PPWA150B TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 23/07/2020 Page: 1 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Description: The PPWA150 series of compact, open-framed AC-DC switching power supplies offers a high power density to fit in a small space. This dense 2” x 4” platform offers up to 150W of continuous power across a wide range of operating temperatures, all while maintaining a low emissions profile. All models meet FCC, EN55011, and CISPR11 class B emission limits, and comply with CE, IEC, and more. Features:

  • Compact Size 2” x 4” x 1.02”
  • Wide-range Input 90-264 VAC
  • Level B Emissions
  • RoHS Compliant
  • U Channel and Open Frame Options
  • Built-in Active PFC
  • High Power Density 18.75W/in3 Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 12CFM or Fan Option Output Watts O/P Regulation Ripple & Noise (Vp-p) PPWA150B-12 12V 0A 8.33A 12.5A 150W 3% 150mV PPWA150B-13 15V 0A 6.67A 10A 150W 3% 150mV PPWA150B-13-2 19V 0A 5.26A 7.89A 150W 3% 190mV PPWA150B-14 24V 0A 4.16A 6.25A 150W 3% 240mV PPWA150B-15 28V 0A 3.57A 5.35A 150W 3% 280mV PPWA150B-18 48V 0A 2.08A 3.12A 150W 3% 300mV Notes: 1. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 2. Peak-to-peak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic capacitor. 3. For U-Channel version, add suffix “B” to part number. Example PPWA150B-12B.

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 23/07/2020 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Input Input Voltage 90-264VAC Input Frequency 47-63Hz Input Current 2.0A (rms) for 100VAC 1.0A (rms) for 240VAC Inrush Current 90A @ 230 VAC, at 25°C cold start Earth Leakage Current 440 μA max. @ 264 VAC, 60 Hz No Load Input Power <0.3 watts Power Factor >0.9 Output Output Voltage/Current See Rating Chart Maximum Output Power See Rating Chart Hold Up Time 16ms minimum at 115 VAC Line Regulation ±0.5% maximum at full load Efficiency 85% typical Switching Frequency 65 KHz Minimum Load No Minimum Load Protection Features Overvoltage Protection Set at 105-140% of its nominal output voltage Overcurrent Protection All outputs protected to short circuit conditions. Auto recovery. Temperature Coefficient All outputs ±0.04% /°C maximum Transient Response Maximum excursion of 5% or better on all models, recovering to 1% of final value within 500 us after a 50% step load change. Environmental Operating Temperature 0°C to +70°C Low Temperature Startup -25°C. Some operating parameters may be exceeded for the initial 20 minutes of warm-up Storage Temperature -25°C to +85°C Relative Humidity 5% to 95% non-condensing Derating Derate linearly from 150W at 50°C to 75W at 70°C with 12 CFM airflow. Derate linearly from 100W at 40°C to 50W at 60°C with convection cooling. General Specifications Dimensions 4”(101.6mm) x 2”(50.8mm) x 1.02”(29mm) MTBF 100,000 hours at full load at 25ºCambient calculated per MIL-HDBK -217F

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 23/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Continued Safety Approvals USA/Canada UL60950-1 CSA C22.2 No. 60950-1 Approvals Europe Nemko EN60950-1 CB IEC 60950-1 Isolation

3000 VAC from input to output

1500 VAC from input to ground

500 VAC from output to ground

*Consult with TT Electronics for information on additional country safety approvals EMC EN55022 FCC Class B conducted Class B conducted Harmonic Currents Voltage Flicker Electrostatic Discharge Radiated Immunity EFT/Burst Surge Immunity Conducted Immunity Magnetic Field Dips/Interruptions IEC 61000-3-2: Class D IEC 61000-3-3 IEC 61000-4-2: ±8kV Air, ±4kV contact IEC 61000-4-3: 3V/m IEC 61000-4-4: ±1kV IEC 61000-4-5: 1kV diff, 2kV com IEC 61000-4-6: 3Vrms IEC 61000-4-8: 1A/m IEC 61000-4-11: Voltage dip immunity, 30% reduction for 500ms, >95% reduction for 10ms

TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 © TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 23/07/2020 Page: 4