PMP92 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 1 Description: This series of AC/DC switching power supplies are for 90watts of continuous output power. They are enclosed in a 94V-0rated polycarbonate case with an IEC320/C8or IEC320/C6 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications. Features:

  • High efficiency
  • Operation up t o 5000 meters
  • Low safety ground leakage current
  • Wide input range 90 to 264 VAC
  • 100% burn-in
  • Overvoltage protection
  • Over-temperature protection
  • Short-circuit protection
  • Compliant with DOE Efficiency level VI requirement * No load power consumption less than 0.21W * Average active efficiency greater than 88%
  • Compliant with RoHS requirements
  • IEC 60601-1-2 4th Edition EMC Compliant Output Average Active Efficiency (typical) @115/230 Vac Model Class-I Class-II V1 Min. Current Max. Current Tol. Ripple & Noise2 Max. Power PMP92-12 PMP92S-12 PMP92SF-12 12V 12V 7.5A 7.5A ±5% 200mV 200mV 90W 90W 88/89% PMP92-13-1 PMP92S-13-1 PMP92SF-13-1 15V 18V 5A ±5% 300mV 300mV 90W 90W 88/89% PMP92-13-2 PMP92S-13-2 PMP92SF-13-2 19V 19V 4.74A 4.74A ±5% 300mV 300mV 90W 90W 88/89% PMP92-14 PMP92S-14 PMP92SF-14 24V 24V 3.75A 3.75A ±5% 300mV 300mV 90W 90W 88/89% NOTES: 1. Class-I models are equipped with IEC320/C6 inlet, and Class-II models with IEC320/C8 inlet 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and 100%load with a 47μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 2 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E211696 TÜV EN 60601-1 EMI Standard EN55011/EN55022, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ± 8KV contact EN61000-4-3: Radiated immunity, 10V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 10Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms, and 100% reduction for 10ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90 to 264VAC Input Frequency Range 47 to 63Hz Input Current 1.5A (rms) for 115 VAC 0.6A (rms) for 230 VAC Earth Leakage Current 220μA max. @ 264VAC, 63Hz Touch Current 100μA max. @ 264 VAC, 63Hz Output Specifications Ripple & Noise 200 mVP-P maximum on 12V, 300 mVP-P maximum on other voltage outputs (15,18V, 19V and 24V) Overvoltage Protection Provided and set at 112-140% of nominal output voltage Overcurrent Protection Protected to short circuit conditions Temperature Coefficient ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Environmental Specifications Operating Temperature -0°C to +60°C Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating Derate from 100% at +40°C, Linearly to 50% at +60°C General Specifications Switching Frequency 75 KHz to 150 KHz Power Factor 0.98 typical Efficiency 88% minimum Hold-up Time 10ms minimum at 110 VAC Line Regulation ±0.5% maximum at full load Inrush Current 50A @ 115VAC or 100A @ 230VAC, at 25°C cold start Withstand Voltage 4000 VAC from input to output (2 MOPP)

1500 VAC from input to ground (1 MOPP)

MTBF 100,000 hours at full load at 25°C ambient, calculated per MIL- HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 4 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams