JRS CROUZET | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Products and specifications subject to change without notice. Consult factory for application assistance. 204 Airline Drive, Suite 300, Coppell, Texas 75019 / Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com 5-12 JRS SERIES ALTERNATING RELAY WITH SELECTOR SWITCH UL listed
- Duplex Alternating Control
- SPDT or DPDT Control Relay
- 10 Amp Rated
- Externally Controlled
- Selection of Lead or Lag Load SPECIFICATIONS: ±15%, 50/60 Hz Maximum power consumption . . . 24 VAC: 1.5 VA
110 VAC: 5 VA
220 VAC: 11VA
Relay maximum power rating . . . . 2200 VA 80 W MOUNTING L = 11 pin plug-in P = 8 pin plug-in SERIES LJRS 2 = DPDT PJRS = SPDT PJRXS = DPDT (crosswired) NOTE: DPDT relay available only with 11 pin plug-in (L). L MOUNTING JRS 2 SERIES 110A INPUT POWER INPUT POWER 24A = 24 VAC/DC 110A = 110 VAC 220A = 220 VAC WIRING DIAGRAM: ORDERING INFORMATION: The electronic alternating relay is designed to replace mechanical style devices used in control applications requiring a duplexing or alternating action of the control circuits to operate pumps, compressors, etc. This is achieved by activating a control switch which is common to one side of the input control voltage. The output contact of the relay(s) change state when this switch is opened (on de-energization of the control circuit). When the control initiate switch is actuated and released or opened, the relay will change state. The next time the initiate switch is actuated, it will change back to its original state. Two red LED’s located on the top of the dust resistant enclosure provide the status of the relay. A 3 Position Selector switch is installed for selection of normal opera- tion (alternating) or selection of lead or lag load. 5 6 7 111 LJRS2PJRXSPJRS INITIATE SWITCH INITIATE SWITCH INITIATE SWITCH