786C WILCOXON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com SPECIFICATIONS 786C Industrial accelerometer Notes: 1 The 786C employs a watertight epoxy seal. Accessories supplied: SF6 mounting stud Key features
- General purpose with BNC connector
- Manufactured in ISO 9001 facility Sensitivity, ± 5%, 25°C 100 mV/g Acceleration range, VDC > 25 V 80 g peak Amplitude nonlinearity 1% Frequency response, nominal: ± 10% ± 3 dB 1 - 9,000 Hz 0.5 - 14,000 Hz Resonance frequency, mounted, nominal 30 kHz Transverse sensitivity, max 5% of axial Temperature response: –25°C +120°C –10% +10% Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g, nominal: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 700 µg 10 µg/√Hz 5 µg/√Hz 5 µg/√Hz Output impedance, max 100 Ω Bias output voltage, nominal 12 VDC Grounding case isolated, internally shielded Temperature range –50° to +120°C Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity, equiv. g, max 70 µg/gauss Sealing1 IP67 Base strain sensitivity, max 0.0002 g/μstrain Weight 90 grams Case material 316L stainless steel Mounting 1/4-28 UNF tapped hole Connector BNC Connections Function Connector pin power/signal A common B 98870 Rev.C.1 09/18 2.4" 0.75" BNC connector