PR710 WILCOXON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com SPECIFICATIONS PR710 series Rack mountable signal conditioners Accessories supplied: Power supply 47-63 Hz, 100-250 VAC Options: Custom gain, filters and bench mount stand Key features
- PR710A powers IEPE accelerometers, PR710B powers the 731 seismic sensor
- Selectable gain of x1, x10 or x100
- Continuous fault monitoring of each channel
- Selectable filtering
- Manufactured in ISO 9001 facility Input: Voltage to transducer 24 VDC Current to transducer 4 mA Maximum input voltage (gain = 1) 6.5 V rms Output impedance 50 Ω Recommended load impedance >50 kΩ Maximum output voltage 6.5 V rms Noise, RTI 2.5 to 25 kHz: PR710A PR710B <20 µV rms <5 µV rms Spectral noise, input, nominal (dB/√Hz): 2 Hz 10 Hz 100 Hz -140 -150 -150 Channels 10 Gain 1, 10, or 100 Gain accuracy ± 0.2 dB Frequency response: None, < -3 dB Filter, -3 dB Velocity, -3 dB 0.05 - 45,000 Hz 0.05 - 1,000 Hz 1.0 - 20,000 Hz Amplitude nonlinearity <1% Total harmonic distortion <1% Channel separation >60 dB Voltage, min. 28 - 30 VDC Current, max 500 mA Temperature range 0° to +55°C Relative humidity, non-condensing 5% - 95% Usable altitude limit 2,000 meters Dimensions (W x H x D) 19 x 5.22 x 3.7 inches Signal input connector: PR710A PR710B isolated BNC twin axial BNC Signal output connector isolated BNC 98718 Rev.B.1 09/18