210-458FR | DigiCamel IC Datasheet

Online Datasheet

Read 210-458FR online.

200-433FR RFSOLUTIONS | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 11

Technical content

Simple to Use Remote Control
8 Channels per Transmitter
16 Channels per Receiver
Upto 48 Transmitters per system
Auto Transmit Mode
Secure RF Protocol
Automatic ‘Watchdog’ Transmission
Range: ¾ Upto 200 metres at 433MHz ¾ Upto 1,000 metres at 433MHz Narrow Band. ¾ Upto 6,000 metres at 458MHz
Requires no radio license
Relay Outputs upto 30A @ 230Vac
All Modules supplied with Antenna Remote Telemetry Systems are well suited to industrial switching applications where telemetry signals need to be sent remotely from one location to another. This system allows multiple transmitters to a single receiver or a single transmitter to multiple receivers. Each Transmitter module accepts upto 8 pairs of ‘Volt Free’ contacts as inputs via screw terminals. Each Receiver has 16 outputs arranged as 4 x 4 easy plug in connectors to interface to any combination of output modules. Any of the output modules connect directly to the receiver (cable supplied) to provide transistor switching or relay outputs.

8 Input Channels
Volt Free contact Inputs via Screw Terminals
12 / 24Vdc Supply
Low Power Battery Version

200 Transmitter: Standard transmitter

201 Transmitter: Low Power Transmitter . (Desi gned for battery powered applications) Part Number Description Range** (Metres) Freq (MHz) Compatible Decoders 200-433FR FM Transmitter 200 433.92 210-433F 200-525NR FM Narrow Band Transmitter 1,000 434.525 210-525N 200-458FR FM High Power Transmitter 6,000 458.850 210-458F 201-525NR FM Narrow Band Transmitter 1,000 434.525 210- 525N 201-458FR FM High Power Transmitter 6,000 458.850 210-458F Receivers

16 Output Channels
Volt Free contact Inputs via Screw Terminals
12 / 24Vdc Supply
Low Power Battery Version Part Number Description Range** (Metres) Freq (MHz) Compatible Transmitter 210-433FR FM Receiver 200 433.92 200/201-433F 210-525NR FM Narrow Band Receiver 1,000 434.525 200/201-525N 210-458FR FM High Power REceiver 6,000 458.850 200/201-458F Output Modules
Connect Directly to 210 Rx (Cable Supplied)
no power connections required Part Number Description No of Outputs Max Switching (per output) 211 Darlington Driver Outputs 16 0.5A @ 50V (Overall total 1A)

215 Relay Module 8 5A @230Vac

216 Relay Module 4 5A @230Vac

230 Relays Module 4 30A @230Vac

IP56 Insulation Class 2
DIN Rails mounted on Steel Plate
12Vdc 1A PSU incorporated accepts 110-240Vac (5A Fused) Dimensions External 315 x 235 x 130mm Internal 300 x 220 x 120mm DIN Rail length 1 285mm DIN Rail length 2 180mm Part No Description ENC-DA3 DIN Rail Enclosure Assembly, Two Mounting Rails, 12Vdc PSU Fitted PSU12V1AIN-IP Power Supply 110-240Vac input, 12Vdc 1A Output Custom systems We regularly supply pre-wired / bespoke systems, please contact our sales dept for further assistance R. F. Solutions Ltd., Unit 21, Cliffe Industrial Estate, South Street, Lewes, E Sussex, BN8 6JL. England Tel +44 (0)1273 898 000 Fax +44 (0)1273 480 661 RF Solutions is a member of the Low Power Radio Association Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such information.

1 Configuring a Remote Telemetry System

(200Tx/201Tx -> 210Rx) There are three Steps: 1. Pre-Configure the 200 or 201 series transmitter 2. Pre- Configure the 210Rx to operat e with a 200 or 201 series transmitter 3. Marry a 200/201Tx to a 210Rx

1.1 Pre-Configure a 200/201 Transmitter Encoder

Mapping the 200/201 Transmitter I nputs to the 210 Receiver Outputs The Remote telemetry system automatically maps the 8 transmitter input channels to 8 receiver output channels. The ‘8/15’ option link on the transmitter allows selection of channels 1-8 or 9-15 on the receiver. 2. Enable Option Links (ENABLE 1-8) The 200 and 201 Transmitters have eight ‘Enable’ Opti on links which must be fitted in order for the corresponding input to be valid (otherwise the 210Tx will ignore it). This enables applications where many transmitters are used with a single 210Rx (many to one relationship) 3. Auto Transmit with Watchdog Mode ‘Auto Tx’ When the ‘Auto Tx’ link is made, the 200/201 Tx automatically transmi ts its data once within every 5 second period, in addition, channel 16 is allocat ed as a ‘system watchdog‘. As long as the 210Rx continues to receive this signal then output ‘16’ is held ON. If for any reason (fault or RF interference) the signal is not received for approx 20secs then output ‘16’ will drop out. 200/201 Tx Option Link 210 Rx output Channels Open 1 – 8 Connected 9 – 15

1.2 Pre-Configure a 210Rx to operate with a 200/201 Tx series transmitter

Ensure option link J8 is open. 2. Apply power to the 210Rx, All output LEDS flash alternately. This is factory reset default state. 3. Apply power to any 200 or 201 Tx and briefly operate any input by shorting any of the input terminals on the transmitter (ensure Enable link is fitted!), to force a transmit. 4. The 210Rx. LED2 flashes 5 times to indicate that the 210Rx is now configured for use with 200 / 201Tx. 5. Each time power is applied the 210Rx, LED2 flashes 5 times to show it is configured to operate with 200Tx transmitters. 6. Configuration is now complete and 200/201 transmi tter unit(s) can be learned to the 210Rx receiver. Note: Option links LK 1-16 have no affect on the operation of the remote telemetry system.

1.3 Marry a 200/201 Tx to a 210Rx

On the 200/201 Tx, remove the Link header ‘OPT1‘ (auto Tx). (prevents aut omatic transmission during the learn process). 2. On the 210Rx Ensure option link J8 is open. 3. Apply power to the 210Rx, note t hat LED2 flashes 5 times to show it is configured for use with 200Tx transmitters. 4. Briefly press the 210Rx Learn Switch: Note t hat the 210Rx Learn LED (LED 17) will flash. 5. Wait until the 210Rx Learn LED has stopped flashing but is still illuminated. 6. Apply power to any 200/201 Tx and briefly operate any input by shorting any of the input terminals on the Transmitter (ensure Enable link is fitted!), to force a transmit. 7. Note that the 210Rx learn LED will turn off. 8. The learn cycle is now complete and t he transmitter/encoder will operate the systems.

1.4 Erasing the 210Rx Receiver Outputs (R eturn to Factory Default State)

To completely erase the 210Rx decoder’s memory, press and hold the 210Rx learn switch. 2. The learn LED will illuminate 3. Hold the learn switch until the lear n LED extinguishes (approx 10 seconds). 4. Release the learn button and all the output LED’s will now flash alternately to indicate that all encoder data has been erased and the 210Rx has returned to factory default state. Note: It is not possible erase individual transmitters.

1.5 Connecting output M odules to the 210 Receiver

A range of ‘200’ series output modules are available which can be plugged into the 210 Receiver via the four IDC header boxes on the receiver. The selection of output module will be dependant on the application. Please see DS200S-1 for a summary the available modules.

1.6 Connecting an Antenna

The 210Rx has a 200mm flying lead cable (50ohm) with a panel mount BNC socket provided to mount on an enclosure. This cable may be extended however please note that typically ther e is a 50% range reduction with every 3metres of coax cable used! For increasing range performance a +3dB gain antenna is available. This is supplied with wall mounting bracket and 2metres of coax cable, it plugs in directly to the 210Rx BNC connector.

1.7 Range

The antenna choice and position directly controls the system range. Keep it clear of other metal in the system. The best position by far, is protrudi ng from the top of the product. This is often not desirable for practical or ergonomic reasons and thus a compromise may be needed. If an internal antenna must be used then try to keep it away from other metal items, and in particula r large ones like transformers, batteries and PCB tracks and earth planes. Note that the space around the antenna is as important as the antenna itself. All radio systems are dependant on a radio signal being received through airspace. The range quoted is the optimal in direct line of sight without obstacles and in good atmospheric conditions. Range is affected by many things, for example lo cal environmental conditions , atmospheric conditions, interference from other radio transmitters. For eval uating the local environment please see our RF Meter (DS006) In very worse case applications the range quoted may be reduced to 30% of the optimal range stated.

1.8 Signal integrity

In systems where many encoders are in close proximity there may be occasions when, due to signal overlay between encoders, it is difficult or impossible to guarantee system integrity. In such circumstances it is the responsibility of the installer to ensure that the system performance is adequate for the purposes of the installation.

1.9 Information availability

All products are supplied with their relevant datasheets. These are also available for download from the website or on request from RF Solutions Ltd. R. F. Solutions Ltd., Unit 21, Cliffe Industrial Estate, South Street, Lewes, E. Sussex, BN8 6JL, England Tel +44 (0)1273 898 000 Fax +44 (0)1273 480 661 RF Solutions is a member of the Low Power Radio Association All Trademarks acknowledged and remain the property of the respected owners Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such information.

8 Input Channels
Volt Free contact Inputs via Screw Terminals
12 / 24Vdc Supply
Range; ¾ 433MHz up to 200 Metres ¾ 433MHz NB up to 1,000 Metres ¾ 458MHz up to 6,000 Metres
High Security RF Protocol
Low Power Battery Version
Auto Transmit Mode
Automatic ‘Watchdog’ Transmission
Antenna Supplied

201 Transmitter: Low Power Transmitter . (Desi gned for battery powered applications) Part Numbering Part Number Description Range (Metres) Freq (MHz) Compatible Decoders 200-433FR FM Transmitter 200 433.92 210-433F 200-525NR FM Narrow Band Transmitter 1,000 434.525 210-525N 200-458FR FM High Power Transmitter 6,000 458.850 210-458F 201-525NR FM Narrow Band Transmitter 1,000 434.525 210- 525N 201-458FR FM High Power Transmitter 6,000 458.850 210-458F Range stated is optimum, direct line of sight. In worst conditions this can be reduced by upto 50% I/P 5 8 x Zero Volt Inputs RF Tx Transmitter 12 / 24Vdc Supply I/P 6 I/P 7 I/P 8 I/P 1 I/P 2 I/P 3 I/P 4 BNC Socket Enable 1-8 Auto Tx This is a simple to use radio transmitter module which can accept 8 pairs of ‘Volt free’ contacts inputs. When an input occurs the transmitter will transmit a data packet over the RF link to an associated receiver. (That has been learnt into the transmitter). The transmitter continually monitors the status of its ‘inputs’. It transmits a signal on any input change and also can be set to transmit automatically every 15 seconds . Full configuration instructions are given further in this document.

DS200-11 March ’06 ©2005 RF Soluti ons Ltd, www.rfsolutions.co.uk Page 8 Tel 01273 898000 Fax 01273 480661 Modular Radio Telemetry System 200 Series Technical Specifications Dimensions: Within DIN Rail: 200Tx : 112 x 82 mm (PCB: 109 x 72mm) 201Tx 160 x 82 mm (PCB: 145 x 72mm) Storage Temperature; -10 to +155o C Operating Temperature; -0 to +55o Celsius. Electrical Characteristics Min Typical Max Units Supply Voltage: 12V Supply 10 12 16 V Supply Voltage: 24V Supply 21 24 30 V Antenna Output Lead Impedance 50 Ohms Minimum input activation time to trigger transmission 5 ms 433MHz / 433NBMHz Version Supply Current: Quiescent 10 mA Supply Current: Transmitting Data 150 170 200 mA 458MHZ Version Supply Current: Quiescent 10 mA Supply Current: Transmitting Data 240 250 270 mA

200 Transmitter Current Consumption Min Typical Max Units

Supply Current: Quiescent 10 mA Supply Current: Transmitting Data 150 170 200 mA 458MHZ Version Supply Current: Quiescent 10 mA Supply Current: Transmitting Data 240 250 270 mA

201 Transmitter Current Consumption Min Typical Max Units

Supply Current: Quiescent 60 nA Supply Current: Transmitting - 433MHz NB module 50 mA Supply Current: Transmitting - 458MHz module 180 mA R. F. Solutions Ltd., Unit 21, Cliffe Industrial Estate, South Street, Lewes, E. Sussex, BN8 6JL, England Tel +44 (0)1273 898 000 Fax +44 (0)1273 480 661 RF Solutions is a member of the Low Power Radio Association Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such information.

DS200-11 March ’06 ©2005 RF Soluti ons Ltd, www.rfsolutions.co.uk Page 9 Tel 01273 898000 Fax 01273 480661 Modular Radio Telemetry System 200 Series Receivers Technical Specifications Dimensions: Within DIN Rail: 138 x 82 mm (PCB: 133 x 72mm) Storage Temperature: -10 to +70o Celsius. Operating Temperature: 0 to +55o Celsius. Electrical Characteristics Min Typical Max Units Supply Voltage: 12V Supply 10 12 16 V Supply Voltage: 24V Supply 21 24 30 V Supply Current : Quiescent 25 mA Time from Tx Switch depressed to 210Rx output 100 mSecs Time from Tx Switch release to Decoder output 200 mSecs Switched output Voltage (I out = 1mA) Logic Low Logic High 3.5 0.2 3.8 0.8 V V Part Numbering Part No Description 210-433FR Receiver Decoder 16 Channels DI N Rail Mounting, FM @ 433.92MHz 210-525NR Receiver Decoder 16 Channels DIN Rail Mounting, FM Narrow Band @ 434.525MHz 210-458FR Receiver Decoder 16 Channels DIN Ra il Mounting, FM High Power @ 458.850MHz Connector O/P Channels 1 1 - 4 2 5 – 8 3 9 – 12 4 13 – 16 O/P 13-16 Connects to any Output Module 210Rx O/P 9-12 O/P 5-8 O/P 1-4 12 / 24Vdc Supply BNC Socket This DIN rail module performs the radio reception and decoding for the 200 series modules. It has four output connectors each with four digital outputs and displays the output status on LED’s 1-16. Any of the DIN Rail output modules lug into these connectors marked 1-4 (Connecting cable supplied with output module).

211 Darlington Output

16 transistor switch outputs
Each Output switches to GND when operated
Each output rated 500mA at up to 50Vdc
Total cumulative output of module 1A @50Vdc The only connections required are
Screw terminals to connect to each channel output.
Direct connection to the 210 Receiver via the four ribbon cables / connectors supplied. Dimensions: Within DIN Rail: 70 x 82mm (PCB: 64 x 72mm) Storage Temperature: -10 to +70 o Celsius. Operating Temperature: 0 to +55 o Celsius. Electrical Characteristics Min Typical Max Units Supply Voltage From 210Rx module Output voltage 50 VDC Continuous current Load: Per Channel Total module 500 1,000 mA mA ‘215’ Relay Output Module
8 relay switches rated 230Vac at 5A
Each relay provides ‘input’ and ‘normally open’ screw terminals The only connections required are
Connection to the 210 Receiver via the ribbon cable supplied.
Connection to each relay via screw terminals provided. Dimensions: Within DIN Rail: 93 x 82 mm (PCB: 90 x 72mm) Storage Temperature: -10 to +70 o Celsius. Operating Temperature: 0 to +55 o Celsius. Electrical Characteristics Min Typical Max Units Supply Voltage From 210Rx module Relay* output Rating Type HRS1KH3-12 Max rating is 3A/220VAC/30VDC *The relay contacts in this unit are for functional use only and must not be used for isolation purposes

210 Rx 211

216 Relay Output Module

4 relay outputs rated at 230Vac ,12A peak and 5A continuous current rating.
‘normally open’ and ‘normally closed’ screw terminals. Dimensions: Within DIN Rail: 135 x 82 mm (PCB: 132 x 72mm) Storage Temperature: -10 to +70 o Celsius. Operating Temperature: 0 to +55 o Celsius. Electrical Characteristics Min Typical Max Units Supply Voltage From 210Rx module Relay* output Rating (type KB12) at 230Vac 5 12 A *The relay contacts in this unit are for functional use only and must not be used for isolation purposes

230 Relay Output Module

4 relay (type K7SFA12) outputs rated for up to 30A at 230Vac.
Each relay provides ‘input’ and ‘normally open’ Spade Terminals. Dimensions: Within DIN Rail: 115 x 82 mm (PCB: 109 x 72mm) Storage Temperature: -10 to +70o Celsius. Operating Temperature: 0 to +55 o Celsius. Electrical Characteristics Min Typical Max Units Supply Voltage From 210Rx module

30 A Relay output Rating @ 230Vac*

@ 12Vdc 20 A *The relay contacts in this unit are for functional use only and must not be used for isolation purposes R. F. Solutions Ltd., Unit 21, Cliffe Industrial Estate, South Street, Lewes, E Sussex, BN8 6JL. England Tel +44 (0)1273 898 000 Fax +44 (0)1273 480 661 RF Solutions is a member of the Low Power Radio Association Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such information. 210 Rx Relay Outputs 1 - 4 216

Product Information

210-458FR specifications and overview.

Summary

Modular Radio Telemetry System

Description

Modular Radio Telemetry System

Source title 210-458FR Datasheet(PDF) - rfsolutions.ltd

Related Parts

More parts from the same family.

Browse manufacturer