PN4117A NJSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

J*>z.ml-(2onctu.ctoi ^Products, One. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. PN4117A TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 N-Channel Switch

  • This device is designed for low current DC and audio application. These devices provide excellent performance as input stages for sub- picoamp instrumentation or any high impedance signal sources.
  • Sourced from process 53. Absolute Maximum Ratings * TA=25°C unless otherwise noted TO-92 1. Drain 2. Source 3. Gate Symbol VDG VGS IGF TSTG Parameter Drain-Gate Voltage Gate-Source Voltage Forward Gate Current Operating and storage Temperature Range Value -40 -55- 150 Units V V mA * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired NOTES: 1. These ratings are based on a maximum junction temperature of 150degrees C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations Electrical Characteristics TA=25°C unless otherwise noted Symbol Parameter Test Condition Min. Typ. Max. Units Off Characteristics V(BR)GSS VGS(off) IGSS Gate-Source Breakdown Voltage Gate-Source Cutoff Voltage Gate Reverse Current VDS = 0, !G = -1uA VDS = -10V, ID = 1.0nA VDS = 0V, VGS = -20V -40 -0.6 -1.8 -1.0 V V PA On Characteristics DSS Zero-Gate Voltage Drain Current * ;=10V, VGS = < Small Signal Characteristics gfs 9oss RE(YFS) C|SS Wss Common Source Forward Transconductance Common Source Output Conductance Common Source Forward Conductance Input Capacitance Reverse Transfer Capacitance VDS = 10V, VGS = 0 f= 1.0KHz VDS = 10V, VGS = 0 f = 1KHz VDS = iov, VGS = 0 f = 30MHz VDS = 10V, VGS = 0 f= 1.0KHz VOS=10V, VGS = 0 f= 1.0MHz 210 3.0 3.0 1.5 mmhos mmhos mmhos pF pF
  • Pulse Test: Pulse Width < 300ns, Duty Cycle < 1.0% Thermal Characteristics TA=25°C unless otherwise noted Symbol PD Rejc RGJA Parameter Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Max. 350 2.8 125 357 Units mW mW/°C °C/W °C/W NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to.be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors

TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 TO-92 (92,94,96) ~z. B E B C F D S G B E C B F D G S B B E C F S D G 0.185 0.170 0.185 ' 0.170 i 0.030 [ 0.014 [ 00.060 [0 0.010 [0.2 DEEP 0.055 0.045 0.175 0.150 4.70 | L4-j2J ' ?:5SH;/* .52]^ 54] T4.451 I [3,81 J-(- 1 n

  • 1 inr-- fc <r>c\\ mo — »- 2.0'TYP.

00 L I

-- °r ^ 4- i_ t [ 0,615 0.570 0.020 fc — 0.014 [C J 5.0'TYP. 15.61 1 14.47 .511 .36j , 0.060 — 0.040 0.180 ' " 0.165 m o CM O d 0.019 — 0.012 [!: 4.56 4.18 1.48 ).30 0.095 2.41 0.084 2.13 J