PNZ107 PANASONIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
High sensitivity : ICE(L) = 5 mA (min.) (at L = 100 lx) Narrow directional sensitivity for effective use of light input Fast response : tr = 5 µs (typ.) Signal mixing capability using base pin (PNZ0108) TO-18 standard type package PNZ107, PNZ108 (PN107, PN108) Silicon NPN Phototransistors For optical control systems Phototransistors Glass lens 6.3 0.3 1: Emitter 2: Collector Unit : mm 1.0 0.2 1.0 0.15 4.6 0.15 2.54 0.25 5.75 max. 2- 0.45 0.05 12.7 min. Glass lens 6.3 0.3 1: Emitter 2: Base 3: Collector Unit : mm 1.0 0.2 1.0 0.15 4.6 0.15 2.54 0.25 5.75 max. 3- 0.45 0.05 12.7 min. PNZ107 PNZ108 Note) The part numbers in the parenthesis show conventional part number.
Electro-Optical Characteristics (Ta = 25˚C) Parameter Symbol Conditions min typ max Unit Dark current I CEO V CE = 10V 0.05 2 µA Collector photo current I CE(L) V CE = 10V , L = 100 lx*1 51 5 m A Peak sensitivity wavelength λP V CE = 10V 900 nm Acceptance half angle θ Measured from the optical axis to the half power point 10 deg. Rise time t r*2 V CC = 10V , ICE(L) = 5mA 5 µs Fall time t f*2 R L = 100Ω 6 µs Collector saturation voltageV CE(sat) ICE(L) = 1mA, L = 500 lx*1 0.3 0.6 V *1 Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source. *2 Switching time measurement circuit Phototransistors PNZ107, PNZ108 PC — Ta 200 160 120 Ambient temperature Ta (˚C ) Collector power dissipation PC (mW) 0 2 04 06 08 0 1 0 0 – 20 Ta = 25˚C T = 2856K ICE(L) — V CE Collector to emitter voltage VCE (V) Collector photo current ICE(L) (mA) 02 0 1681 242 4 ICE(L) — L 10 3 10 2 Illuminance L (lx) Collector photo current ICE(L) (mA) 10 10 2 10 3 10 –1 V CE = 10V Ta = 25˚C T = 2856K L = 1000 lx 500 lx 300 lx200 lx 100 lx 50 lx 10 lx /;/; /;/; /; 50Ω R L td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) t f : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value) V CC Sig.OUT Sig.IN (Input pulse) (Output pulse) 10% 90% td tr tf
PNZ107, PNZ108 Phototransistors 0˚ 10˚ 20˚ 30˚ 40˚ 50˚ 60˚ 70˚ 80˚ 90˚ Directivity characteristics ICEO — Ta 10 2 10 –1 10 –2 Ambient temperature Ta (˚C ) V CE = 10V Dark current ICEO (µA) 10 –3 – 20 0 40 80 20 60 100 ICE(L) — Ta 10 2 Ambient temperature Ta (˚C ) V CE = 10V L = 100 lx T = 2856K Collector photo current ICE(L) (mA) – 40 0 40 80 120 Spectral sensitivity characteristics 100 Wavelength λ (nm) Relative sensitivity S (%) 400 600 800 1000 1200 200 V CE = 10V Ta = 25˚C tr — ICE(L) Collector photo current ICE(L) (mA) Rise time tr (µs) V CC = 10V Ta = 25˚C10 4 10 3 10 2 10 –1 10 –1 10 10 2110 –2 tf — ICE(L) Collector photo current ICE(L) (mA) Fall time tf (µs) V CC = 10V Ta = 25˚C10 4 10 3 10 2 10 –1 10 –1 10 10 2110 –2 100 Relative sensitivity S(%) R L = 1kΩ 500Ω 100Ω R L = 1kΩ 500Ω 100Ω
Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may ap- pear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Govern- ment if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative character- istics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or gen- eral electronic equipment (such as office equipment, communications equipment, measuring in- struments and household appliances). Consult our sales staff in advance for information on the following applications:
- Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
- Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchas- ing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage and heat radiation characteristics. Other- wise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.