PMP60N1 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 15/07/2020 Page: 1 Description: The PMP60N1 series of AC/DC switching power supplies are for 60 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FCC class B emission limits, and are designed for medical and ITE applications. Features:

  • Operation up to 5000 metres
  • Optional on/off switch
  • Optional output connectors
  • 100% burn in
  • Wide input range 90-264 VAC
  • Input serge current protection
  • Overvoltage protection
  • Overcurrent protection
  • Over-temperature protection
  • Compliant with DoE Efficiency level VI requirements (except PMP60N1-12)
  • Compliant with RoHS requirement
  • IEC 60601– 1-1-2 4th Edition EMC Compliant Model Output Average Efficiency @115/230 Vac V1 Min. Current Max. Current Tol. Ripple & Noise (1) Max. Out- put Power PMP60N1-12 11-13V 0A 5.46A ±5% 110-130mV 60W 88/88% PMP60N1-13 13-17V 0A 4.62A ±5% 130-170mV 60W 88/89% PMP60N1-13-1 17-21V 0A 3.53A ±5% 170-210mV 60W 89/90% PMP60N1-14 21-27V 0A 2.86A ±5% 210-270mV 60W 88/89% PMP60N1-16 27-33V 0A 2.23A ±3% 270-330mV 60W 88/89% PMP60N1-17 33-39V 0A 1.82A ±3% 330-390mV 60W 88/89% PMP60N1-18 46-50V 0A 1.31A ±3% 460-500mV 60W 89/89% NOTES: 1. Ripple and noise is a maximum peak to peak voltage value measured at output within 20MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 15/07/2020 Page: 2 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E178020 TÜV EN 60601-1 EMI Standard EN55011 / EN55022: Class B conducted, class B radiated FCC: Class B conducted, class B radiated VCCI: Class B conducted, class B radiated EMC Performance EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ±8 KV contact EN61000-4-3: Radiated immunity, 10 V/m for 80-2500 MHz EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com EN61000-4-6: Conducted immunity, 10 Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 20 ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90-264VAC Input Frequency Range 47-63 Hz Input Current 1.22 A (rms) for 100 VAC

0.68 A (rms) for 240 VAC

Earth Leakage Current 200 μA max. @ 264 VAC, 63 Hz Touch current 100 µA max. @ 264 VAC, 63 Hz Output Specifications Ripple and Noise 1% peak to peak maximum Overvoltage Protection Set at 112-140% of its nominal output voltage Overcurrent Protection Outputs protected to short circuit conditions Temperature Coefficient ±0.04% /°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Environmental Specifications Operating Temperature 20 °C to +60 °C (See Derating) Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating De-rate from 100% at +40°C linearly to 50% at +60°C General Specifications Switching frequency 20 KHz - 130 KHz Hold-up Time 20 ms typical at 110 VAC Line Regulation ±0.5% maximum at full load Inrush Current 60 A @ 115 VAC or 120 A @ 230 VAC, at 25℃ cold start Withstand Voltage

5600 VDC from input to output (2 MOPP)

2100 VDC from input to ground (1 MOPP)

700 VDC from output to ground

(To verify AC strength, get correct test method to avoid power supply damage.) MTBF 150,000 hours minimum at full load at 25℃ ambient, calculated per MIL- HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 15/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams