PP15 APP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

www.andersonpower.com - 20 - All Data Subject To Change Without Notice | PP15-45 ORDERING INFORMATION | PP15-45 series are the smallest Powerpole ® housings. They can be used for wire-to-wire or wire- to-board applications. Wire sizes from #20 AWG (0.75 mm²) to #10 (6 mm²) offer power capabilities up to 55 amps per pole. Finger proof housings and the ability to incorporate first-mate last-break ground connectors enhance the capabilities of this Powerpole ® series. High Power Density

  • Up to 55 amps in a compact footprint Wire-to Wire & Wire-to-Board Configurations
  • Wire & PCB contacts can be used in the same housings Finger Proof Housings Available
  • Protects against accidental contact with live circuits Powerpole® Connectors - PP15 to PP45 : up to 55 Amps Finger Proof Rib Feature [ 17.27 ] 0.68 [ 3.81 ] 0.15 [ 6.35 ] 0.25 A Open Barrel Contact SECTION 2 Powerpole® PP15 to 45 45A Premate Ground Housings Green housings are keyed to prevent accidental mating with standard or finger proof Powerpole ® housings. Green 1827G1-BK 1827G1 PP15-45 Finger Proof Housings Improved on the original APP® design by adding ribs to mating interface to protect against accidental contact with live circuits. Meets the requirements of UL1977 section 10.2 and is rated IP20. Will not mate with standard housings. Red 1327FP-BK 1327FP Green 1327G5FP-BK 1327G5FP Black 1327G6FP-BK 1327G6FP White 1327G7FP-BK 1327G7FP Blue 1327G8FP-BK 1327G8FP Yellow 1327G16FP-BK 1327G16FP PP15-45 Standard Housings The original housing design has an open interface and is available in a wide array of colors. Will not mate with finger proof housings. Red 1327-BK 1327 Green 1327G5-BK 1327G5 Black 1327G6-BK 1327G6 White 1327G7-BK 1327G7 Blue 1327G8-BK 1327G8 Yellow 1327G16-BK 1327G16 Orange 1327G17-BK 1327G17 Gray 1327G18-BK 1327G18 Brown 1327G21-BK 1327G21 Pink 1327G22-BK 1327G22 Purple 1327G23-BK 1327G23 PP15-45 Tin Plated Power Contacts Offer cost effective performance up to 1,500 mating cycles. See specifications and temperature charts for amperage ratings by wire size. Dimensions Mating Loose Piece Reeled - A - Open 14 to 10 K* 2.1 to 5.3 High 269G3-LPBK 269G3 0.21 5.33 Open 14 to 10 K* 2.1 to 5.3 Low 261G2-LPBK 261G2 0.20 5.08 Open 14 to 10 SF* 2.1 to 6.0 High 201G1H-LPBK 201G1H 0.24 6.10 Open 14 to 10 SF* 2.1 to 6.0 Low 200G1L-LPBK 200G1L 0.24 6.10 Open 16 to 12 1.3 to 3.3 High 269G1-LPBK 269G1 0.18 4.57 Open 16 to 12 1.3 to 3.3 Low 261G1-LPBK 261G1 0.18 4.57 Open 20 to 16 0.52 to 1.3 High 269G2-LPBK 269G2 0.16 4.06 Open 20 to 16 0.52 to 1.3 Low 262G1-LPBK 262G1 0.16 4.06 Open 20 to 16 SF* 0.52 to 1.5 Low 200G2L-LPBK 200G2L 0.20 5.08 K* - For #10 AWG class K stranded wire or smaller. For larger wires use superflex contacts. SF*- Indicates wires with high stranding such as Super Flex. PP15-45 Finger Proof & Standard & Ground Housing Dimensions Front View Mated Length [ 24.6 ] 0.97 [ 41.2 ] 1.62 [ 8.4 ] 0.33 [ 7.9 ] 0.31 [ 7.9 ] 0.31

www.andersonpower.com - 21 - All Data Subject To Change Without Notice See website for PCB layout drawing. SECTION 2 Powerpole® PP15 to 45 Open Barrel Contact A B [ 16.26 ] 0.64 [ 3.81 ] 0.15 [ 7.35 ] 0.29 [ 17.27 ] 0.68 [ 3.81 ] 0.15 [ 6.35 ] 0.25 A Closed Barrel Contact [ 9.9 ] 0.39 A B [ 3.1 ] 0.12 A Housing end [ 19.1 ] 0.75 [ 6.4 ] 0.25 [ 3.6 ] 0.14 [ 6.1 ] 0.24 [ 6.1 ] 0.24 Open Barrel Premate Contact PP15-45 Silver Plated Power Contacts Maximize performance by offering up to 10,000 mating cycles and are recommended for circuit interrupt or hot plug applications. See specifications and temperature charts for amperage ratings by wire size. Only closed barrel contacts are suitable for soldering. Dimensions Mating Loose Piece Reeled - A - - B - Open 14 to 10 K* 2.1 to 5.3 Low - 261G3-LPBK 261G3 0.20 5.08 - - Open 14 to 10 SF* 2.1 to 6.0 High - - 201G3H 0.24 6.10 - - Open 14 to 10 SF* 2.1 to 6.0 Low - 200G3L-LPBK 200G3L 0.24 6.10 - - Open 16 to 12 1.3 to 3.3 Low - 261G4-LPBK 261G4 0.18 4.57 - - Open 20 to 16 0.52 to 1.3 Low - 262G2-LPBK 262G2 0.16 4.06 - - Open 20 to 16 SF* 0.52 to 1.5 Low - - 200G4L 0.20 5.08 - - K* - For #10 AWG class K stranded wire or smaller. For larger wires use superflex contacts. SF*- Indicates wires with high stranding such as Super Flex. 45A Premate Ground Wire Contacts Tin or silver plated contacts are rated for ground or power. Hand tools are available for loose piece contacts. Reeled contacts can be used with high volume press and applicator tooling. Tin contacts are rated for up to 1,500 mating cycles. Silver contacts are rated up to 10,000 mating cycles. Reeled Mating Loose Piece Part Type AWG mm² Force - Part Numbers - - Numbers - Open, Tin 14 to 10 2.1 to 6.0 Low 1830G1-LPBK 1830G1 Open, Silver 14 to 10 2.1 to 6.0 Low 1830G2-LPBK 1830G2 25A Right Angle PCB Contacts Tin Plated Suitable for right angle applications up to 25A per pole. Tin plating enhances solderability. Cannot be mixed with 45A PCB contacts. For mating with wire contacts only. Dimensions Mating Loose Piece - A - - B - Top Low 1377G1-BK 1377G1 0.59 14.80 1.52 38.60 High 1317G1-BK 1317G1 Bottom Low 1377G2-BK 1377G2 0.29 7.20 1.36 34.50 High 1317G2-BK 1317G2 Top Low 1377G11-BK 1377G11 0.59 14.80 1.21 30.70 High 1317G11-BK 1317G11 Bottom Low 1377G12-BK 1377G12 0.29 7.20 1.01 25.70 High 1317G12-BK 1317G12 25A Vertical PCB Contacts Tin Plated For mating with wire contacts only. Suitable for vertical applications up to 25A per pole, tin plating enhances solderability. Dimensions Mating Loose Piece - A - Low 1377G3-BK 1377G3 2.22 56.40 High 1317G3-BK 1317G3 2.22 56.40 Low 1377G4-BK 1377G4 1.76 44.70 High 1317G4-BK 1317G4 1.76 44.70 Low 1377G13-BK 1377G13 1.17 29.70 High 1317G13-BK 1317G13 1.17 29.70 45A Right Angle and Vertical PCB Contacts Tin Plated Suitable for right angle or vertical applications up to 45A per pole. Tin plating enhances solderability. Right angle contacts cannot be mixed with 25A PCB contacts. For mating with wire contacts only. Loose Piece Vertical 3-5911P1 1335G1 Right Angle Bottom Row 3-5912P1 1336G1 Right Angle Top Row 3-5913P1 1337G1 [ 5.1 ] 0.20 [ 7.9 ] 0.31 TYP [ 29.7 ] 1.17 REF [ 7.9 ] 0.31 TYP Vertical [ 36.5 ] 1.44 [ 28.6 ] 1.13 [ 5.8 ] 0.23 [ 16.3 ] 0.64 Right Angle Contact Horizontal (top), Cat.No. 1337G1 Right Angle Contact Horizontal (bottom) Cat.No. 1336G1 PP15/45 Housings (1327 Series) Use mounting staples with right angle contacts (see accessories). Use mounting staples with right angle contacts (see accessories).

www.andersonpower.com - 22 - All Data Subject To Change Without Notice SECTION 2 Powerpole® PP15 to 45 45A Premate Ground PCB Contacts Right angle contacts are suitable for power or ground. Use to mate with 45A ground wire contacts. Tin plated contacts are rated up to 1,500 mating cycles. Can be used with other 45A PCB connectors in the bottom row. Mating Loose Piece PCB, Bottom Row Low 3-5952P1 1836G1 Pre-mate wire connector [ 45.3 ] 1.78 [ 41.2 ] 1.62[ 14.7 ] 0.578 [ 7.9 ]

0.31 TYP

[ 8.4 ]

0.33 TYP

[ 7.9 ] 0.31[ 28.1 ] 1.11 [ 5.6 ] 0.22[ 3.6 ] 0.14 Mated Pair | PP15-45 ULTRASONICALLY BONDED ASSEMBLIES | Assemblies feature housings that are ultrasonically welded to create a one piece connector unit using an APP® special process. After welding, retaining pins are no longer required to secure the stacked housings to each other. This allows Powerpole® 15-45 connectors to be used as a durable one piece connector header. Contact customer service for configurations not shown below. Single Row 1x2 Assemblies Housings with Housings with 45A Vertical 45A Right Angle Color & Type Circuit Description Housings Only PCB Contacts PCB Contacts Position Matrix DC 2 Wire Standard Housings ASMPP30-1X2-RK ASMPV45-1X2-RK ASMPR45-1X2-RK RED / STD BLK / STD DC 2 Wire Reverse Standard Housings ASMPP30-1X2-KR ASMPV45-1X2-KR ASMPR45-1X2-KR BLK / STD RED / STD DC 2 Wire Finger Proof ASMFP30-1X2-RK ASMFV45-1X2-RK ASMFR45-1X2-RK RED / FP BLK / FP DC 2 Wire Finger Proof Reverse ASMFP30-1X2-KR ASMFV45-1X2-KR ASMFR45-1X2-KR BLK / FP RED / FP Single Row 1x3 Assemblies Housings with Housings with 45A Vertical 45A Right Angle Color & Type Circuit Description Housings Only PCB Contacts PCB Contacts Position Matrix DC 2 Wire Finger Proof with Ground ASMFP30-1X3-KER N/A ASMFR45-1X3-KER BLK / FP GRN / GND RED / FP AC Single Phase Finger Proof ASMFP30-1X3-KEW ASMFV45-1X3-KEW ASMFR45-1X3-KEW BLK / FP GRN / GND WHT / FP Two Row 2x1 Assemblies Housings with Housings with 45A Vertical 45A Right Angle Color & Type Circuit Description Housings Only PCB Contacts PCB Contacts Position Matrix DC 2 Wire Finger Proof ASMFP30-2X1-KR ASMFV45-2X1-KR ASMFR45-2X1-KR BLK / FP RED / FP DC 2 Wire Finger Proof Mate ASMFP30-2X1-RK ASMFV45-2X1-RK ASMFR45-2X1-RK RED / FP BLK / FP Two Row 2x2 Assemblies Housings with Housings with 45A Vertical 45A Right Angle Color & Type Circuit Description Housings Only PCB Contacts PCB Contacts Position Matrix AC 3 Phase, 3 Wire Finger Proof ASMFP30-2X2-KRWE N/A N/A BLK / FP RED / FP WHT / FP GRN / GND AC 3 Phase, 3 Wire Finger Proof Mate ASMFP30-2X2-WEKR N/A ASMFR45-2X2-WEKR WHT / FP GRN / GND BLK / FP RED / FP Type STD = Standard Housing FP = Finger Proof Housing GND = Ground Housing Single Row 1x2 Assembly Single Row 1x3 Assembly Two Row 2x1 Assembly Two Row 2x2 Assembly 1 2 1 2 3 1 2 3 4 Hood Up

www.andersonpower.com - 23 - All Data Subject To Change Without Notice Powerpole® Pak connector shells enclose stacked groupings of PP15-45 sized housings in a durable black shell for a finished connector appearance and additional features. Inline, panel mount, and blindmate configurations are available. Plug shells offer the option of integral latches and strain relief to help secure your connection.

  • Package Groupings of PP15-45 Connectors Provides a finished appearance while protecting the individual connectors with an outer shell
  • Inline, Panel Mount, “T” or Blindmate Configurations Allows one connection system to meet multiple needs
  • Optional Latching and Strain Relief Secures your connection and wires | Powerpole® Pak ORDERING INFORMATION | Plug Shell without Latch Can mate inline with other plug shells with or without latches, or mate to a panel mount receptacle. For use with Powerpole® wire connectors only. Cable Clamp and Hardware Pak or Retaining Pins must be ordered separately. Dimensions - A - Black, 2-4 Poles 1461G1-BK - 1461G1 1.24 31.50 Black, 5-6 Poles - 1461G2-BK 1461G2 1.56 39.62 Black, 7-8 Poles - 1461G3-BK 1461G3 1.87 47.50 For environmentally sealed connector shells to hold Powerpole ® 15-180 connectors, see APP ®’s SPEC Pak ® product series on our website, www.andersonpower.com Snap-in T-Pak Plug shell without latch Plug shell with latch Blindmate Powerpole® Pak Connectors - PP15 to PP45 Powerpole® housings and contacts are sold separately. See page 20 for ordering information. SECTION 2 Powerpole® Pak A Retaining Pin [ 53.09 ] 2.09[ 21.59 ] 0.85 [ 49.28 ] 1.94 Side View Top View For all other plug shells is 0.63 inches [ 16.0 mm²]. Side View Top View C D B Retaining Pin [ 21.59 ] 0.85 NOTE: Retaining pins are used to secure and position Powerpoles® in one of three positions in plug shells. Plug Shell with Latch Can mate inline with other plug shells without latches, or mate to a panel mount receptacle. For use with Powerpole ® wire connectors only. Cable Clamp and Hardware Pak or Retaining Pins must be ordered seperately. Dimensions - B - - C - - D -

www.andersonpower.com - 24 - All Data Subject To Change Without Notice SECTION 2 Powerpole® Pak Plug Shell With Latch Shown Shell, housing and contacts are sold separately. Retaining Pin Conduit Clamp With Screws Retaining Pin [ 27.94 ] 1.10 [ 1.78 ] 0.07 [ 19.56 ] 0.77 E NOTE: Retaining pins are used to secure and position Powerpoles® in one of two positions in receptacle shells. Retaining Pin Cable Clamp With Screws Shell, housing and contacts are sold separately. Plug Shell Without Latch Shown Shell and housing are sold separately. Clamp Retaining Pins Screws NEW NEW Plug Shell with Latch & Non-Conductive Strain Relief New 2X3 Powerpole Pak offers an improved ergonomic shell for easier latch operation as well as a plastic, non-conductive strain relief. The new strain relief can accommodate up to a 6 conductor #10 AWG cable. Can mate to a panel mount receptacle. For use with Powerpole® wire connectors only. Cable Clamp and Hardware Pak or Retaining Pins must be ordered separately. To be used with 115G23 cable clamp only. Minimum Quantity 1,000 25 ... Black, 5-6 Poles 1460G23-BK 1460G23 Snap-in Receptacle Shell Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below separately. Number of Dimensions Knock Out Size Retaining Pins - E - - Width - Black, 2-4 Poles 1470G1-BK - 1470G1 1 1.50 38.10 1.25 31.75 Black, 5-6 Poles - 1470G2-BK 1470G2 2 1.88 47.75 1.62 41.15 Black, 7-8 Poles - 1470G3-BK 1470G3 3 2.13 54.10 1.88 47.75 Black, 9-10 Poles - 1470G4-BK 1470G4 4 2.44 61.98 2.19 55.63 * Height = [25.4 mm] 1.0 in. Cable Clamp & Hardware Pak Includes cable clamp, 2 screws, and required amount of retaining pins for each configuration. Screw Head Cable 2-4 Poles Straight Slot Bundled 115G1-BK - 115G1 5-6 Poles Straight Slot Bundled 115G2-BK - 115G2 7-8 Poles Straight Slot Bundled 115G3-BK - 115G3 9-10 Poles Straight Slot Bundled - 115G4-BK 115G4 2-4 Poles Philips Bundled 115G7-BK - 115G7 5-6 Poles Philips Bundled 115G8-BK - 115G8 Cable Clamp & Hardware Pak Includes 2 cable clamp halfs, 2 screws and 2 retaining pins. To be used with 1460G23 Plug Shell only. Screw Head Cable Minimum Quantity ….…… 1,000 25 5-6 Poles Philips Bundled 115G23-BK 115G23 Flexible Conduit Clamp & Hardware Pak Includes cable clamp, 2 screws, and need amount of retaining pins for each configuration. Description - Part Number - 2-4 Poles 110G10 Retaining Pin for Snap-in Receptacle Order the number of retaining pins for each receptacle shown in the Snap-in Receptacle Shell ordering information. Pins are also required for the plug side when the Cable Clamp & Hardware Pak is not ordered. Retaining Pin 110G9-BK 110G9 NOTE: Max wire O.D. for 1460G23 is 0.80 inches [20.3 mm²]. [ 81.5 ] 3.21 [ 26.1 ] 1.03 [ 51.4 ] 2.02 [ 73.5 ] 2.90 [ 21.5 ] 0.85

www.andersonpower.com - 25 - All Data Subject To Change Without Notice [ 102.2 ] 4.03 [ 86.2 ] 3.39 [ 85.8 ] 3.38 [ 53 ] 2.09 [ 43.2 ] 1.70 [ 51.1 ] 2.01 Blindmate Pak Connector Ideal for panel to panel, bulkhead to bulkhead, or rack mount applications that require the power connector to compensate for up to 0.45 in. [11.43 mm] of misalignment in either axis. Eight positions can be filled with Powerpole ® 10-45 connectors. The receptacle side can be used with wire or PCB contacts. Hardware bag includes retaining pins. 2x4 Blindmate Plug Shell, Hardware & Pins - BMPP10-45P 2x4 Blindmate Receptacle Shell, Hardware & Pins - BMPP10-45R 2x4 Blindmate Plug Shell BMHSG-P - 2x4 Blindmate Receptacle Shell BMHSG-R - Hardware Bag Plug Side - 110G50 Hardware Bag Receptacle Side - 110G51 “T” Pak 2 Way Splitter The Powerpole® “T” Pak connector is a 2 way electrical splitter that splits electrical current from one incoming circuit into two outgoing circuits. The standard configuration is pre-wired for AC 3 phase, 3 wire plus ground configurations. The “T” Pak can also be used for AC single phase plus ground or DC 2 wire plus ground applications by not using either the red or white power positions. “T” Pak is pre-wired from the factory allowing plug and play field installation of modular office and industrial equipment. UL recognition up to 20 amps and 600 volts is achieved when mating Powerpole ® Pak plugs are used with #12 AWG wire. For OEM manufacturing scale applications, the “T” Pak can be loaded with custom configurations of any of APP ®’s finger proof, standard, or ground housings and contacts in the PP15-45 series. Contact APP® sales or customer service for additional information. Description - Part Numbers - Assembled “T” Pak 20-01 Mating Plug Shell with Latch 2x2 26-01 Mating Plug Shell without Latch 2x2 27-01 Standard configuration for each side of the T includes (1) each Red, Black, and White Standard PP 15-45 Housings & 261G2-LPBK contacts with (1) 45A Green Premate Ground Housing and 1830G1-LPBK contact. Mating plug shells include (1) each Red, Black, and White Standard PP 15-45 Housings & (3) 261G2-LPBK contacts with (1) 45A Green Premate Ground Housing and 1830G1-LPBK contact. Cable clamp & hardware pak also included. [ 88.6 ] 3.49[ 76.4 ] 3.01 [ 5.0 ] Ø 0.20 4 [ 38.6 ] 1.52 [ 58.93 ] 2.320 [ 24.38 ] 0.960 [ 13.46 ] 0.530[ 3.05 ] 0.120 [47.24] 1.860 [ 36.7 ] 1.45 [ 50.8 ] 2.00 Plug Outline Receptacle Outline [ 30.2 ] 1.19 [21.5] 0.85 [4.4] 0.17 [ 29.14 ] 1.147 [ 36.7 ] 1.45 [ 0.64 ] 0.025 [ 0.64 ] 0.025 A B C SECTION 2 Powerpole® Pak Mates With B Mates With A & C 27 - 01 26 - 01 See APP ®’s innovative MARC Connector that offers straight-on or rotational blindmate capability. MARC holds 6 PP15/45 power contacts and 2 PP15/45 premate ground contacts in a high temperature housing. Visit our website, www.andersonpower.com to learn more.

www.andersonpower.com - 26 - All Data Subject To Change Without Notice | PP15-45 & POWERPOLE® PAK SPECIFICATIONS | SECTION 2 Powerpole® PP15 to 45 Electrical Current Rating Amperes¹ UL 1977 CSA/TUV Singlepole Wire to Wire (10 AWG) 55 40 Singlepole Ground Wire to Wire or PCB (10 AWG) 45 35 3x3 Block Wire to Wire (10 AWG) 40 27 Singlepole 25A PCB to Wire (12 AWG) 25 - 2x3 Block 25A PCB to Wire (12 AWG) 25 22 * Singlepole 45A PCB to Wire (10 AWG) 45 40 * 2x3 Block 45A PCB to Wire (10 AWG) 45 25 * Voltage Rating AC/DC UL 1977 600 PCB Connector Recommended Voltage³ per IEC 60950-1 Table 2L Pollution Degree 25A Contacts Adjacent Poles 495 25A Contacts Separated by Spacer 1,000 45A Contacts Adjacent Poles 160 45A Contacts Separated by Spacer 970 Dielectric Withstanding Voltage Volts AC 2,200 Avg. Mated Contact Resistance Milliohms¹ 15A Wire Contact with 5/8” of #16 AWG 0.875 30A Wire Contact with 5/8” of #12 AWG 0.600 45A Wire Contact with 5/8” of #10 AWG 0.525 45A PCB Contact to Contact 0.500 25A PCB Contact to Contact 0.600 UL Hot Plug Current Rating Amperes 250 cycles at 72V DC 45A 250 cycles at 120V DC 30A UL Ground Short Time Current Test - 45A Premate Ground

750 Amps, #10 AWG Wire 4 Seconds

470 Amps, #12 AWG Wire 4 Seconds

Wire Size Range AWG mm² 20 to 10 0.75 to 6.0 Max. Wire Insulation Diameter in. mm 0.175 4.450 Operating Temperature² °F °C Powerpole ® Housings & Powerpole® Pak Shells -4° to 221° -20° to 105° Mating Cycles No Load by Plating Silver (Ag) Tin (Sn) PCB to Wire - 1,500 Wire to Wire 10,000 1,500 Avg. Mating / Unmating Force Lbf. N Low Force Wire, High Force PCB, & Ground 3 13 High Force Wire 5 22 Low Force PCB 2 9 Min. Contact / Spring Retention Force Lbf. N 20 90 Powerpole ® Pak Latch Avg. Defeat Force Lbf. N 150 667 PCB Specifications Mounting Style Plated Through Hole 25A PCB Recommended Traces #12 AWG Cross Section 45A PCB Recommended Traces #10 AWG Cross Section Min. Creepage / Clearance Distance PCB in. mm 25A Creepage & Clearance Adjacent Poles 0.201 5.1 45A Creepage & Clearance Adjacent Poles 0.067 1.7 Mechanical Shock MIL-STD-202 213 Condition A 50g’s Vibration High Frequency 4 MIL-STD-202 204 Condition A 10g’s Materials Housing Plastic Resin Polycarbonate Contact Retention Spring Stainless Steel Housing Flammability Rating UL94 V-0 Contact Base Copper Alloy Plating Tin or Silver Contact Termination Methods Crimp³ Wire Contacts Hand Solder 1331, 1332 & PCB Contacts Solder Dip PCB Contacts Wave Solder PCB Contacts Protection Touch Safety with Finger Proof Housings & Wire Contacts or PCB Mating Interface UL1977 Sec. 10.2 Pass IEC 60950 Pass IEC 60529 IP20 Touch Safety Standard Housings IEC 60529 IP10 * No TUV Recognition

1 Based on: 105°C rated or better cable of the largest size, Properly calibrated APP®

recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30°C temperature rise. 2 Limited by the thermal properties of the connector plastic housing. 3 Use APP® recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition. 4 Tested with contact part number 261G2.

www.andersonpower.com - 27 - All Data Subject To Change Without Notice | PP15-45 TEMPERATURE CHARTS | 100 125 0 5 10 15 20 25 30 35 40 PP25 PCB Derating vs. Ambient Temperature Temperature (°C) Amperes Applied Singlepole 2-Pole Multipole PP45 PCB Derating vs. Ambient Temperature 100 125 0 10 20 30 40 50 60 70 Temperature (°C) Amperes Applied Singlepole 2-Pole Multipole PP15-45 Singlepole Derating vs. Ambient Temperature 100 125 0 10 20 30 40 50 60 70 Amperes Applied Temperature (°C)

10 AWG 12 AWG 14 AWG

16 AWG 18 AWG 20 AWG

Derating vs. Ambient Temperature Amperes Applied Temperature (°C) Powerpole® PP15 to 45 0 10 20 30 40 50 60 PP15-45 Singlepole Temperature Rise at Constant Current Amperes Applied Temperature (°C) Temperature Rise at Constant Current Amperes Applied Temperature (°C) Temperature Rise at Constant Current Temperature (°C) Amperes Applied Singlepole 2-Pole Multipole 0 10 20 30 40 50 60 PP45 PCB Temperature Rise at Constant Current Temperature (°C) Amperes Applied Singlepole 2-Pole Multipole NOTE: Temperature rise charts are based on a 25°C ambient temperature. PP25 PCB charts based on 0.002 in² foil on board side, mated to #12 AWG conductor on wire side. PP45 PCB charts based on #10 AWG equivalent copper foil on board side, mated to #10 AWG conductor on wire side.

www.andersonpower.com - 28 - All Data Subject To Change Without Notice | Powerpole® 15-45 Accessories | [ 16.6 ] 0.655 [ 7.9 ] 0.312 [ 4.6 ] 0.180 Mounting Wings [ 16.6 ] 0.655 [ 7.9 ] 0.312 [ 24.6 ] 0.968 [ 7.9 ] 0.312 [ 16.6 ] 0.655 [ 7.9 ] 0.312 Short with Hole Short without Hole Long 2 or 4 Pole 3 or 6 Pole 4 or 8 Pole A B SECTION 2 Powerpole® PP15 to 45 Mounting Wing Secure dovetailed Powerpole ® 15-45 series housings by passing fasteners through the wings in either a horizontal or vertical orientation. Useful for sheet metal panels, printed circuit boards, and many other mounting surfaces. Fasteners not included. Red 1399G9-BK 1399G9 Blue 1399G8-BK 1399G8 Spacer Used to separate housings under high power to minimize derating. They are recommended for squaring off a block of Powerpole® 15-45 housings for use in connector shells and mounting clamps. Use a combination of long and short spacers opposite each other in a mated block to add keying features or use two short spacers to avoid interference. Spacers with holes can also be used to fasten the blocked housings to a surface with a fastener. Red, Short w/ Hole 1399G1-BK 1399G1 Red, Long 1399G2-BK 1399G2 Red, Short 1399G6-BK 1399G6 Black, Long 1399G10-BK 1399G10 Blue, Short 1399G13-BK 1399G13 White, Short w/ Hole 1399G14-BK 1399G14 White, Long 1399G17-BK 1399G17 Retaining Pins Keep stacked Powerpole ® 15-45 series housings from separating. Retaining pins are inserted in the circular opening between two housings stacked side by side. Dimensions - A - - B - Description ----- Part Numbers ----- inches mm inches mm 1 Block High H1507P38 110G16 0.094 2.390 0.250 6.350 Mounting Clamp Mounting clamps can be used for fastening a block of Powerpole ® 15-45 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included. Description -- Part Numbers -- 2 or 4 Pole 1462G1 3 or 6 Pole 1462G2 4 or 8 Pole 1462G3

www.andersonpower.com - 29 - All Data Subject To Change Without Notice A B

2 Pole 4 Pole

Powerpole® PP15 to 45 For environmentally sealed connector shells to hold Powerpole ® 15-180 connectors, see APP ®’s SPEC Pak ® product series on our website, www.andersonpower.com PCB Mounting Staples PCB staples are soldered into place to secure Powerpole ® 15-45 series housings in a horizontal configuration to the board. Reduce strain on soldering joints during mating and unmating. Dimensions Part - A - - B - Numbers H x W Length inches mm inches mm 114555P1 1 x 1 Short 0.47 12.0 0.28 7.0 114555P2 1 x 2 Short 0.47 12.0 0.57 14.5 114555P3 1 x 3 Short 0.47 12.0 0.89 22.5 114555P7 1 x 4 Short 0.47 12.0 1.20 30.5 114555P12 1 x 4 Long 0.67 17.0 1.20 30.5 114555P8 1 x 6 Short 0.47 12.0 1.83 46.5 114555P10 2 x 1 Short 0.79 20.0 0.28 7.0 114555P6 2 x 2 Short 0.79 20.0 0.57 14.5 114555P9 2 x 2 Long 0.91 23.0 0.57 14.5 114555P14 2 x 5 Long 0.91 23.0 1.52 38.5 114555P4 3 x 2 Short 1.10 28.0 0.57 14.5 Retention Clip Retention clips prevent Powerpole® 15-45 blocks from unintended disconnects. They feature a tab for easy insertion and removal. Description -- Part Number --

1 Block High 110G68

Block locks secure mated Powerpole® 15-45 series housings together. For use in high vibration or shock applications where connectors are unmated infrequently. Description - Part Numbers -

2 Pole, Black 110G21

4 Pole, Black 110G12

Splash boots protect a 2x2 block of any combination of Powerpole® 15-45 series housings and feature snip off sealed ends for flexibility in wire O.D. Designed for through panel or inline applications. Not a hermetic seal. Description - Part Numbers - Female, Black 1441G1 Male, Black 1442G1 Shown without Powerpoles ® Shown with Powerpoles® 15693, DS-PP15/45 REV C4.3

www.andersonpower.com - 43 - All Data Subject To Change Without Notice Powerpole® - Tooling Information SECTION 2 Powerpole® Tooling #16 / 20 1.3 / 0.52 262G1 262G2 1385519-1 #16 / 20 1.3 / 0.52 269G2 N/A 1385519-1 #12 / 16 3.3 / 1.3 261G1 261G4 1385520-1 #10 / 14 5.3 / 2.1 261G2 261G3 1385458-1 #12 / 16 3.3 / 1.3 269G1 N/A 1385520-1 #10 / 14 5.3 / 2.1 269G3 N/A 1385458-1 #10 / 14 5.3 / 2.1 200G1L 200G3L 1385460-1 #10 / 14 5.3 / 2.1 201G1H 201G3H 1385460-1 #10 / 14 5.3 / 2.1 1830G1 1830G2 1385460-1 TD0101 115V= TE0101 230V = TE0102 1725900-2 or [354500-1] 1424266-1 or [354578-1] TD0102 AWG mm² Reeled Part Numbers Tin Plating Silver Plating APP Applicator ATS Applicator ATS Press Air Feed Kit * Wire Size Reeled Contact Crimp Tool PP15 / 45 Flat Wiping Power & Ground APP Press NOTE: Insertion / Extraction tool for PP15/45 contacts = 111038G2 AWG mm² Loose Piece Part Numbers Tin Plating Silver Plating Hand Tool Die Locator Number of Crimps Wire Size or Pneumatic Bench Tool Loose Piece Contact Crimp Tool #16 / 20 #12 / 16 #16 / 20 #16 / 20 #12 / 16 #10 / 14 #12 / 16 #10 / 14 #10 / 14 #10 / 14 1.3 / 0.52 N/A 1332 3.3 / 1.3 N/A 1331 1.3 / 0.52 262G1-LPBK 262G2-LPBK 1.3 / 0.52 269G2-LPBK N/A 3.3 / 1.3 261G1-LPBK 261G4-LPBK 5.3 / 2.1 261G2-LPBK 261G3-LPBK 3.3 / 1.3 269G1-LPBK N/A 5.3 / 2.1 269G3-LPBK N/A 5.3 / 2.1 200G1L-LPBK 200G3L-LPBK 5.3 / 2.1 201G1H-LPBK 201G3H-LPBK 5.3 / 2.1 1830G1-LPBK 1830G2-LPBK #8 8.4 1/0 53.5 1323G2 #1 42.4 1323G1 #2 33.6 1319 #4 21.2 1319G4 #6 13.3 1319G6 3/0 85 1328G2 1303G12 2/0 53.5 1328G1 1303G13#1 42.4 1347 #6 13.3 1348 1387G1 1388G4 1389G3 Single 1. NOTE: See website for the most current information. 2. NOTE: Insertion / Extraction fool for PP15/45 contacts = 111038G2 Double 1309G2 or 1309G8 1367G1 N/A 1309G3 or 1309G8 1309G6 or 1309G8 Single1387G1 1388G6 N/A SingleN/A #6 13.3 1309G4 #10 / 12 5.3 / 3.3 N/A N/A 1368 Series 1387G1 1387G2 1388G4 1389G4 1388G3 1304G32 1/0 53.5 1382 N/A 1368 Series Single 1388G7 33.6 1383 #4 21.1 1384 or + + * All ATS applicators for APP® contacts are air feed style, (except 1385870) and require the press to have an air feed kit installed. APP applicators are mechanical feed style and do not require an air feed kit. PP180 PP120 PP75 PP15 / 45 Flat Wiping Power & Ground 1307 5900 1875G1 5952 1875G2 5953 5915 1875G3 1389G21 1389G6 1389G21 1389G6 1389G21 1389G6