PPM03-S-15ELF

PPM03-S-3R3ELF PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

PPM-Series – PPM03-S-xxELF – Single Output - Plasti c Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 PPM03-S-xxELF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Input Voltage Range 85 – 264 VAC or 110 – 370 VDC universal Input Frequency 47 – 440 Hz Input (Inrush) Current PPM03 models

110 VAC 230 VAC

65 mA (10A), typ. 30mA (20A), typ. External Input Fuse (recommended) 0.5A / 250V slow blow Output Specifications Voltage Accuracy ±2%, typ (±3% @3.3 Vout) Input variation ±0.5% Load variation (10-100%) ±1% Ripple and Noise (20Mhz bandwidth) ≤ 60mV pk-pk Short Circuit Protection Continuous, auto recovery Over output voltage protection Chip lock up Common Specifications Temperature range -25° C to +70 ° C Power derating 2% / ° C Case temperature +95° C (max) Storage -40° C to +105 ° C Hold up Time 50mS, typ. (230VAC) Humidity (non condensing) 95%, max. Temperature Coefficient 0.02%/° C (main output) Switching Frequency 100kHz I/O Isolation Voltage 3000VAC / 1min. Leakage current None EMI / RFI conducted EN55022, level A EMC compliance ESD RF EFT / bursts Surge IEC/EN 61000-4-2 level 4 8KV/15KV IEC/EN 61000-4-3 IEC/EN 61000-4-4 level 3 IEC/EN 61000-4-5 level 3 1KV/2KV Safety Standarts IEC60950, EN60950, UL60950 Safety Approvals EN60950, UL60950 Safety Class CLASS 2 Case Material UL94V-0 rated Reliability Calculated MTBF (MIL-HDBK-217F) > 300,000 hrs Weight ~ 40g Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PPM (Series are high efficiency green power moduls with various packaging provided by Peak. The features of this series are: wide input voltage, DC and AC all in one, high efficiency, high reliability, low loss, safety isolation etc. They are widely used in industrial, office and civil equipments. EMC and safety standards meet international standards IEC61000 UL60950 and IEC60950, and Multi(certificate is in processing. PPM-SERIES /checkbld 3 Watt /checkbld Univ. 85-264VAC (110-370VDC) /checkbld Single Output /checkbld Over Voltage Protection (out) /checkbld 3 kV AC I/O Isolation /checkbld Low Ripple and Noise /checkbld High Efficiency Rev.05-2011

PPM-Series – PPM03-S-xxELF – Single Output - Plasti c Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single Output Order # Power (W) Output Voltage (Vdc) Output Current Full Load (mA) Efficiency (%) SINGLE OUTPUT PPM03-S-3R3ELF 2.3 3.3 700 63 PPM03-S-05ELF 3 5 600 72 PPM03-S-09ELF 3 9 330 74 PPM03-S-12ELF 3 12 250 76 PPM03-S-15ELF 3 15 200 76 PPM03-S-24ELF 3 24 125 78 If you need other specifications, please enquire. Package / Pinning / Derating 17.78 (0.70) 23.00 (0.91) 0.8 (0.03) # SINGLE

1 AC (L)

3 AC (N)

13 N.C. 14 - Vout 16 +Vout 22 +Vin (DC) 23 - Vin (DC) PIN CONNECTIONS -25 -10 0 55 70 100

20 Load(%)

Temperature(° C)

PPM-Series – PPM03-S-xxELF – Single Output - Plasti c Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 App Notes: +V0 -V0 L N MOV + + *FUSE *NTC L N C1 C2 TVS RL +V0 -V0 L N MOV NF + +22 *FUSE *NTC L N C1 C2 TVS RL EXTERNAL CAPACITORS TYPICAL VALUE(Unit: µµ µµ F) Model C1 C2 C3 TVS PPM03(S(3R3ELF 150 0.1 4.7/400V P4KE6.8A PPM03(S(05ELF 150 0.1 4.7/400V P4KE6.8A PPM03(S(09ELF 120 0.1 4.7/400V P4KE12A PPM03(S(12ELF 120 0.1 4.7/400V P4KE20A PPM03(S(15ELF 120 0.1 4.7/400V P4KE20A PPM03(S(24ELF 68 0.1 4.7/400V P4KE30A Note: 1. Output filtering capacitors C1, C3 is electrolytic capacitors, It is recommended to use high frequency and low impedance electrolytic capacitors. For capacitance and curren t of capacitor please refer to manufacture’s datash eet. Voltage derating of capacitor should be 80% or above. C2 is ceramic capacitor, it is used to filter high frequency nois e. TVS is a recommended component to protect post(circuits (if converter fails). 2. MOV is required to PPM03 models to protect the device under surge. 3. It is recommended to connect FUSE 4. If EMC performance is required, recommended to add “EMC filter” at the input end (see figures) C6: X capacitor, recommended parameter 0.1µ F/275V; C7,C8: Y capacitor, recommended parameter 2200pF/400V; NF: common model choke, recommended inductance is about 10mH(30mH. 5. PPM03 models: Terminals 22 and 26 are internal rectification and filtering terminals. To protect the models further, it is recommended to connect an electrolytic capacitor C3 (it is recommended to be 4.7µF/400V). If operation voltage of the module is between 160~264VAC, C3 can be removed.