0= fforonoslennahclla lluF1 -1 00.01 mA Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design 4. DR ON = DR ON max - DR ON min 5. Flatness is defined as the difference between the maximum and minimum value of on-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC. 7. Off Isolation = 20log 10 [ VCOM / (VNO or VNO ) ], VCOM = 0utput, VNC /VNO = input to off switch 8. Between any two switches.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012

6 PS8184A 10/15/98

Low-Cost, Quad, SPST, CMOS Analog Switches Typical Operating Characteristics (TA = +25°C, unless otherwise noted) RON vs. VCOM & TemperatureRON vs. VCOM & Supply Voltages Charge Injection vs. Analog Voltage Leakage Currents vs. VCOM

7 PS8184A 10/15/98

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PS4066/PS4066A Low-Cost, Quad, SPST, CMOS Analog Switches Typical Operating Characteristics (TA = +25°C, unless otherwise noted) Leakage Current Input Switching Threshold vs. Supply Voltage V + (V)Temperature (°C) VIN (V) Leakage Current vs. Temperature I+ (mA) Supply Current vs. VIN V + (V) TON,TOFF(ns) VIN (V) Starting Times (ns) Temperature (°C) Switching Current vs. Switching Frequency Switching Times vs. Temperature Supply Currents vs. Switching Frequency I + (mA) Frequency (MHz)

8 PS8184A 10/15/98

characteristics are unaffected. Figure 1. Overvoltage protection is accomplished using an exter- nal blocking diode or a current limiting resistor . Figure 3. Charge Injection Figure 2. Switching Times

9 PS8184A 10/15/98

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PS4066/PS4066A Low-Cost, Quad, SPST, CMOS Analog Switches Test Circuits/Timing Diagrams (continued) Figure 4. Off Isolation, BW Figure 6. Channel-Off Capacitance Figure 5. Crosstalk Figure 7. Channel-On Capacitance

Ordering Information

rebmuNtraPe gnaR-erutarepmeTe gakcaP DPC6604SPC ”07+otC”0P IDcitsalP41 DSC6604SPC ”07+otC”0O SworraN41 6604SPE ECC ”07+otC”0P OSQ61 604SP6 D PEC ”58+otC”04-P IDcitsalP41 DSE6604SPC ”58+otC”04-O SworraN41 DPCA6604SPC ”07+otC”0P IDcitsalP41 DSCA6604SPC ”07+otC”0O SworraN41 EECA6604SPC ”07+otC”0P OSQ61 DPEA6604SPC ”58+otC”04-P IDcitsalP41 DSEA6604SPC ”58+otC”04-O SworraN41 EEEA6604SPC ”58+otC”04-P OSQ61 Pericom Semiconductor Corporation 2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax (408) 435-1100 • http://www.pericom.com +12V Capacitance Meter GND NO COM 10nF IN 0V f = 1kHz