PS07J PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

  1. Product profile

1.1 General description

General purpose rectifier diodes in a cavity free cylindrical glass surface mounted package using Implotec™ technology.

1.2 Features

1.3 Applications

1.4 Quick reference data

  1. Pinning information PS07 series General purpose rectifiers Rev. 02 — 26 July 2004 Product data sheet ■ Low leakage current ■ Glass passivated ■ Hermetically sealed package ■ Small package. ■ Low frequency general purpose rectification ■ Bridge rectifiers. ■ VR ≤ 600 V (PS07J) ■ VF ≤ 1.1 V ■ VR ≤ 400 V (PS07G) ■ IF(AV)≤ 1.8 A ■ VR ≤ 200 V (PS07D) ■ trr=3 µs (typ). Table 1: Discrete pinning Pin Description Simplified outline Symbol a anode (a) k cathode (k) k SOD87 a a 001aaa020 k

9397 750 13203 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 2 of 9 Philips Semiconductors PS07 series General purpose rectifiers 3. Ordering information 4. Limiting values Table 2: Ordering information Type number Package Name Description Version PS07D SOD87 Hermetically sealed glass surface mounted package; Implotec™ technology; 2 connectors SOD87 PS07G PS07J Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VRRM repetitive peak reverse voltage PS07D - 200 V PS07G - 400 V PS07J - 600 V VRWM crest working reverse voltage PS07D - 200 V PS07G - 400 V PS07J - 600 V VR reverse voltage PS07D - 200 V PS07G - 400 V PS07J - 600 V IF(AV) average forward current T tp=7 5°C; Figure1 averaged over any 20 ms period - 1.8 A Tamb =6 5°C; Figure2 mounted on a printed-circuit board; averaged over any 20 ms period - 0.6 A I FSM non-repetitive peak forward current tp = 8.3 ms half sine wave; Tj=2 5°C prior to surge -2 5 A Tstg storage temperature −65 +150 °C Tj junction temperature −65 +150 °C

9397 750 13203 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 3 of 9 Philips Semiconductors PS07 series General purpose rectifiers 5. Thermal characteristics a = 1.42; VR =V RRM(max) ;δ = 0.5 a = 1.42; V R =V RRM(max) ;δ = 0.5 Device mounted as shown inFigure6 Fig 1. Average forward current as a function of tie-point temperature (including losses due to reverse leakage); maximum values. Fig 2. Average forward current as a function of ambient temperature (including losses due to reverse leakage); maximum values. 003aaa634 0 40 80 120 160 Ttp (°C) IF(AV) (A) 003aaa635 0.2 0.4 0.6 0.8 0 40 80 120 160 IF(AV) (A) Tamb (°C) Table 4: Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-tp) thermal resistance from junction to tie-point - 30 - K/W R th(j-a) thermal resistance from junction to ambient mounted on a printed-circuit board, 1.5 mm thick; copper thickness≥ 40µm; Figure6 - 150 - K/W

9397 750 13203 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 4 of 9 Philips Semiconductors PS07 series General purpose rectifiers 6. Characteristics Table 5: Characteristics Tj=2 5°C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Static characteristics V F forward voltage I F =1A ;Figure3 Tj=2 5°C - - 1.1 V Tj= 150°C - - 0.95 V IR reverse current V R =V RRM ;Figure4 Tj=2 5°C --1 0 µA Tj= 125°C --5 0 µA Dynamic characteristics C d diode capacitance f = 1 MHz; V R =4V ;Figure5 - 8.5 - pF trr reverse recovery time switching from I F = 0.5 A to IR =1A ; measured at IR = 0.25 A;Figure7 -3 - µs Tj=2 5°CT j=2 5°C Fig 3. Forward current as a function of forward voltage; maximum values. Fig 4. Reverse current as a function of junction temperature; maximum values. 003aaa636 01 2 3VF (V) IF (A) 150 °C Tj = 25 °C 103 003aaa620 16012040 80 (µA) IR Tj (°C) 102

9397 750 13203 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 5 of 9 Philips Semiconductors PS07 series General purpose rectifiers f = 1 MHz; Tj=2 5 °C Fig 5. Diode capacitance as a function of reverse voltage; typical values. Fig 6. Printed-circuit board for surface mounting. Tj=2 5°C Fig 7. Test circuit and reverse recovery time waveform definition. mgc740 10 10 2 103 102 C d (pF) VR (V) msb213 4.5 2.5 1.25 Dimensions in mm 10 W 1 W 50 W 25 V DUT mam057 trr 0.5 0.5 1.0 IF (A) IR (A) t 0.25

9397 750 13203 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 6 of 9 Philips Semiconductors PS07 series General purpose rectifiers 7. Package outline Fig 8. SOD87 package outline. REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOD87 100H03 99-06-04 04-06-28 Hermetically sealed glass surface mounted package; Implotec TM(1) technology; 2 connectors SOD87 UNIT D mm 2.1 2.0 2.0 1.8 3.7 3.3 0.3 D1 H L DIMENSIONS (mm are the original dimensions) H DD 1 LL (2) 0 1 2 mm scale Notes 1. Implotec is a trademark of Koninklijke Philips Electronics N.V. 2. The marking indicates the cathode. ka

9397 750 13203 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 7 of 9 Philips Semiconductors PS07 series General purpose rectifiers 8. Revision history Table 6: Revision history Document ID Release date Data sheet status Change notice Document number Supersedes PS07_SERIES_2 20040726 Product data sheet - 9397 750 13203 PS07_SERIES_1 Modifications: • IF(AV) data and conditions revised inSection 1.4 “Quick reference data” andTable 3 “Limiting values”

  • Figure1 2 and 3 updated
  • Tstg and Tj data revised inTable 3 “Limiting values”
  • VF data and conditions revised inTable 5 “Characteristics” PS07_SERIES_1 20040203 Product data sheet - 9397 750 12711 -

Philips Semiconductors PS07 series General purpose rectifiers 9397 750 13203 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 8 of 9 9. Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. Definitions Short-form specification —The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 11. Disclaimers Life support —These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes —Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 12. Trademarks Implotec —is a trademark of Koninklijke Philips Electronics N.V. 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com Level Data sheet status[1] Product status[2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).

© Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 26 July 2004 Document order number: 9397 750 13203 Published in The Netherlands Philips Semiconductors PS07 series General purpose rectifiers 14. Contents