SK6-076C04 APP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Sealed Power For Environmental Connections SPEC Pak Marine | Wind Power | Lighting | Transportation | Pumps | Ground Support Machine Tool | Industrial Automation | Motor | Solar Power | Harsh Environments
(IP68) Plugs and Receptacles The SPEC Pak® Mid Power is rugged and environmentally sealed (IP68). It leverages APP’s core Powerpole® flat wiping contact technology, offering power handling capabilities up to 80 amps at 600 volts with signal. The SPEC Pak® Mid Power shells are highly configurable. They accept up to four Powerpole® 75 (PP75) contacts and housings. They also accept up to 8 pin and socket auxiliary contacts providing the user signal and/or sequencing op- tions. Assembly is made easy though the use of colored Powerpole ® housings which can be matched to wire colors. They will accept wire sizes ranging from 12 to 6 AWG [3.3 to 13.3 mm²]. SPEC Pak® Mid Power is highly configurable providing users with a multitude of flexible design solutions in a single interconnect. 1 - Chemical & UV Resistant Ruggedized Shells
- Wire to Wire Configurations
- Wire to Panel Configurations 2 - Auxiliary Contacts for Signal and/or Sequencing (up to 8) 3 - Power Contacts (up to 4) 4 - Sealing Gland to Ensures (IP68) Environmental Seal 5 - Color Coded Powerpole® Housings to Match Wire Colors 6 - Stainless Steel Latches to Prevent Accidental Unmating 7 - IP68 Panel Mount Receptacle Gasket 8 - Sealing O-Ring Ensures (IP68) Environmental Seal 1 2 Top of the latch is not visible from this view. Auxiliary contacts are not visible in the cut-a-way view.
SPEC Pak® Shell Powerpole® Power Auxiliary Contacts [1] Contacts & Housings (PowerMod® Series) Electrical Current Rating (Amperes) UL 1977 - 80 [2] 5 CSA (30° C Rise) - 50 [2] 5 V oltage Rating UL 1977 (AC/DC) - 600 600 Dielectric Withstanding (AC) - 3,000 - Contact Resistance Milliohms (average) - 0.200 [3] 2.000 [4] Hot Plug Amp Rating (UL 1977)
250 Cycles at 120V - 50 [5]
Submersion (UL 50E) Pass - - Wire Size - 12 to 6 AWG 24 to 12 AWG - 3.3 to 13.3 mm² 0.50 to 2.5 mm² Operating Temperature -40° to 105° C -20° to 105° C -40° to 105° C -40° to 221° F -4° to 221° F -40° to 221° F Mating Cycles (no load) Silver Plated Contacts - 1,500 - Gold Plated Contacts - - 1,500 Contact Retention Force - > 50 lbf / 222 N - Insertion Force - 28 lbf Touch Safe (IEC 60529) - IP10 - Drop Test (UL50E) Pass - - Panel Break Off (EIA 394-97) Pass - - Crush Test (EIA 364-40B) Pass - - Materials Shell / Housing PC/PBT PC PC/PBT Powerpole® Holder PC/PBT - - Latch Stainless Steel - - Flammability (UL 94) V0 V0 V0 Weatherability (UL 764C) F1 F1 F1 Contacts Base - Copper Alloy Copper Alloy Plating - Silver Gold over Nickel NOTES: 1. Integral signal holders that holds up to 8 pins and 8 sockets. 2. Based on 6 AWG. 3. Based on 6 AWG 1-1/4” distance between probes. 4. Based on 20 AWG. 5. Hot Plug testing completed using individual Powerpole® housings and contacts, not installed in SPEC Pak® shells. For other industry tests and/or agency approvals, contact customer service.
SPEC Pak® is a highly configurable environmentally sealed connector, that can be purchased as components in bulk for volume production, or pre-packaged as a kit. For convenience, follow the steps below to determine component or kit part numbers. Step 1: Select Shell * Select Shell Style, from page 6. Product Selection Guide | KIT PART NUMBER GUIDE (FOR KITTED CONNECTOR PURCHASE) | Step 1 - (see page 6) List Component Part Numbers Here: List Kit Part Number Here: SPEC Pak® Series Shell Color Shell Style Shell Size Insert Arrangment (Select One) Dash S K 1 = Inline Receptacle - 076 C04 2 = Panel Mount Receptacle 6 = Straight Plug 9 = Receptacle Cover 9P = Plug Cover SK2-076C04 Panel Mount Receptacle | COMPONENT PART NUMBER GUIDE (FOR COMPONENT BULK PURCHASE) | Step 2: Select Wire Protection * Define: Number of Wires Wire OD Wires * Select wire protection that will accommodate the number of wires and outer diameter (OD) of the wire used in your application, from page 6. * Wire protection is required for use with inline receptacles and plugs to obtain IP68 seal. Receptacle Kit Part Number: Plug Kit Part Number: SK6-076C04 SK1-076C04 Plug Inline Receptacle
Step 2 - (see page 6) 0 = Custom Configuration 70 = 1307 Contact for #6 AWG (13.3 mm²) 71 = Please inquire for #8 AWG (8.4 mm²) 72 = 5953 Contact for #10/12 AWG (3.3 to 5.3 mm²) 00 = None 01 - 99 = Various Gland Types Step 3 - (see page 7) Step 4 - (see page 7) Custom Number of Holes Cable Sealing Range (Select Two) Dash (Select One) (Select One) Dash 00 = None - 0 = Custom Configuration - Contact the factory PS = Plastic Single-hole A = AC Single Phase Custom Configuration PM = Plastic Multi-hole B = AC 3 Phase, 3 Wire C = DC Circuit, 4 Wire Z = All Black NOTE: Panel Mount Receptacle is always “00 00”. Power Contact List Component Part Numbers Here: Pin Auxiliary Contact Socket Auxiliary Contact Step 4: Select Contacts * Define: Number of Circuits Wire Gauge Contacts Amps (continuous): ____ Max amps at ____ volts * Select power and/or auxiliary contacts appropriate for your wire size (AWG or mm²), from page 7. Step 3: Select Housing Arrangement * Define: Number of Number of Wires Auxiliaries Housing Arrangement * Select housing arrangement colors appropriate for your AC or DC application, from page 7. (See Page 6)
(UL 1977) -40° to 105° C -40° to 221° F Thread Type Integrated into inline receptacle & plug shells Torque Requirements Hand tighten. Using a 44 mm wrench or strap wrench, tighten an additional 3/4 - 1 turn. Material Shell PBT/PC Sealing Grommet EPDM Flammability (UL 94) V0 Weatherability (UL 764C) F1 Color Black | WIRE PROTECTION - CABLE GLAND | NOTE: Mounting Hardware (4 each M4 or #8 screws) not included. Recommended torque for mounting hardware is 7-10 in-lbs. Part Number & Description SK2-076C04 - Panel mount receptacle shell - Powerpole® holder - receptacle - Panel mount receptacle gasket - Powerpole® holder retaining screws M3.5 x 15mm Component Replacement Parts Part Number Description 115129P1 Panel Mount Receptacle Gasket H1120P53 Powerpole holder retaining screws M3.5 x 15mm PANEL MOUNT RECEPTACLE KIT INLINE RECEPTACLE KIT Part Number & Description SK9-076 Receptacle Cover Kit - Cover (IP68) with lanyard SK9P-076 Plug Cover Kit - Cover (IP68) with lanyard Plug Cover with Interfacial seal Receptacle Cover
Ordering Information
Powerpole® HolderHolder Retaining Screws Inline Receptacle Shell Receptacle Powerpole® Holder Holder Retaining Screws Sealing Nut Part Number & Description SK6-076C04 - Plug shell - Powerpole® holder - plug - Powerpole® holder retaining screws M3.5 x 15mm - Sealing Gland Nut (Sealing grommet sold separately) Part Number & Description SK1-076C04 - Inline receptacle shell - Powerpole® holder - receptacle - Powerpole® holder retaining screws M3.5 x 15mm - Sealing Gland Nut (Sealing grommet sold separately) Plug Shell Housing with Latches Plug Powerpole® Holder Holder Retaining Screws Sealing Nut Straight Plastic Single & Multi Hole Cable Gland For use with SK1-076C04 & SK6-076C04 For use with shell kit compo- nents purchased in bulk. Sealing Glands Number Cable Range Wire Wrench Size Protection Sealing Grommet Only (includes sealing grommet & wire protection nut) 1 18.0 - 24.0 mm (0.79” - 0.85”) 44 PS 01 B02130P7 PS1T40-24X 2 3.8 - 5.0mm (0.15” - 0.20”) 44 PM 21 B02130P12 PS2T40-5X 2 6.0 - 7.2mm (0.24” - 0.28”) 44 PM 22 B02130P11 PS2T40-7X 2 7.0 - 9.0mm (0.28” - 0.35”) 44 PM 23 B02130P10 PS2T40-9X 3 6.0 - 7.2mm (0.24” - 0.28”) 44 PM 32 B02130P5 PS3T40-7X 3 7.0 - 9.0mm (0.28” - 0.35”) 44 PM 33 B02130P4 PS3T40-9X 4 3.8 - 5.0mm (0.15” - 0.20”) 44 PM 41 B02130P3 PS4T40-5X 4 6.0 - 7.2mm (0.24” - 0.28”) 44 PM 42 B02130P2 PS4T40-7X 4 7.0 - 9.0mm (0.28” - 0.35”) 44 PM 43 B02130P1 PS4T40-9X Wire Protection
Mid Power SPEC Pak® Four Power Contacts / Eight Signal Contacts 5A Temperature (°C) Amperes Applied
6 AWG 8 AWG
10 AWG 12 AWG
| TEMPERATURE CHART | Configured with up to 4 PP75 Contacts - Up to 80 Amps 5916G4 5916G5 E5916G6 5916G4 5916G5 5916G7 5916G4 Custom Configuration AC Single Phase AC 3 Phase, 3 Wire DC 2 Circuit, 4 Wire All Black A C B Z 5916G7 5916G4 5916G7 5916G4 5916G4 5916G4 5916G4 E | Standard Housing Arrangements | 1309G4 1387G1 1388G6 1389G6 1309G4 1387G1 1388G7 1389G6 Hand Pneumatic Tool Tool Die Locator For use with 6 AWG E = Empty TP0001 TL0001 TP0002 TL0002 Pnuematic Tool Locator TM0001 TL0001 TM0001 TL0002 Hand Tool Locator Hand Tool PM1000G1 PM1000G1 For use with pins For use with sockets Spacer & Keying Accessory Red, Short 1399G23-BK 1399G23 Red, Long 1399G21-BK 1399G21 Short Long PP75 Standard Power Contacts, Signal Contacts & Housings Red 5916G7-BK 5916G7 Green 5916G6-BK 5916G6 Black 5916G4-BK 5916G4 White 5916G5-BK 5916G5 Blue 5916-BK 5916 Yellow 5916G15-BK 5916G15 Orange 5916G14-BK 5916G14 Gray 5916G16-BK 5916G16 PP75 Silver Plated Wire Contacts Mating Contact Code Type AWG mm² Force -- Part Numbers -- Designation Individual 6 13.3 Low 1307-BK 1307 70 Individual 8 8.4 Low Please inquire 71 Individual 12 to 10 3.3 to 5.3 Low 5953-BK 5953 72 Auxiliary Contacts (PowerMod® series) Type AWG mm² ---- Part Number --- Standard Length 7.7mm Pin 24 to 20 0.50 to 0.75 PM16P2024S30 PM16P2024S30-50 Pin 20 to 18 0.75 to 1.00 PM16P1620S30 PM16P1620S30-50 Pin 16 to 14 1.00 to 1.5 PM16P1416S30 PM16P1416S30-50 Pin 12 2.50 PM16P12S30 PM16P12S30-50 Pre-Mate 9.3mm Pin 24 to 20 0.50 to 0.75 PM16P2024A30 PM16P2024A30-50 Pin 20 to 18 0.75 to 1.00 PM16P1620A30 PM16P1620A30-50 Pin 16 to 14 1.00 to 1.5 PM16P1416A30 PM16P1416A30-50 Pin 12 2.50 PM16P12A30 PM16P12A30-50 Post-Mate 6.4mm Pin 24 to 20 0.50 to 0.75 PM16P2024C30 PM16P2024C30-50 Pin 20 to 18 0.75 to 1.00 PM16P1620C30 PM16P1620C30-50 Pin 16 to 14 1.00 to 1.5 PM16P1416C30 PM16P1416C30-50 Pin 12 2.50 PM16P12C30 PM16P12C30-50 Socket 24 to 20 0.25 to 0.50 PM16S2024S32 PM16S2024S32-50 Socket 20 to 16 0.50 to 1.30 PM16S1620S32 PM16S1620S32-50 Socket 16 to 14 1.30 to 2.10 PM16S1416S32 PM16S1416S32-50 Socket 12 2.5 PM16S12S32 PM16S12S32-50
Top View Front View Side View Mated View Panel Cut Out Front View Side View Mated View Top View Front View Side View Mated View Front View Side View Front View Side View Dimensions | PLUG MID POWER FOR PP75 HOUSINGS | | PANEL MOUNT RECEPTACLE MID-POWER FOR PP75 | | INLINE RECEPTACLE MID-POWER FOR PP75 | | PLUG COVER KIT | | RECEPTACLE COVER KIT | HEADQUARTERS: Anderson Power Products®, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-0128 • EUROPE: Anderson Power Products® Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203 • ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 • CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 • www.andersonpower.com • [ 1.10 ] 28.0 [ 3.03 ] 77.0 [ 2.52 ] 63.9 [ 1.40 ] 35.5 [ 2.79 ] 70.8 [ 2.47 ] 62.8 [ 3.73 ] 94.7 [ 2.97 ] 75.5 [ 2.47 ] 62.8 [ 3.09 ] 99.0 [ 4.4 ] 111.0 Mated Length to Panel Receptacle [ 3.19 ] 81.0 [ 3.19 ] 81.0 [ 4.4 ] 111.0 Mated Length to Panel Receptacle [ 2.83 ] 71.8 [ 2.70 ] 68.6 [ 3.76 ] 95.5 [ 3.9 ] 100.0 [ 6.9 ] 175.0 Mated Length to Plug [ 1.31 ] 33.2 [ 0.98 ] 25.0 [ 2.36 ] 60.0 [ 2.36 ] 60.0 © 2017 Anderson Power Products, Inc. All rights reserved. APP®, Anderson Power Products®, A®, SPEC Pak®, Powerpole® and the APP Logo are registered trademarks of Anderson Power Products, Inc. All Data Subject To Change Without Notice 2024-0103 DS-MPSP AK REV 4