PO023OX1 AZDISPLAYS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 20
Technical content
The information contained herein is the exclusive property of Prime View In ternational Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part w ithout prior written permission of Prime View International Co., Ltd. Page:1 Version£º2.0 TECHNICAL SPECIFICATION MODEL NO. : PO023OX1 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information Customer¡¯s Confirmation Customer Date By PVI¡¯s Confirmation Confirmed By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
Http://www.AZDISPLAYS.com
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2
Revision History
R e v . Is s u e d D a te E n g in e e r R e v is e d C o n te n ts 1.0 Apr. 01, 2008 吳昌霖 New 2.0 Aug. 21, 2009 吳昌霖 Depend on ECN200907022 to modify packing drawing
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 TECHNICAL SPECIFICATION
CONTENTS
NO. ITEM PAGE - Cover 1 - Revision History 2 - Contents 3
1 Application 4
2 Features 4
3 Mechanical Specifications 4
4 Mechanical Drawing of TFT-LCD module 5
5 Input / Output Terminals 6
6 Absolute Maximum Ratings 7
7 Electrical Characteristics 8
8 Pixel Arrangement 9
9 Block Diagram 9
10 Timing specification 10
11 Interface specification 12
12 Optical Characteristics 14
13 Handling Caution 17
14 Reliability Test 19
15 Packing 20
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 1. Application： The PO023OX1 applies to a color TFT LCD module which has octagonal outline. PO023OX1 module applies to OA product, GPS, which require high quality flat panel display. If you must use in high reliability environ ment can’ t over reliability test condition. 2. Features： . Pixel in stripe configuration . Slim and compact . Wide viewing angle . High Brightness . Octagonal LCD . Driver IC：HX8325 3. Mechanical Specifications： Parameter Specifications Unit Screen Size 2.3” TFT LCD inch Display Format 240×(R, G, B)×240 dot Display Colors 65,536 Active Area D = 57.96 (Circular) mm Pixel Pitch 0.2415×0.2415 mm Pixel Configuration Stripe Outline Dimension 75.60(W)×75.70(H)×7.64(D) mm Weight 46±5 g Surface treatment Anti-glare and wide-view film Back Light 2-LED,150mA Display mode Normally white Gray scale inversion direction 6 [Refer to Note 12-1] o’ clock
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 4. Mechanical Drawing of TFT-LCD Module：
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 5. Input / Output Terminals： LCD Module Connector FPC Down Connect, 30 Pins Pin No. Signal Pin Function Remark
1 VSS Ground
2 VSS Ground
3 NRESET Reset Input Pin
4 Dummy N.C.
5 D15 Parallel Data Bus (R4)
6 D14 Parallel Data Bus (R3)
7 D13 Parallel Data Bus (R2)
8 D12 Parallel Data Bus (R1)
9 D11 Parallel Data Bus (R0)
10 D10 Parallel Data Bus (G5)
11 D9 Parallel Data Bus (G4)
12 D8 Parallel Data Bus (G3)
13 D7 Parallel Data Bus (G2)
14 D6 Parallel Data Bus (G1)
15 D5 Parallel Data Bus (G0)
16 D4 Parallel Data Bus (B4)
17 D3 Parallel Data Bus (B3)
18 D2 Parallel Data Bus (B2)
19 D1 Parallel Data Bus (B1)
20 D0 Parallel Data Bus (B0)
21 Dummy N.C.
22 NRD_E Read Signal Pin
23 NWR_RNW Write Signal Pin
24 DNC_SCL Register Index or Register Command Select
25 NCS Chip Select Pin
26 Dummy N.C. 27 VCI Power Supply (Typ. 3.0V) 28 VCI Power Supply (Typ. 3.0V)
29 VSS Ground
30 VSS Ground
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 6. Absolute Maximum Ratings： The followings are maximum values, which if exceeded, may cause faulty operation or damage t o t h e u n i t . VSS=GND=0V , Ta = 25℃ Item Symbol Value Unit Remark Power supply voltage (1) VCC, IOVCC -0.3 to +4.6 V Note 6-1 Note 6-2 Power supply voltage (2) VCI -0.3 to +4.6 V Note 6-1 Note 6-3 Power supply voltage (3) VLCD-VSSA -0.3 to +6.5 V Note 6-1 Note 6-4 Power supply voltage (4) VSSA-VCL -0.3 to +4.6 V Note 6-1 Note 6-5 Drive Supply Voltage VGH-VGL 32 V Note 6-1 Note 6-6 Input Voltage Range VIN -0.3 to IOVCC+0.3 V Note 6-1 Output Voltage Range VO -0.3 to IOVCC+0.3 V Note 6-1 Note 6-1：VCC,VSSD must be maintained, VSSD=VSSA=0V Note 6-2：Make sure VCC≧VSSD, IOVCC≧VSSD Note 6-3：Make sure VCI≧VSSA Note 6-4：Make sure VLCD≧VSSA Note 6-5：Make sure VSSA≧VCL Note 6-6：Make sure VGH≧VSSA and VSSA≧VGL
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 7. Electrical Characteristics： 7-1 Operation condition： VSS=GND=0V , Ta = 25℃ Item Symbol Value Unit Remark Power supply voltage (1) VCI-VSS 3±0.2 V Note 7-1 Power supply voltage (2) VLCD-VSS 4.63 V Power supply voltage (3) VSS-VCL 2.67 V Power supply voltage (4) VLCD-VCL 7.3 V Power supply voltage (5) VGH-VSS 13.7 V Power supply voltage (6) VSS-VGL 10.21 V VCOMH 3. 6 V TFT Common Electrode Voltage VCOML -0.71 V Note 7-2 Coupling voltage Δ Vp 0.82 V Black of Video Low Voltage VLB 0.24 V Black of Video High Voltage VHB 4.24 V White of Video Low Voltage VLW 0.2 V White of Video High Voltage VHW 4.18 V Note 7-3 Note 7-1：The VCI 3±0.2V is base on item 11-2 setting, if out of range, will be have some display abnormal Note 7-2：VCOM must be adjusted optimize display quality, cross talk, contrast ration and etc. Note 7-3：
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 7-2 Power consumption： Parameter Symbol Min TYP MAX Unit Remark Supply voltage of LED backlight VLED - - (7.6) V Note 7-4 Supply current of LED backlight ILED - 150 - mA Note 7-5 Backlight Power Consumption PLED - - 1140 mW Note 7-6 Note 7-4：The ILED=150 mA (Constant current) Note 7-5：LED B/L applied information Note 7-6：PLED = VLED* ILED Parameter Symbol Conditions TYP. MAX. Unit Remark Supply current for source driver and gate driver ICI VCI ＝3.0V 11.7 17.6 mA Backlight Power Consumption PLED - - 1140 mW Total power consumption - - - 1192.8 mW 8. Pixel Arrangement：
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 9. Block Diagram： D15~D0 16
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 10. Timing specification： 10-1. 80-system Bus Operation： 10-2. AC Characteristics： 10-2.1 80-system Bus Interface Timing Characteristics： Table.10-2.1 80-System Normal Write Mode (HWM =0)/ (VCI=3V)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 11. Interface specification： 11-1. 16-bit bus interface： T h e 8 0 - s y s t e m 1 6 - b i t b u s p a rallel data transfer can be used by setting M3-0 pins to “ 0010” . Figure.11-1-2 A Example of 80-System 16-bit Interface Figure.11-1-2 B Data Format of 16-bit bus System Interface
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 11-2. Display on Flow：
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 12. Optical Characteristics： Ta=25℃ Parameter Symbol Condition MIN. TYP. MAX. Unit Rem arks Horizontal Ө11、Ө12 70 75 - deg Ө22 45 50 - deg Viewing Angle Vertical Ө21 CR≥ 10 65 70 - deg Note 12-1 Contrast Ratio CR At optimized view angle 200 400 - - Note 12-2 Brightness L θ =0° 800 1000 cd/㎡ Note 12-4 Uniformity U% θ =0° 70 75 - % Note 12-5 Rise Tr - 15 20 ms Response time Fall Tf θ= 0 ° - 20 30 ms Note 12-3 x 0.29 0.33 0.37 - White Chromaticity y θ= 0 ° 0.31 0.35 0.39 - LED Life Time - +25℃ 20000 30000 - hrs Note 12-6 Note 12-1: The definitions of viewing angles are as follow Ө12 Ө22 Ө11 Ө21
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 Note 12-2: The definition of contrast ratio： PatternBlack at Luminance Pattern at White LuminanceCR = Note 12-3: Definition of Response Time Tr and Tf： 100% 90% 10% White White Brightness Black Tr Tf Note 12-4: All optical measurements shall be performed after ba cklight being turned-on for 30 mins. The optical characteristics shall be mea sured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) Field = 1° 500 mm +/- 50 mm TFT-LCD Optical characteristics measuring configuration
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 Note 12-5：The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points Luminance meter：BM-5A or BM-7 fast (TOPCON) Measurement distance：500 mm +/- 50 mm Ambient illumination：< 1 Lux Measuring direction：Perpendicular to the surface of module The test pattern is white. Note 12-6 ： The “ LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25℃ an d ILED = 150mA.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 13. Handling Cautions： 13-1) Mounting of module ： a) Please power off the module when you connect the input/outpu t connector. b ) P o l a r i z e r w h i c h i s m a d e o f s o f t m a t e r i a l a n d s u s c e p t i ble to flaw must be handled carefully. c ) P r o t e c t i v e f i l m ( L a m i n a t o r ) i s a p p l i e d o n s u r f a c e t o p r otect it against scratches and dirt. d ) Please following the tear off direction as fi gure 13-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) Precautions in mounting ： a) When metal part of the TFT-LCD module (shielding lid and rea r case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c ) T F T - L C D m o d u l e u s e s g l a s s w h i c h b r e a k s o r c r a c k s e a s i l y if dropped or bumped on hard surface. Please handle with care. d ) S i n c e C M O S L S I i s u s e d i n t h e m o d u l e . S o t a k e c a r e o f static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been s et optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted va lues are changed, the specifications described may not be satisfied. 13-4) Others： a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b ) S t o r e t h e m o d u l e a t a r o o m t e m p e r a t u r e place. A s o p e n t h e p a c k i n g , m u s t a s s e m b l y w i t h i n 3 m o n t h c ) T h e v o l t a g e o f b e g i n n i n g e l e c t r i c d i s c h a r g e m a y o v e r the normal voltage because of leakage current from approach conductor by to draw l ump read lead line around. d ) I f L C D p a n e l b r e a k s , i t i s p o s s i b l y t h a t t h e l i q u i d c rystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e ) O b s e r v e all other precautionary requirements in handling general electronic components. 13-4) Polarizer mark： The polarizer mark is to describe the direction of wide view an gle film how to mach up with the rubbing direction.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 Figure 13-1 the way to peel off protective film
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 14. Reliability Test： No Test Item Test Condition Remark
1 High Temperature Storage Test Ta = 85℃, 240 hrs
2 Low Temperature Storage Test Ta = -40℃, 240 hrs
3 High Temperature Operation Test Ta = 80℃, 240 hrs
4 Low Temperature Operation Test Ta = -30℃, 240 hrs
5 High Temperature & High
Ta = 60℃, 95%RH, 240 hrs (No Condensation)
6 Thermal Cycling Test
(non-operating) -30℃ Æ +80℃, 200 Cycles 3 0 m i n s 3 0 m i n s
7 Vibration Test
(non-operating) Frequency : 10 ~ 55 HZ Amplitude : 1 mm Sweep time : 11 mins Test Period : 6 Cycles for each direction of X, Y, Z
8 Shock Test
(non-operating) 100G , 6ms Direction : ±X , ±Y , ±Z Cycle : 3 times
9 Electrostatic Discharge Test
(non-operating) 200pF , 0Ω ±200V 1 time / each terminal Ta：ambient temperature [Criteria] In the standard conditions, there is not display function NG is sue occurred. (including：line defect ,no image)All the cosmetic specification is judged before the reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or discl osed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 15. Packing： 抗靜電 抗靜電 抗靜電摺口袋 450*380*700mm 需180交叉堆疊，疊堆後可從側邊檢視圓弧防 呆方向是否正確