PRO-LORAT1-8S10 RFSOLUTIONS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Timer WatchDog Mode PairPower Tx Rx 50% 100% 10% Digital Input 1 Digital Input 2 Relay Output 1 Relay Output 2 Signal Strength Outputs Changeover Contacts 12V 10A 230V 5A Inputs Unused in PRO systems Power Supply 9-32V AC or DC Received signal strength LED’s WatchDog Press to initiate Watchdog Transmissions (also used for range test) Antenna Connect Additional Modules Here Pair Press once to auto sync. See Advanced operation for other pairing and erase options. Mode select power output and Operating Mode. Timer sets ouput timers see Timer settings for more details NO COM NC NO COM NCNO COM Watchdog Relay Output PRO-LORA Overview PRO-LORA-TXn: Volt free inputs PRO-LORA-RXn: Volt free outputs
50% 100% 10% Strength 1 2 NO COM NC NO COM NCWATCHDOG Timer WatchDog Mode Pair Power Tx Rx 50% 100% 10% Strength 1 2 NO COM NC NO COM NCWATCHDOG Timer WatchDog Mode Pair
Changeover Relay Contact Outputs Output 2 Output 3 Output 4 Optional Power in 9-32V ac or dc - +NO COM NCNO COM NCNO COM NCNO COM NC Address Power Input 1 Input 2 Input 3 Input 4 Connect to Further Add on Modules Connect to Further Add on Modules Connect Volt Free Close Contacts Here Address
50% 100% 10% Strength 1 2 NO COM NC NO COM NCWATCHDOG Timer WatchDog Mode Pair LED Timer Output 8 60 min 7 30 min 6 10 min 5 1 min 4 30 sec 3 10 sec 2 5 sec 1 1/2 sec
0 Mom
50% 100% 10% Strength 1 2 NO COM NC NO COM NCWATCHDOG Timer WatchDog Mode Pair
50% 100% 10% Power Tx Rx 50% 100% 10% A B NO COM NC NO COM NC NO COM NC NO COM NC Strength WATCHDOG Timer WatchDog Mode Pair Strength WATCHDOG Timer WatchDog Mode Pair
Notes The power is derived directly from PRO-LORA 2. The relay contacts in this unit are for functional use only and must not be used for isolation purposes
RF Solutions Ltd. Recycling Notice Meets the following EC Directives: DO NOT Discard with normal waste, please recycle. ROHS Directive 2002/95/EC Specifies certain limits for hazardous substances. WEEE Directive 2002/96/EC Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions Ltd., fulfills its WEEE obligations by membership of an approved compliance scheme. Waste Batteries and Accumulators Directive 2006/66/EC Where batteries are fitted, before recycling the product, the batteries must be removed and disposed of at a licensed collection point. Environment Agency producer registration number: WEE/JB0104WV.