PMP60 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 14/07/2020 Page: 1 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Description: The PMP60 series of AC/DC switching power supplies are for 30-60 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC320/C14 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications. Features:

  • 12 standard desktop models
  • Single, dual or triple outputs
  • Optional output connectors
  • Optional on/off switch
  • 100% burn in
  • Wide input range 90-264VAC
  • Input surge current protection
  • Overvoltage protection
  • Over-temperature protection
  • Overcurrent protection
  • Single output models compliant with CEC and Energy Star Efficiency Level IV requirements
  • No load power consumption less than 0.5W
  • Average active efficiency Compliant with RoHS requirement
  • ICE 60601-1-2 4th Edition EMC Compliant Model Output 1 Output 2 Max. Output Power Output 3 V1 Min Current Max Current Tol V2 Min Current Max Current Tol V3 Min Current Max Current Tol PMP60N1-12 11-13V 0A 5.46A ±5% N/A 60W PMP60N1-13 13-17V 0A 4.62A ±5% 60W PMP60N1-13-1 17-21V 0A 3.53A ±5% 60W PMP60N1-14 21-27V 0A 2.86A ±5% 60W PMP60N1-16 27-33V 0A 2.23A ±3% 60W PMP60N1-17 33-39V 0A 1.82A ±3% 60W PMP60N1-18 46-50V 0A 1.31A ±3% 60W PMP60-23 5V 1A 5A ±5% 12V 0.5A 3A ±5% N/A 40W PMP60-30 3.3V 1A 6A ±5% 5V 0.5A 3A ±5% 12V 0.1A 0.7A ±10% 30W PMP60-31 5V 1A 5A ±5% 12V 0.5A 3A ±5% -12V 0.1A 0.7A ±10% 40W PMP60-32 5V 1A 5A ±5% 15V 0.4A 2.3A ±5% -15V 0.1A 0.7A ±10% 40W PMP60-36 5V 1A 5A ±5% 24V 0.3A 1.5A ±5% 12V 0.1A 0.7A ±10% 40W Notes: 1. The output voltages of a multiple output model may go outside of the stated tolerance when an output load current is out of stated limits. All models may be operated at no-load without damage. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. RoHS

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 14/07/2020 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E178020 TÜV EN 60601-1 EMI Standard EN55011, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ± 8KV contact EN61000-4-3: Radiated immunity, 10V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 10Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 10 ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90 to 264VAC Input Frequency Range: Input 47 to 63Hz Input Current 1.22 A (rms) for 100 VAC

0.68 A (rms) for 240 VAC

Earth Leakage Current 200μA max. @ 264VAC, 63Hz Touch Current 100μA max. @ 264 VAC, 63Hz Output Specifications Ripple & Noise 66 mVp-p maximum on 3.3 V output 100 mVp-p maximum on 5 V output 1% maximum on other voltage outputs (12 V, 15 V …, 48 V etc.) Overvoltage Protection Provided on output #1 only, set at 112-140% of its nominal output volt- age Overcurrent Protection All outputs protected to short circuit conditions Temperature Coefficient ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Environmental Specifications Operating Temperature -0°C to +60°C (See Derating) Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating Derate from 100% at +40° linearly to 50% at +60° General Specifications Switching Frequency 20/40 KHz to 130 KHz Efficiency 85% minimum on single output models, 68-74% minimum on the others Hold-up Time 10ms minimum at 110 VAC Line Regulation ±0.5% maximum at full load Inrush Current 50 A @ 115 VAC or 100 A @ 230 VAC, at 25°C cold start Withstand Voltage

5600 VDC from input to output (2 MOPP)

2100 VDC from input to ground (1 MOPP)

700 VDC from output to ground (To verify AC strength, get correct test

method to avoid power supply damage.) MTBF 150,000 hours minimum at full load at 25℃ ambient, calculated per MIL- HDBK-217F Ingress Protection: IP22 Compliant

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 14/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600