PMP90 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 1 Description: The PMP90 series of AC/DC switching power supplies are for 60-90 watts of continuous output power. They are enclosed in a 94V-0 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications. Features:

  • Low safety ground leakage current
  • Wide input range 90 to 264 VAC
  • Optional output connectors
  • 100% burn-in
  • Overvoltage protection
  • Over-temperature protection
  • Overcurrent protection
  • Compliant with CEC and Energy Star Efficiency level IV requirements (except models PMP90-10, PMP90-10-1 and PMP90-11)
  • No load power consumption less than 0.5W
  • Average active efficiency greater than 85%
  • Compliant with RoHS requirements
  • IEC 60601-1-2 4th Edition EMC Compliant Model1 Output Average Active Efficiency (typical) @115/230 Vac Class-I Class-II V1 Min. Current Max. Current Tol. Ripple & Noise2 Max. Power PMP90-10 PMP90F-10 5V 0A 12A ±5% 100mV 60W 78/79% PMP90-10-1 PMP90F-10-1 6V 0A 10A ±5% 100mV 60W 78/79% PMP90-11 PMP90F-11 9V 0A 7.78A ±5% 100mV 70W 81/82% PMP90-12 PMP90F-12 12V 0A 6.67A ±5% 120mV 80W 86/85% PMP90-12-1 PMP90F-12-1 13.5V 0A 6.3A ±5% 135mV 85W 86/85% PMP90-13 PMP90F-13 15V 0A 5.67A ±5% 150mV 85W 86/85% PMP90-13-1 PMP90F-13-1 18V 0A 5A ±5% 180mV 90W 86/85% PMP90-13-2 PMP90F-13-2 19V 0A 4.74A ±5% 190mV 90W 86/86% PMP90-14 PMP90F-14 24V 0A 3.75A ±5% 240mV 90W 87/86% PMP90-16 PMP90F-16 30V 0A 3A ±5% 300mV 90W 87/86% PMP90-18 PMP90F-18 48V 0A 1.87A ±5% 480mV 90W 88/87% NOTES: 1. Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C18 inlet. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 2 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E178020 TÜV EN 60601-1 EMI Standard EN55011/EN55022, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ± 8KV contact EN61000-4-3: Radiated immunity, 10V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 10Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms, and 100% reduction for 10ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90 to 264VAC Input Frequency Range 47 to 63Hz Input Current 1.2A (rms) for 115 VAC or 0.6A (rms) for 230 VAC Earth Leakage Current 180μA max. @ 264VAC, 63Hz Touch Current 100μA max. @ 264 VAC, 63Hz Output Specifications Ripple & Noise 100 mVp-p maximum on 5V, 6V and 9V outputs, 1% maximum on other voltage outputs (12V, 13.5V …, 48V etc.) Overvoltage Protection Provided and set at 112-140% of nominal output voltage Overcurrent Protection Protected to short circuit conditions Temperature Coefficient ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Environmental Specifications Operating Temperature 0°C to +60°C (see derating) Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating Derate from 100% at +40°C, Linearly to 50% at +60°C General Specifications Switching Frequency 50-110KHz Power Factor 0.98 typical Efficiency 85% min. (except 77% min. for PMP90-10, PMP90-10-1, PMP90-11 and PMP90-12) Hold-up Time 15ms minimum at 110 VAC Line Regulation ±0.5% maximum at full load Inrush Current 50A @ 115VAC or 100A @ 230VAC, at 25°C cold start Withstand Voltage 5600VDC from input to output (2 MOPP) 2100VDC from input to ground (1 MOPP) 700VDC from output to ground (To verify AC strength, get correct test method to avoid power sup- ply damage.) For Class II models, 4000 VAC from input to output) MTBF 150,000 hours at full load at 25°C ambient, calculated per MIL- HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams