PPM05-A-0505DLF PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Telefon: +49 (0) 6135 7026 -0 Telefax: +49 (0) 6135 931070 www.peak-electronics.de info@peak-electronics.de PPM-Series PPMxx-x-xxDLF 5 - 20 W AC/DC CONVERTER TRIPLE OUTPUT Input Specifications Input voltage range 85- 264VAC, 120- 370VDC Input frequency 47- 63Hz Input current PPM05 PPM10 PPM15 PPM20 PPM25 110VAC 230VAC 120mA , typ. 70mA , typ. 230mA , typ. 120mA , typ. 250mA , typ. 140mA , typ. 330mA , typ. 180mA , typ. 420mA , typ. 230mA , typ. Inrush current PPM05 PPM10 PPM15 PPM20/PPM25 110VAC 230VAC 10A, typ. 20A, typ. 10A, typ. 20A, typ. 10A, typ. 20A, typ. 16A, typ. 30A, typ. External input fuse(recommended) PPM05 PPM10/PPM15 PPM20/PPM25 1A/250V slow blow 2A/250V slow blow 3.15A/250V slow blow Output Specifications Voltage set accuracy ±2%(main out) Input variation ±0.5% (main output) ±1.5% (supplement output) Load variation (10-100%) Isolated triple out put (balanced load) Vo1 ±3% (Main output) ±Vo2 ±5% (Supplement output) Ripple& noise(p-p) 20MHz Bandwidth ≤100mV Short circuit protection Continuous, and auto resume Over current protection ≥110% IO Over output voltage protection 3.3 / 5VDC models 9VDC model 12 / 15VDC model s 24VDC model 48VDC model ≤6.5VDC ≤12VDC ≤20VDC ≤30VDC ≤60VDC General Specifications Temperature ranges Operating : Power derating above 55° C: Storage: Case temperature: -25° C to +70° C 3.75% / ° C -25° C to +105° C +90° C max Weight PPM05, PPM10, PPM15, PPM20/25 ~50g, ~70g , ~80g, ~120g Hold-up time (Vin=230VAC) 80m s(typ.) Humidity (non condensing) 85%(max) Temperature coefficient 0.02% /° C Switching frequency 150kHz max Efficiency See table I/O-isolation voltage 3000VAC/1Min Leakage current 0.3mA RMS typ.. 230VAC/50Hz Case material UL 94V-0 rated Install PCB MTBF >200,000h @25° C RoHS compliant Soldering 260° C / max. 10 sec.

NOTE: Unit: mm Pin section: 1.00mm Pin tolerances: +/- 0.1mm General tolerances: +/- 0.5mm PPM-Series PPMxx-x-xxDLF 5 - 20 W AC/DC CONVERTER TRIPLE OUTPUT Examples of Partnumbers/Modelcode PART NO. Power (Watt) INPUT CURRENT (mA, typ.) 110V / 230V OUTPUT (Vo1 / Io1) OUTPUT (Vo2 / Io2) RIPPLE AND NOISE (typ.) EFFICIENCY (% min.) PPM05-A-0505DLF 5 120 / 70 5V / 800mA ±5V / 100mA 50mV 76 PPM05-A-0512DLF 5 120 / 70 5V / 600mA ±12V / 100mA 50mV 76 PPM05-A-0515DLF 5 120 / 70 5V / 600mA ±15V / 80mA 50mV 76 PPM05-A-0524DLF 5 120 / 70 5V / 600mA ±24V / 50mA 50mV 76 PPM10-B-0505DLF 10 230 / 120 5V / 1200mA ±5V / 400mA 50mV 78 PPM10-B-0512DLF 10 230 / 120 5V / 1000mA ±12V / 200mA 50mV 78 PPM10-B-0515DLF 10 230 / 120 5V / 900mA ±15V / 200mA 50mV 78 PPM10-B-0524DLF 10 230 / 120 5V / 1000mA ±24V / 100mA 50mV 78 PPM15-C-0505DLF 15 250 / 140 5V / 2000mA ±5V / 500mA 50mV 80 PPM15-C-0512DLF 15 250 / 140 5V / 2000mA ±12V / 200mA 50mV 80 PPM15-C-0515DLF 15 250 / 140 5V / 1800mA ±15V / 200mA 50mV 80 PPM15-C-0524DLF 15 250 / 140 5V / 2000mA ±24V / 100mA 50mV 80 PPM20-D-0505DLF 20 330 / 180 5V / 2500mA ±5V / 500mA 50mV 82 PPM20-D-0512DLF 20 330 / 180 5V / 2000mA ±12V / 400mA 50mV 82 PPM20-D-0515DLF 20 330 / 180 5V / 2000mA ±15V / 300mA 50mV 82 PPM20-D-0524DLF 20 330 / 180 5V / 2000mA ±24V / 200mA 50mV 82 Other specifications please enquire. Dimensions / Pinning No. PPMxx- A No. PPMxx- B No. PPMxx- C No. PPMxx- D A 12.5 A 17.5 A 17.5 A 20.0 B 48.5 B 55.0 B 62.0 B 70.0 C 40.5 C 47.0 C 54.0 C 62.0 D 4.0 D 5.0 D 5.0 D 5.75 E 16.0 E 20.0 E 20.0 E 23.0 F 36.0 F 45.0 F 45.0 F 48.0 G 20.5 G 20.5 G 22.5 G 23.5 H 6.0 H 6.0 H 6.0 H 6.0 # Triple out

1 Ground

2 AC (N)

3 AC (L)

7 COM

PPM-Series PPMxx-x-xxDLF 5 - 20 W AC/DC CONVERTER TRIPLE OUTPUT App Notes Remarks : 1.Ripple and Noise were measured by the method of parallel lines; 2.Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, TA=25° C, humidity < 75%; 3.All specifications stated in this datasheet are subject to the above listed model only. For specifications of non-standard model, please contact our technical support team. Parallel Lines Measure C1 C2 Copper sheet Load 25.4mm 25.4mm Connect Oscillograph Probe Fuse Typical Applications PPM-Series PPMxx-x-xxELF (single Output) L +Vo -Vo L N N C1 C2 Fuse FG FG Tvs1 RL NT C PPMxx-x-xxZSLF (Isolate Twin Output) C 4 C3 C 2 Vo 1 Vo 2 TV S1 TV S2 R L RL Fuse LL N N FG FG NT C PPMxx-x-xxZLF (Dual output) Fuse +Vo LL N -Vo N Com C2 C1 R L TVS1 TV S2 RL FG F G NTC PPMxx-x-xxDLF (Triple Output) + Vo1 - Vo2 Com +Vo2 TV S1 TVS3 RL RL C4 C3 TVS 2 RL N N FG F G Fuse LL N TC -Vo 1 External Typical Value Vout C1/C3/C5 C2/C4/C6 TVS 3.3V 330 -10 00uF/16V P6KE6.8A 5V 330 -1000uF/16V P6KE6.8A 12V 47 -220uF/25V P6KE16A 15V 47 -220uF/25V P6KE20A 24V 10 -120uF/35V P6KE33A 48V 10 -68uF/63V 0.1uF/50-100V (Ceramic Capacitor) P6KE62A Remarks 1.Output filtering capacitor C5, C3 and C1 are electrolytic capacitor. It is recommended to use high frequency and low resistance electrolytic capacitor. For capa citance and current of the capacitor please refer t o suppliers’ specifications. Voltage derating of capa citor should be 80% or above. C2, C4 and C6 elim inate high frequency noise. TVS is a recommended component to protect post-circuits (when converter fails). 2. External input NTC is recommended to use 5D-9 (Only PPM10 model and PPM15 model) Specification can be changed without notice. Copyright PEAK electronics GmbHcs REV old: Jan. 08 REV new: Oct. 08 Changed: new Models