PMP30M TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 21/07/2020 Page: 1 Description: The PMP30 series of AC/DC wall mount switching power supplies are for 20-30 watts of continuous output power. They are enclosed in a 94V-0 rated polycarbonate case. The PMP30M models are shipped with a selected interchangeable AC plug, and additional types of AC plug can be purchased from the factory. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications. Features:

  • Operation altitude up to 5000 meters
  • BF class insulation
  • Interchangeable AC plugs for PMP30M models
  • Meet IP22(except PMP30M models)
  • Overvoltage protection
  • Over-temperature protection
  • Short-circuit protection
  • 100% burn-in at full rated load
  • Compliant with DoE efficiency level VI requirements
  • Compliant with RoHS requirements Model1 Output Average Active Efficiency (typical) @ 115/230VAC V1 Min. Current Max. Current Tol. Ripple & Noise2 Max. Output Power PMP30M-10 PMP30NP-10 PMP30E-10 5V 0A 4A ±5% 100mV 20W 83.5/83.5% PMP30M-10-2-A PMP30NP-10-2 PMP30E-10-2 7.5V 0A 3A ±5% 100mV 22.5W 86/86% PMP30M-11 PMP30NP-11 PMP30E-11 9V 0A 3A ±5% 100mV 27W 87/87% PMP30M-11-1 PMP30NP-11-1 PMP30E-11-1 10V 0A 2.7A ±5% 100mV 27W 87/87% PMP30M-12 PMP30NP-12 PMP30E-12 12V 0A 2.5A ±5% 120mV 30W 87.5/87.5% PMP30M-13 PMP30NP-13 PMP30E-13 15V 0A 2A ±5% 150mV 30W 87.5/87.5% PMP30M-13-1 PMP30NP-13-1 PMP30E-13-1 18V 0A 1.67A ±5% 180mV 30W 87.5/87.5% PMP30M-14 PMP30NP-14 PMP30E-14 24V 0A 1.25A ±5% 240mV 30W 87.5/87.5% PMP30M-16 PMP30NP-16 PMP30E-16 30V 0A 1A ±5% 300mV 30W 87.5/87.5% PMP30M-18 PMP30NP-18 PMP30E-18 48V 0A 0.63A ±5% 480mV 30W 87.5/87.5% NOTES: 1. PMP30M models are equipped with an interchangeable AC plug, one of the 4 available types shown in note #5 in Mechanical Speci fications below. PMP30M-1X-A models are shipped with North American plug, PMP30M-1X-C models with European plug, and so on, while PMP30M-1X-P designated models are shipped with 4 available plugs, one attached and the rest enclosed. PMP30NP models are with fixed North American A C plug, and PMP30E models with European plug. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 21/07/2020 Page: 2 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E211696 TÜV EN 60601-1 EMI Standard EN55011, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ± 8KV contact EN61000-4-3: Radiated immunity, 10V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1 KV diff. EN61000-4-6: Conducted immunity, 10Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms, and >95% reduction for 10ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 80 to 264 VAC Input Frequency Range 47 to 63Hz Input Current 1A (rms) @115VAC, 60 Hz 0.6A( rms) @230VAC, 50 Hz Touch Current 100μA max. @ 264 VAC, 63Hz Output Specifications Overvoltage Protection Set at 112% to 140% of its nominal output voltage Short circuit protection Automatic recovery Over temperature protection Latching by recycle input to reset Temperature Coefficient ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Environmental Specifications Operating Temperature -20°C to +60°C Storage Temperature -40°C to +85°C Relative Humidity 10% to 90% non-condensing Temperature Derating Derate from 100% at 40°C linearly to 50% at 60°C General Specifications Hold-up Time 8ms minimum at 115 VAC Turn on Delay Time 3s maximum at 115 VAC Efficiency Compliant with DoE efficiency level VI requirements Line Regulation ±1% maximum at full load Inrush Current 60A @ 115VAC or 120A @ 230VAC at 25°C cold start Withstand Voltage 4000 VAC from input to output (2 MOPP) MTBF 300,000 hours at full load at 25°C ambient, calculated per MIL- HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 21/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams 1. PMP30M models (Interchangeable AC Plug)

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 21/07/2020 Page: 4 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 2. PMP30NP models (Fixed North American AC Plug, Non-Polarization) 2. PMP30E models (Fixed European AC Plug)