PRTR5V0U4Y NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. use http://www.nexperia.com salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: reserved Should be replaced with: - © Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e -mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia
- Product profile
1.1 General description
The PRTR5V0U4Y is designed to protect Input/Output (I/O) ports that are sensitive to capacitive load, such as USB 2.0, Ethernet and DVI from destruction by ElectroStatic Discharge (ESD). It provides protection to downstream signal and supply components from ESD voltages as high as±8 kV (contact discharge). The PRTR5V0U4Y incorporates four pairs of ultra-low capacitance rail-to-rail diodes plus a Zener diode. The rail-to-rail diodes are connected to the Zener diode which allows ESD protection to be independent of supply voltage. The PRTR5V0U4Y is fabricated using thin film-on-silicon technology integrating four ultra-low capacitance rail-to-rail ESD protection diodes in a miniature 6-lead SOT363 package.
1.2 Features
n Pb-free and RoHS compliant n ESD protection compliant to IEC 61000-4-2 level 4,±8 kV contact discharge n Four ultra-low input capacitance (1 pF typical) rail-to-rail ESD protection diodes n Low-voltage clamping due to integrated Zener diode n Small 6-lead SOT363 package
1.3 Applications
n General-purpose downstream ESD protection high frequency analog signals and high-speed serial data transmission for ports inside: u Cellular and PCS mobile handsets u PC-/notebook USB 2.0/IEEE 1394 ports u DVI/HDMI interfaces u Cordless telephones u Wireless data (WAN/LAN) systems u PDAs PRTR5V0U4Y Integrated quad ultra-low capacitance ESD protection Rev. 01 — 8 May 2008 Product data sheet
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved.
- Recommended operating conditions
Table 1. Pinning
1 ESD protection I/O 1
3 ESD protection I/O 2
4 ESD protection I/O 3
6 ESD protection I/O 4
Table 2. Ordering information Table 3. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 4. Operating conditions
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved.
7.1 IEEE 1394a/b protection
IEEE 1394 connector ports against ESD. Table 5. Characteristics Tamb =2 5°C unless otherwise specified.
56 W56 W
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 8 May 2008 4 of 10 NXP Semiconductors PRTR5V0U4Y Integrated quad ultra-low capacitance ESD protection 7.2 Universal serial bus 2.0 protection The PRTR5V0U4Y is optimized to protect USB 2.0 ports with or without OTG functionality against ESD.
7.3 Universal SIM-card protection
The PRTR5V0U4Y protects the SIM-card interfaces against ESD. The device is capable of protecting the USB data lines as well as VBUS supply and the ID pin. Fig 2. Typical application for USB OTG ESD protection 001aag051 VBUS DAT+ USB OTG RECEPTACLE CARKIT DAT - ID GND Shld GND mini B receptacle mini A receptacle to phone This device also protects VCC . Fig 3. Typical application for universal SIM-card ESD protection 001aag052 I/O CLOCK RESET V CC GND SIM
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 8 May 2008 5 of 10 NXP Semiconductors PRTR5V0U4Y Integrated quad ultra-low capacitance ESD protection
7.4 Gigabit Ethernet transceiver protection
The PRTR5V0U4Y protects the gigabit Ethernet transceiver against ESD. Fig 4. Typical application for gigabit Ethernet transceiver ESD protection 001aag053 TPOPD TPOND TPOPC TPONC GIGABIT ETHERNET TRANSCEIVER QUAD TRANSFORMER RJ45 TPOPB TPONB TPOPA TPONA
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 8 May 2008 6 of 10 NXP Semiconductors PRTR5V0U4Y Integrated quad ultra-low capacitance ESD protection
7.5 Universal microSD/TransFlash and SD-memory card protection
The PRTR5V0U4Y protects each data line of the microSD/TransFlash device against ESD. Fig 5. Typical application for universal microSD/TransFlash and SD-memory card ESD protection 001aag054 DAT3/CD CMD CLK V CC GND TRANSFLASH DAT2 DAT1 DAT0
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 8 May 2008 7 of 10 NXP Semiconductors PRTR5V0U4Y Integrated quad ultra-low capacitance ESD protection 8. Package outline Fig 6. Package outline SOT363 (SC-88) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT363 SC-88 wB Mbp D e pin 1 index A Lp Q detail X H E E v M A AB y 0 1 2 mm scale c X 13 2 456 Plastic surface-mounted package; 6 leads SOT363 UNIT A 1 max bp cD E e1 H E Lp Qy wv mm 0.1 0.30 0.20 2.2 1.8 0.25 0.10 1.35 1.15 0.65 e 1.3 2.2 2.0 0.2 0.10.2 DIMENSIONS (mm are the original dimensions) 0.45 0.15 0.25 0.15 A 1.1 0.8 04-11-08 06-03-16
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved. Table 6. Abbreviations Table 7. Revision history
PRTR5V0U4Y_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 8 May 2008 9 of 10 NXP Semiconductors PRTR5V0U4Y Integrated quad ultra-low capacitance ESD protection 11. Legal information
11.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
11.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
NXP Semiconductors PRTR5V0U4Y Integrated quad ultra-low capacitance ESD protection © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 8 May 2008 Document identifier: PRTR5V0U4Y_1 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 13. Contents