PMXXX

PMXXX CONNOR-WINFIELD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation

2111 Comprehensive Drive

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com 5x7mm Surface Mount LVPECL Clock Oscillator Description: The Connor-Winfield PMxxx - Series are 5x7mm Surface Mount, LVPECL, Fixed Frequency Crystal Controlled Oscillator (XO). The PMxxx - Series are designed for applications requiring tight frequency stability, wide temperature range, and low jitter. Operating at 2.5 or 3.3 Vdc supply voltage, the PMxxx - Series provides LVPECL Differential Outputs with an enable / disable function. The design utilizes PLL multiplication to produce a high frequency output from a low frequency fundamental crystal. Operating Specifications Parameter Minimum Nominal Maximum Units Notes Output Frequency (Fo) 98 - 673 MHz 1 Total Frequency Tolerance (See Ordering Information or Model Matrix for full part number) Model PMx4x -20 - 20 ppm 2 Model PMx1x -25 - 25 ppm 2 Model PMx2x -50 - 50 ppm 2 Model PMx3x -100 - 100 ppm 2 Operating Temperature Range (See Ordering Information or Model Matrix for full part number) Model PM1xx 0 - 70 °C Model PM2xx -40 - 85 °C Model PM3xx 0 - 85 °C Model PM4xx -20 - 70 °C Supply Voltage (Vcc) (See Ordering Information or Model Matrix for full part number) Model PMxx2 2.375 2.5 2.625 Vdc Model PMxx3 3.135 3.3 3.465 Vdc Supply Current (Icc) - 85 95 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter - 0.6 1.0 ps RMS SSB Phase Noise (Fo = 155.52 MHz) @ 10 Hz offset - -40 - dBc/Hz @ 100 Hz offset - -75 - dBc/Hz @ 1 KHz offset - -95 - dBc/Hz @ 10 KHz offset - -110 - dBc/Hz @ 100 KHz offset - -115 - dBc/Hz Sub-Harmonics - -60 -50 dBc Start-Up Time - - 2 ms Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage -0.5 - Vcc + 0.5 Vdc Features: Model PMxxx - Series 5x7mm Surface Mount Package 2.5 or 3.3 Vdc Operation LVPECL Differential Outputs Frequency Stabilities Available: +/-20 ppm, +/-25 ppm, +/-50 ppm or +/-100 ppm Temperature Ranges Available: 0 to 70°C, -40 to 85°C, 0 to 85°C or -20 to 70°C Low Jitter <1ps RMS Tri-State Enable/Disable on Pad 1 Tape and Reel Packaging RoHS Compliant / Lead FreeBulletin Ec262 Page 1 of 2 Revision 01 Date 10 Mar 2011 US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Enable / Disable Input Characteristics Parameter Minimum Nominal Maximum Units Notes Enable Input Voltage - (High) -(Vih) 70%Vcc - - Vdc 3 Disable Input Voltage - (Low) - (Vil) - - 30%Vcc Vdc 3 LVPECL Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load - - 50 - Ohm 4 Voltage (High) (Voh) Vcc-1.025 - - V (Low) (Vol) - - Vcc-1.620 V Duty Cycle at 50% Level 45 50 55 % 5 Rise / Fall Time: 20% to 80% - 0.3 0.6 ns CW 1040 PM123155.52MHz Notes: 1. All output frequencies may not be available, please contact the factory with your output frequency requirements. 2. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging. 3. When the oscillator is disabled the outputs are at high impedance. Outputs are enabled with no connection on E/D pad 1. 4. Outputs must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 5. Duty cycle measured at 50% of output voltage swing. Package Characteristics Package Hermetically sealed ceramic package and metal cover Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process; RoHS compliant lead free. See soldering profile on page 2.

Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Bulletin EC262 Page 2 of 2 Revision 01 Date 10 Mar 2011 Dimensional Tolerance: ±.02” (.508mm) ±.005” (.127mm) Suggested Pad Layout Output Waveform Tape and Reel Dimensions Pad Connections Pad 1 Input: Output State: Low: Disabled (High Impedance) High or Open: Enabled Solder Profile 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C Enable / Disable Function 0.200 (5.08mm) 0.100 (2.54mm) 0.079 (2.0mm) 0.165 (4.2mm) 0.070 (1.78mm) Bypass Capacitor 0.01uF Ground Top V iew 456 321 Q Q 50% 20% 80% tr Duty Cycle tf CW 1040 PM123

155.52 MHZ

.069 (1.75mm) 0.275 (7.0mm) 0.197 (5.0mm) 0.102 (2.6mm) 0.055 (1.4mm) Dimensional T olerance Vcc R 1 /R3 R2 /R4 2.5V 250 Oh ms 62.5Ohms 3.3V 130 Oh ms 82 Oh ms E/D 1 2 3 6 5 4 Vcc =Vcc2 N/C Package Outline Type LVPECL Clock Series 5x7 mm Temperature Range 1 = 0 to 70°C 2 = -40 to 85°C 3 = 0 to 85°C 4 = -20 to 70°C Frequency Tolerance 4 = ±20 ppm 1 = ±25 ppm 2 = ±50 ppm 3 = ±100 ppm Output Frequency Frequency Format -xxx.xM Min -xxx.xxxxxxM Max *Amount of numbers after the decimal point. M = MHz PM 1 2 - 155.52M Supply Voltage 2 = 2.5 Vdc, 3 = 3.3 Vdc,

Ordering Information

Example Part Number: PM123-155.52M = LVPECL Output, 0 to 70°C, +/-50ppm, 3.3Vdc, E/D Pad 1, Output Frequency 155.52 MHz Note: Not all temperature and frequency tolerance combinations are available. See Model Matrix below for available models 1: Enable / Disable

2 N/C

3: Ground 4: Output Q 5: Complementary Output Q 6: Supply Voltage (Vcc) Frequency Tolerance ±20 ppm Frequency Tolerance ±25 ppm Frequency Tolerance ±50 ppm Frequency Tolerance ±100 ppm Supply Voltage Temperature Range PM142 PM112 PM122 PM132 2.5 Vdc 0 to 70°C PM442 PM412 PM422 PM432 2.5 Vdc -20 to 70°C PM342 PM312 PM322 PM332 2.5 Vdc 0 to 85°C X X PM222 PM232 2.5 Vdc -40 to 85°C PM143 PM113 PM123 PM133 3.3 Vdc 0 to 70°C PM443 PM413 PM423 PM433 3.3 Vdc -20 to 70°C PM343 PM313 PM323 PM333 3.3 Vdc 0 to 85°C X X PM223 PM233 3.3 Vdc -40 to 85°C Model Matrix X = Models not available Test Circuit